From: Vanessa Borgmann <ness...@web.de>
Fix errors: space errors, braces
Fix warnings: comment warnings
Signed-off-by: Oliver Hübers <oliver.hueb...@web.de>
Signed-off-by: Vanessa Borgmann <ness...@web.de>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 230 ++++++++++++++++----------------
1 file changed, 112 insertions(+), 118 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c
b/drivers/staging/mt7621-pci/pci-mt7621.c
index e092b5d..d0d3fb9 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -21,11 +21,6 @@
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
**************************************************************************
* May 2007 Bruce Chang
* Initial Release
@@ -62,20 +57,20 @@
* devices.
*/
-#define RALINK_PCIE0_CLK_EN (1<<24)
-#define RALINK_PCIE1_CLK_EN (1<<25)
-#define RALINK_PCIE2_CLK_EN (1<<26)
+#define RALINK_PCIE0_CLK_EN (1 << 24)
+#define RALINK_PCIE1_CLK_EN (1 << 25)
+#define RALINK_PCIE2_CLK_EN (1 << 26)
#define RALINK_PCI_CONFIG_ADDR 0x20
#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
-#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE +
0x0028)
-#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE +
0x002C)
-#define RALINK_PCIE0_RST (1<<24)
-#define RALINK_PCIE1_RST (1<<25)
-#define RALINK_PCIE2_RST (1<<26)
-
-#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
0x0000)
-#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
0x000C)
+#define RALINK_PCI_MEMBASE (*(volatile u32 *)(RALINK_PCI_BASE +
0x0028))
+#define RALINK_PCI_IOBASE (*(volatile u32 *)(RALINK_PCI_BASE +
0x002C))
+#define RALINK_PCIE0_RST (1 << 24)
+#define RALINK_PCIE1_RST (1 << 25)
+#define RALINK_PCIE2_RST (1 << 26)
+
+#define RALINK_PCI_PCICFG_ADDR (*(volatile u32 *)(RALINK_PCI_BASE +
0x0000))
+#define RALINK_PCI_PCIMSK_ADDR (*(volatile u32 *)(RALINK_PCI_BASE +
0x000C))
#define RALINK_PCI_BASE 0xBE140000
#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
@@ -83,49 +78,49 @@
#define RT6855_PCIE1_OFFSET 0x3000
#define RT6855_PCIE2_OFFSET 0x4000
-#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0010)
-#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0018)
-#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0030)
-#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0034)
-#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0038)
-#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0050)
-#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0060)
-#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0064)
-
-#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0010)
-#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0018)
-#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0030)
-#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0034)
-#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0038)
-#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0050)
-#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0060)
-#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0064)
-
-#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0010)
-#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0018)
-#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0030)
-#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0034)
-#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0038)
-#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0050)
-#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0060)
-#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0064)
+#define RALINK_PCI0_BAR0SETUP_ADDR (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0010))
+#define RALINK_PCI0_IMBASEBAR0_ADDR (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0018))
+#define RALINK_PCI0_ID (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0030))
+#define RALINK_PCI0_CLASS (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0034))
+#define RALINK_PCI0_SUBID (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0038))
+#define RALINK_PCI0_STATUS (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0050))
+#define RALINK_PCI0_DERR (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0060))
+#define RALINK_PCI0_ECRC (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0064))
+
+#define RALINK_PCI1_BAR0SETUP_ADDR (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0010))
+#define RALINK_PCI1_IMBASEBAR0_ADDR (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0018))
+#define RALINK_PCI1_ID (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0030))
+#define RALINK_PCI1_CLASS (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0034))
+#define RALINK_PCI1_SUBID (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0038))
+#define RALINK_PCI1_STATUS (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0050))
+#define RALINK_PCI1_DERR (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0060))
+#define RALINK_PCI1_ECRC (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0064))
+
+#define RALINK_PCI2_BAR0SETUP_ADDR (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0010))
+#define RALINK_PCI2_IMBASEBAR0_ADDR (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0018))
+#define RALINK_PCI2_ID (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0030))
+#define RALINK_PCI2_CLASS (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0034))
+#define RALINK_PCI2_SUBID (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0038))
+#define RALINK_PCI2_STATUS (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0050))
+#define RALINK_PCI2_DERR (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0060))
+#define RALINK_PCI2_ECRC (*(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0064))
#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
#define MV_WRITE(ofs, data) \
- *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
+ (*(volatile u32 *)(RALINK_PCI_BASE + (ofs)) = cpu_to_le32(data))
#define MV_READ(ofs, data) \
- *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
+ (*(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE + (ofs))))
#define MV_WRITE_16(ofs, data) \
- *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data)
+ (*(volatile u16 *)(RALINK_PCI_BASE + (ofs)) = cpu_to_le16(data))
#define MV_READ_16(ofs, data) \
- *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs)))
+ (*(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE + (ofs))))
#define MV_WRITE_8(ofs, data) \
- *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data
+ (*(volatile u8 *)(RALINK_PCI_BASE + (ofs)) = data)
#define MV_READ_8(ofs, data) \
- *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs))
+ (*(data) = *(volatile u8 *)(RALINK_PCI_BASE + (ofs)))
#define RALINK_PCI_MM_MAP_BASE 0x60000000
#define RALINK_PCI_IO_MAP_BASE 0x1e160000
@@ -152,23 +147,23 @@
#define PPLL_CFG1 0x9c
#define PPLL_DRV 0xa0
/* SYSC_REG_SYSTEM_CONFIG1 bits */
-#define RALINK_PCI_HOST_MODE_EN (1<<7)
-#define RALINK_PCIE_RC_MODE_EN (1<<8)
+#define RALINK_PCI_HOST_MODE_EN (1 << 7)
+#define RALINK_PCIE_RC_MODE_EN (1 << 8)
//RALINK_RSTCTRL bit
-#define RALINK_PCIE_RST (1<<23)
-#define RALINK_PCI_RST (1<<24)
+#define RALINK_PCIE_RST (1 << 23)
+#define RALINK_PCI_RST (1 << 24)
//RALINK_CLKCFG1 bit
-#define RALINK_PCI_CLK_EN (1<<19)
-#define RALINK_PCIE_CLK_EN (1<<21)
+#define RALINK_PCI_CLK_EN (1 << 19)
+#define RALINK_PCIE_CLK_EN (1 << 21)
//RALINK_GPIOMODE bit
-#define PCI_SLOTx2 (1<<11)
-#define PCI_SLOTx1 (2<<11)
+#define PCI_SLOTx2 (1 << 11)
+#define PCI_SLOTx1 (2 << 11)
//MTK PCIE PLL bit
-#define PDRV_SW_SET (1<<31)
-#define LC_CKDRVPD_ (1<<19)
+#define PDRV_SW_SET (1 << 31)
+#define LC_CKDRVPD_ (1 << 19)
#define MEMORY_BASE 0x0
-static int pcie_link_status = 0;
+static int pcie_link_status;
#define PCI_ACCESS_READ_1 0
#define PCI_ACCESS_READ_2 1
@@ -185,7 +180,7 @@ static inline u32 mt7621_pci_get_cfgaddr(unsigned int bus,
unsigned int slot,
}
static int config_access(unsigned char access_type, struct pci_bus *bus,
- unsigned int devfn, unsigned int where, u32 *data)
+ unsigned int devfn, unsigned int where, u32 *data)
{
unsigned int slot = PCI_SLOT(devfn);
u8 func = PCI_FUNC(devfn);
@@ -197,23 +192,21 @@ static int config_access(unsigned char access_type,
struct pci_bus *bus,
address = mt7621_pci_get_cfgaddr(bus->number, slot, func, where);
- MV_WRITE(address_reg, address);
-
switch (access_type) {
case PCI_ACCESS_WRITE_1:
- MV_WRITE_8(data_reg+(where&0x3), *data);
+ MV_WRITE_8(data_reg + (where & 0x3), *data);
break;
case PCI_ACCESS_WRITE_2:
- MV_WRITE_16(data_reg+(where&0x3), *data);
+ MV_WRITE_16(data_reg + (where & 0x3), *data);
break;
case PCI_ACCESS_WRITE_4:
MV_WRITE(data_reg, *data);
break;
case PCI_ACCESS_READ_1:
- MV_READ_8(data_reg+(where&0x3), data);
+ MV_READ_8(data_reg + (where & 0x3), data);
break;
case PCI_ACCESS_READ_2:
- MV_READ_16(data_reg+(where&0x3), data);
+ MV_READ_16(data_reg + (where & 0x3), data);
break;
case PCI_ACCESS_READ_4:
MV_READ(data_reg, data);
@@ -275,9 +268,9 @@ pci_config_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u3
{
switch (size) {
case 1:
- return read_config_byte(bus, devfn, where, (u8 *) val);
+ return read_config_byte(bus, devfn, where, (u8 *)val);
case 2:
- return read_config_word(bus, devfn, where, (u16 *) val);
+ return read_config_word(bus, devfn, where, (u16 *)val);
default:
return read_config_dword(bus, devfn, where, val);
}
@@ -288,9 +281,9 @@ pci_config_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u
{
switch (size) {
case 1:
- return write_config_byte(bus, devfn, where, (u8) val);
+ return write_config_byte(bus, devfn, where, (u8)val);
case 2:
- return write_config_word(bus, devfn, where, (u16) val);
+ return write_config_word(bus, devfn, where, (u16)val);
default:
return write_config_dword(bus, devfn, where, val);
}
@@ -319,7 +312,6 @@ read_config(unsigned long bus, unsigned long dev, unsigned
long func, unsigned l
address = mt7621_pci_get_cfgaddr(bus, dev, func, reg);
MV_WRITE(address_reg, address);
MV_READ(data_reg, val);
- return;
}
static void
@@ -332,7 +324,6 @@ write_config(unsigned long bus, unsigned long dev, unsigned
long func, unsigned
address = mt7621_pci_get_cfgaddr(bus, dev, func, reg);
MV_WRITE(address_reg, address);
MV_WRITE(data_reg, val);
- return;
}
int
@@ -363,7 +354,7 @@ pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
void
set_pcie_phy(u32 *addr, int start_b, int bits, int val)
{
- *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b);
+ *(unsigned int *)(addr) &= ~(((1 << bits) - 1) << start_b);
*(unsigned int *)(addr) |= val << start_b;
}
@@ -465,17 +456,20 @@ set_phy_for_ssc(void)
void setup_cm_memory_region(struct resource *mem_resource)
{
resource_size_t mask;
+
if (mips_cps_numiocu(0)) {
- /* FIXME: hardware doesn't accept mask values with 1s after
- * 0s (e.g. 0xffef), so it would be great to warn if that's
- * about to happen */
+ /*
+ *FIXME: hardware doesn't accept mask values with 1s after
+ *0s (e.g. 0xffef), so it would be great to warn if that's
+ *about to happen
+ */
mask = ~(mem_resource->end - mem_resource->start);
write_gcr_reg1_base(mem_resource->start);
write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
printk("PCI coherence region base: 0x%08llx, mask/settings:
0x%08llx\n",
- (unsigned long long)read_gcr_reg1_base(),
- (unsigned long long)read_gcr_reg1_mask());
+ (unsigned long long)read_gcr_reg1_base(),
+ (unsigned long long)read_gcr_reg1_mask());
}
}
@@ -494,12 +488,12 @@ static int mt7621_pci_probe(struct platform_device *pdev)
ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST |
RALINK_PCIE2_RST);
- *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3);
- *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3;
+ *(unsigned int *)(0xbe000060) &= ~(0x3 << 10 | 0x3 << 3);
+ *(unsigned int *)(0xbe000060) |= 0x1 << 10 | 0x1 << 3;
mdelay(100);
- *(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use
GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
+ *(unsigned int *)(0xbe000600) |= 0x1 << 19 | 0x1 << 8 | 0x1 << 7; //
use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3)
mdelay(100);
- *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7);
// clear DATA
+ *(unsigned int *)(0xbe000620) &= ~(0x1 << 19 | 0x1 << 8 | 0x1 << 7);
// clear DATA
mdelay(100);
@@ -509,7 +503,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
DEASSERT_SYSRST_PCIE(val);
- if ((*(unsigned int *)(0xbe00000c)&0xFFFF) == 0x0101) // MT7621 E2
+ if ((*(unsigned int *)(0xbe00000c) & 0xFFFF) == 0x0101) // MT7621 E2
bypass_pipe_rst();
set_phy_for_ssc();
@@ -533,53 +527,54 @@ static int mt7621_pci_probe(struct platform_device *pdev)
rt_sysc_m32(RALINK_PCIE_RST, 0, RALINK_RSTCTRL);
/* Use GPIO control instead of PERST_N */
- *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7;
// set DATA
+ *(unsigned int *)(0xbe000620) |= 0x1 << 19 | 0x1 << 8 | 0x1 << 7;
// set DATA
mdelay(1000);
if ((RALINK_PCI0_STATUS & 0x1) == 0) {
printk("PCIE0 no card, disable it(RST&CLK)\n");
ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
- pcie_link_status &= ~(1<<0);
+ pcie_link_status &= ~(1 << 0);
} else {
- pcie_link_status |= 1<<0;
- RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
+ pcie_link_status |= 1 << 0;
+ RALINK_PCI_PCIMSK_ADDR |= (1 << 20); // enable pcie1 interrupt
}
if ((RALINK_PCI1_STATUS & 0x1) == 0) {
printk("PCIE1 no card, disable it(RST&CLK)\n");
ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
rt_sysc_m32(RALINK_PCIE1_CLK_EN, 0, RALINK_CLKCFG1);
- pcie_link_status &= ~(1<<1);
+ pcie_link_status &= ~(1 << 1);
} else {
- pcie_link_status |= 1<<1;
- RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
+ pcie_link_status |= 1 << 1;
+ RALINK_PCI_PCIMSK_ADDR |= (1 << 21); // enable pcie1 interrupt
}
if ((RALINK_PCI2_STATUS & 0x1) == 0) {
printk("PCIE2 no card, disable it(RST&CLK)\n");
ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
rt_sysc_m32(RALINK_PCIE2_CLK_EN, 0, RALINK_CLKCFG1);
- pcie_link_status &= ~(1<<2);
+ pcie_link_status &= ~(1 << 2);
} else {
- pcie_link_status |= 1<<2;
- RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt
+ pcie_link_status |= 1 << 2;
+ RALINK_PCI_PCIMSK_ADDR |= (1 << 22); // enable pcie2 interrupt
}
if (pcie_link_status == 0)
return 0;
-/*
-pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
-3'b000 x x x
-3'b001 x x 0
-3'b010 x 0 x
-3'b011 x 1 0
-3'b100 0 x x
-3'b101 1 x 0
-3'b110 1 0 x
-3'b111 2 1 0
-*/
+ /*
+ pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num
+ 3'b000 x x x
+ 3'b001 x x 0
+ 3'b010 x 0 x
+ 3'b011 x 1 0
+ 3'b100 0 x x
+ 3'b101 1 x 0
+ 3'b110 1 0 x
+ 3'b111 2 1 0
+ */
+
switch (pcie_link_status) {
case 2:
RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
@@ -606,10 +601,10 @@ pcie(2/1/0) link status pcie2_num pcie1_num
pcie0_num
break;
}
-/*
- ioport_resource.start = mt7621_res_pci_io1.start;
- ioport_resource.end = mt7621_res_pci_io1.end;
-*/
+ /*
+ * ioport_resource.start = mt7621_res_pci_io1.start;
+ * ioport_resource.end = mt7621_res_pci_io1.end;
+ */
RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE;
RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
@@ -641,26 +636,26 @@ pcie(2/1/0) link status pcie2_num pcie1_num
pcie0_num
switch (pcie_link_status) {
case 7:
read_config(0, 2, 0, 0x4, &val);
- write_config(0, 2, 0, 0x4, val|0x4);
+ write_config(0, 2, 0, 0x4, val | 0x4);
read_config(0, 2, 0, 0x70c, &val);
- val &= ~(0xff)<<8;
- val |= 0x50<<8;
+ val &= ~(0xff) << 8;
+ val |= 0x50 << 8;
write_config(0, 2, 0, 0x70c, val);
case 3:
case 5:
case 6:
read_config(0, 1, 0, 0x4, &val);
- write_config(0, 1, 0, 0x4, val|0x4);
+ write_config(0, 1, 0, 0x4, val | 0x4);
read_config(0, 1, 0, 0x70c, &val);
- val &= ~(0xff)<<8;
- val |= 0x50<<8;
+ val &= ~(0xff) << 8;
+ val |= 0x50 << 8;
write_config(0, 1, 0, 0x70c, val);
default:
read_config(0, 0, 0, 0x4, &val);
- write_config(0, 0, 0, 0x4, val|0x4); //bus master enable
+ write_config(0, 0, 0, 0x4, val | 0x4); //bus master enable
read_config(0, 0, 0, 0x70c, &val);
- val &= ~(0xff)<<8;
- val |= 0x50<<8;
+ val &= ~(0xff) << 8;
+ val |= 0x50 << 8;
write_config(0, 0, 0, 0x70c, val);
}
@@ -668,7 +663,6 @@ pcie(2/1/0) link status pcie2_num pcie1_num
pcie0_num
setup_cm_memory_region(mt7621_controller.mem_resource);
register_pci_controller(&mt7621_controller);
return 0;
-
}
int pcibios_plat_dev_init(struct pci_dev *dev)
--
2.7.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
