Rename the enumerated type RF90_RADIO_PATH_E to rf90_radio_path_e.
Whilst it is not flagged as an issue by checkpatch, types are meant
to be named in lowercase.
This change is purely a coding style change which should have no
impact on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitm...@gmail.com>
---
drivers/staging/rtl8192u/r8190_rtl8256.c | 42 ++++++++++++------------
drivers/staging/rtl8192u/r8192U_core.c | 4 +--
drivers/staging/rtl8192u/r819xU_phy.c | 38 ++++++++++-----------
drivers/staging/rtl8192u/r819xU_phy.h | 10 +++---
4 files changed, 47 insertions(+), 47 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c
b/drivers/staging/rtl8192u/r8190_rtl8256.c
index 9f35dcb9e13e..9b7f822e9762 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -41,16 +41,16 @@ void PHY_SetRF8256Bandwidth(struct net_device *dev, enum
ht_channel_width Bandwi
|| priv->card_8192_version
== VERSION_819xU_B) { /* 8256 D-cut,
E-cut, xiong: consider it later! */
rtl8192_phy_SetRFReg(dev,
- (enum RF90_RADIO_PATH_E)eRFPath,
+ (enum rf90_radio_path_e)eRFPath,
0x0b, bMask12Bits, 0x100); /*
phy para:1ba */
rtl8192_phy_SetRFReg(dev,
- (enum RF90_RADIO_PATH_E)eRFPath,
+ (enum rf90_radio_path_e)eRFPath,
0x2c, bMask12Bits, 0x3d7);
rtl8192_phy_SetRFReg(dev,
- (enum RF90_RADIO_PATH_E)eRFPath,
+ (enum rf90_radio_path_e)eRFPath,
0x0e, bMask12Bits, 0x021);
rtl8192_phy_SetRFReg(dev,
- (enum RF90_RADIO_PATH_E)eRFPath,
+ (enum rf90_radio_path_e)eRFPath,
0x14, bMask12Bits, 0x5ab);
} else {
RT_TRACE(COMP_ERR,
"PHY_SetRF8256Bandwidth(): unknown hardware version\n");
@@ -58,15 +58,15 @@ void PHY_SetRF8256Bandwidth(struct net_device *dev, enum
ht_channel_width Bandwi
break;
case HT_CHANNEL_WIDTH_20_40:
if (priv->card_8192_version == VERSION_819xU_A
|| priv->card_8192_version == VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong:
consider it later! */
- rtl8192_phy_SetRFReg(dev, (enum
RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); /* phy para:3ba */
- rtl8192_phy_SetRFReg(dev, (enum
RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df);
- rtl8192_phy_SetRFReg(dev, (enum
RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1);
+ rtl8192_phy_SetRFReg(dev, (enum
rf90_radio_path_e)eRFPath, 0x0b, bMask12Bits, 0x300); /* phy para:3ba */
+ rtl8192_phy_SetRFReg(dev, (enum
rf90_radio_path_e)eRFPath, 0x2c, bMask12Bits, 0x3df);
+ rtl8192_phy_SetRFReg(dev, (enum
rf90_radio_path_e)eRFPath, 0x0e, bMask12Bits, 0x0a1);
if (priv->chan == 3 || priv->chan == 9)
/* I need to set priv->chan
whenever current channel changes */
- rtl8192_phy_SetRFReg(dev, (enum
RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
+ rtl8192_phy_SetRFReg(dev, (enum
rf90_radio_path_e)eRFPath, 0x14, bMask12Bits, 0x59b);
else
- rtl8192_phy_SetRFReg(dev, (enum
RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
+ rtl8192_phy_SetRFReg(dev, (enum
rf90_radio_path_e)eRFPath, 0x14, bMask12Bits, 0x5ab);
} else {
RT_TRACE(COMP_ERR,
"PHY_SetRF8256Bandwidth(): unknown hardware version\n");
}
@@ -115,14 +115,14 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
u8 ConstRetryTimes = 5, RetryTimes = 5;
u8 ret = 0;
/* Initialize RF */
- for (eRFPath = (enum RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath <
priv->NumTotalRFPath; eRFPath++) {
+ for (eRFPath = (enum rf90_radio_path_e)RF90_PATH_A; eRFPath <
priv->NumTotalRFPath; eRFPath++) {
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
pPhyReg = &priv->PHYRegDef[eRFPath];
/* Joseph test for shorten RF config
- * pHalData->RfReg0Value[eRFPath] =
rtl8192_phy_QueryRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl,
bMaskDWord);
+ * pHalData->RfReg0Value[eRFPath] =
rtl8192_phy_QueryRFReg(dev, (enum rf90_radio_path_e)eRFPath, rGlobalCtrl,
bMaskDWord);
* ----Store original RFENV control type
*/
switch (eRFPath) {
@@ -146,12 +146,12 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,
b3WireAddressLength, 0x0); /* Set 0 to 4 bits for Z-serial and set 1 to 6 bits
for 8258 */
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength,
0x0); /* Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for
??? */
- rtl8192_phy_SetRFReg(dev, (enum RF90_RADIO_PATH_E) eRFPath,
0x0, bMask12Bits, 0xbf);
+ rtl8192_phy_SetRFReg(dev, (enum rf90_radio_path_e) eRFPath,
0x0, bMask12Bits, 0xbf);
/* Check RF block (for FPGA platform only)----
* TODO: this function should be removed on ASIC , Emily
2007.2.2
*/
- if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (enum
RF90_RADIO_PATH_E)eRFPath)) {
+ if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (enum
rf90_radio_path_e)eRFPath)) {
RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d]
Fail!!\n", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
}
@@ -162,32 +162,32 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
switch (eRFPath) {
case RF90_PATH_A:
while (RF3_Final_Value != RegValueToBeCheck &&
RetryTimes != 0) {
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,
(enum RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev,
(enum RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,
(enum rf90_radio_path_e)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(dev,
(enum rf90_radio_path_e)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final
value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_B:
while (RF3_Final_Value != RegValueToBeCheck &&
RetryTimes != 0) {
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,
(enum RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev,
(enum RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,
(enum rf90_radio_path_e)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(dev,
(enum rf90_radio_path_e)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final
value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_C:
while (RF3_Final_Value != RegValueToBeCheck &&
RetryTimes != 0) {
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,
(enum RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev,
(enum RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,
(enum rf90_radio_path_e)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(dev,
(enum rf90_radio_path_e)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final
value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_D:
while (RF3_Final_Value != RegValueToBeCheck &&
RetryTimes != 0) {
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,
(enum RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev,
(enum RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(dev,
(enum rf90_radio_path_e)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(dev,
(enum rf90_radio_path_e)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final
value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
diff --git a/drivers/staging/rtl8192u/r8192U_core.c
b/drivers/staging/rtl8192u/r8192U_core.c
index c99923d467a7..28592a8d6dd0 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -2897,7 +2897,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
*/
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath;
eRFPath++)
PHY_SetRFReg(Adapter,
- (enum RF90_RADIO_PATH_E)eRFPath,
+ (enum rf90_radio_path_e)eRFPath,
0x4, 0xC00, 0x0);
} else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) {
/* H/W or S/W RF OFF before sleep. */
@@ -2923,7 +2923,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
*/
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath;
eRFPath++)
PHY_SetRFReg(Adapter,
- (enum RF90_RADIO_PATH_E)eRFPath,
+ (enum rf90_radio_path_e)eRFPath,
0x4, 0xC00, 0x0);
}
}
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c
b/drivers/staging/rtl8192u/r819xU_phy.c
index c8c54484eab5..fb74b749fbcf 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -101,18 +101,18 @@ u32 rtl8192_QueryBBReg(struct net_device *dev, u32
reg_addr, u32 bitmask)
}
static u32 phy_FwRFSerialRead(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath,
+ enum rf90_radio_path_e eRFPath,
u32 offset);
static void phy_FwRFSerialWrite(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath,
+ enum rf90_radio_path_e eRFPath,
u32 offset,
u32 data);
/******************************************************************************
* function: This function reads register from RF chip
* input: net_device *dev
- * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ * rf90_radio_path_e eRFPath //radio path of A/B/C/D
* u32 offset //target address to be read
* output: none
* return: u32 readback value
@@ -124,7 +124,7 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
* ---need more spec for this information.
******************************************************************************/
static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath, u32 offset)
+ enum rf90_radio_path_e eRFPath, u32 offset)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 ret = 0;
@@ -191,7 +191,7 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
/******************************************************************************
* function: This function writes data to RF register
* input: net_device *dev
- * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ * rf90_radio_path_e eRFPath //radio path of A/B/C/D
* u32 offset //target address to be written
* u32 data //the new register data to be written
* output: none
@@ -209,7 +209,7 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
* ---------------------------------------------------------------------------
*****************************************************************************/
static void rtl8192_phy_RFSerialWrite(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath,
+ enum rf90_radio_path_e eRFPath,
u32 offset,
u32 data)
{
@@ -266,7 +266,7 @@ static void rtl8192_phy_RFSerialWrite(struct net_device
*dev,
/******************************************************************************
* function: This function set specific bits to RF register
* input: net_device dev
- * RF90_RADIO_PATH_E eRFPath //radio path of A/B/C/D
+ * rf90_radio_path_e eRFPath //radio path of A/B/C/D
* u32 reg_addr //target addr to be modified
* u32 bitmask //taget bit pos to be modified
* u32 data //value to be written
@@ -275,7 +275,7 @@ static void rtl8192_phy_RFSerialWrite(struct net_device
*dev,
* notice:
*****************************************************************************/
void rtl8192_phy_SetRFReg(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath,
+ enum rf90_radio_path_e eRFPath,
u32 reg_addr, u32 bitmask, u32 data)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -324,7 +324,7 @@ void rtl8192_phy_SetRFReg(struct net_device *dev,
* notice:
*****************************************************************************/
u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath,
+ enum rf90_radio_path_e eRFPath,
u32 reg_addr, u32 bitmask)
{
u32 reg, bitshift;
@@ -348,14 +348,14 @@ u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
/******************************************************************************
* function: We support firmware to execute RF-R/W.
* input: net_device *dev
- * RF90_RADIO_PATH_E eRFPath
+ * rf90_radio_path_e eRFPath
* u32 offset
* output: none
* return: u32
* notice:
****************************************************************************/
static u32 phy_FwRFSerialRead(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath,
+ enum rf90_radio_path_e eRFPath,
u32 offset)
{
u32 reg = 0;
@@ -412,7 +412,7 @@ static u32 phy_FwRFSerialRead(struct net_device *dev,
/******************************************************************************
* function: We support firmware to execute RF-R/W.
* input: net_device *dev
- * RF90_RADIO_PATH_E eRFPath
+ * rf90_radio_path_e eRFPath
* u32 offset
* u32 data
* output: none
@@ -420,7 +420,7 @@ static u32 phy_FwRFSerialRead(struct net_device *dev,
* notice:
****************************************************************************/
static void phy_FwRFSerialWrite(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath,
+ enum rf90_radio_path_e eRFPath,
u32 offset, u32 data)
{
u8 time = 0;
@@ -688,14 +688,14 @@ static void rtl8192_InitBBRFRegDef(struct net_device *dev)
* sure whether BB and RF is OK
* input: net_device *dev
* hw90_block_e CheckBlock
- * RF90_RADIO_PATH_E eRFPath //only used when checkblock is
+ * rf90_radio_path_e eRFPath //only used when checkblock is
* //HW90_BLOCK_RF
* output: none
* return: return whether BB and RF is ok (0:OK, 1:Fail)
* notice: This function may be removed in the ASIC
******************************************************************************/
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, enum hw90_block_e
CheckBlock,
- enum RF90_RADIO_PATH_E eRFPath)
+ enum rf90_radio_path_e eRFPath)
{
u8 ret = 0;
u32 i, CheckTimes = 4, reg = 0;
@@ -790,7 +790,7 @@ static void rtl8192_BB_Config_ParaFile(struct net_device
*dev)
eCheckItem <= HW90_BLOCK_PHY1; eCheckItem++) {
/* don't care RF path */
status = rtl8192_phy_checkBBAndRF(dev, (enum
hw90_block_e)eCheckItem,
- (enum RF90_RADIO_PATH_E)0);
+ (enum rf90_radio_path_e)0);
if (status != 0) {
RT_TRACE((COMP_ERR | COMP_PHY),
"PHY_RF8256_Config(): Check PHY%d Fail!!\n",
@@ -962,13 +962,13 @@ void rtl8192_phy_updateInitGain(struct net_device *dev)
* function: This function read RF parameters from general head file,
* and do RF 3-wire
* input: net_device *dev
- * RF90_RADIO_PATH_E eRFPath
+ * rf90_radio_path_e eRFPath
* output: none
* return: return code show if RF configuration is successful(0:pass,
1:fail)
* notice: Delay may be required for RF configuration
*****************************************************************************/
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath)
+ enum rf90_radio_path_e eRFPath)
{
int i;
@@ -1386,7 +1386,7 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device
*dev, u8 channel,
case CMD_ID_RF_WRITE_REG:
for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) {
rtl8192_phy_SetRFReg(dev,
- (enum
RF90_RADIO_PATH_E)eRFPath,
+ (enum
rf90_radio_path_e)eRFPath,
CurrentCmd->para_1,
bZebra1_ChannelNum,
CurrentCmd->para_2);
diff --git a/drivers/staging/rtl8192u/r819xU_phy.h
b/drivers/staging/rtl8192u/r819xU_phy.h
index d9503996457d..1ad459cf05ae 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.h
+++ b/drivers/staging/rtl8192u/r819xU_phy.h
@@ -33,7 +33,7 @@ enum hw90_block_e {
HW90_BLOCK_MAXIMUM = 4, /* Never use this */
};
-enum RF90_RADIO_PATH_E {
+enum rf90_radio_path_e {
RF90_PATH_A = 0, /* Radio Path A */
RF90_PATH_B = 1, /* Radio Path B */
RF90_PATH_C = 2, /* Radio Path C */
@@ -54,23 +54,23 @@ void rtl8192_setBBreg(struct net_device *dev, u32 reg_addr,
u32 bitmask, u32 data);
u32 rtl8192_QueryBBReg(struct net_device *dev, u32 reg_addr, u32 bitmask);
void rtl8192_phy_SetRFReg(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath,
+ enum rf90_radio_path_e eRFPath,
u32 reg_addr, u32 bitmask, u32 data);
u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath,
+ enum rf90_radio_path_e eRFPath,
u32 reg_addr, u32 bitmask);
void rtl8192_phy_configmac(struct net_device *dev);
void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType);
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev,
enum hw90_block_e CheckBlock,
- enum RF90_RADIO_PATH_E eRFPath);
+ enum rf90_radio_path_e eRFPath);
void rtl8192_BBConfig(struct net_device *dev);
void rtl8192_phy_getTxPower(struct net_device *dev);
void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel);
void rtl8192_phy_RFConfig(struct net_device *dev);
void rtl8192_phy_updateInitGain(struct net_device *dev);
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
- enum RF90_RADIO_PATH_E eRFPath);
+ enum rf90_radio_path_e eRFPath);
u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel);
void rtl8192_SetBWMode(struct net_device *dev,
--
2.18.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
