There some macros that are not being used. Remove them.
Signed-off-by: Sergio Paracuellos <sergio.paracuel...@gmail.com>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 24 +-----------------------
1 file changed, 1 insertion(+), 23 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c
b/drivers/staging/mt7621-pci/pci-mt7621.c
index dfc83ed..adac455 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -84,7 +84,6 @@
#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
0x000C)
#define RALINK_PCI_BASE 0xBE140000
-#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
#define RT6855_PCIE0_OFFSET 0x2000
#define RT6855_PCIE1_OFFSET 0x3000
#define RT6855_PCIE2_OFFSET 0x4000
@@ -95,8 +94,6 @@
#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0034)
#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0038)
#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0050)
-#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0060)
-#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE0_OFFSET + 0x0064)
#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0010)
#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0018)
@@ -104,8 +101,6 @@
#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0034)
#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0038)
#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0050)
-#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0060)
-#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE1_OFFSET + 0x0064)
#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0010)
#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0018)
@@ -113,17 +108,10 @@
#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0034)
#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0038)
#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0050)
-#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0060)
-#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE +
RT6855_PCIE2_OFFSET + 0x0064)
#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000)
#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000)
-#define MV_WRITE(ofs, data) \
- *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data)
-#define MV_READ(ofs, data) \
- *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs)))
-
#define RALINK_PCI_MM_MAP_BASE 0x60000000
#define RALINK_PCI_IO_MAP_BASE 0x1e160000
@@ -141,28 +129,18 @@
else \
rt_sysc_m32(0, val, RALINK_RSTCTRL); \
} while (0)
+
#define RALINK_CLKCFG1 0x30
#define RALINK_RSTCTRL 0x34
#define RALINK_GPIOMODE 0x60
#define RALINK_PCIE_CLK_GEN 0x7c
#define RALINK_PCIE_CLK_GEN1 0x80
-#define PPLL_CFG1 0x9c
-#define PPLL_DRV 0xa0
-/* SYSC_REG_SYSTEM_CONFIG1 bits */
-#define RALINK_PCI_HOST_MODE_EN (1<<7)
-#define RALINK_PCIE_RC_MODE_EN (1<<8)
//RALINK_RSTCTRL bit
#define RALINK_PCIE_RST (1<<23)
#define RALINK_PCI_RST (1<<24)
//RALINK_CLKCFG1 bit
#define RALINK_PCI_CLK_EN (1<<19)
#define RALINK_PCIE_CLK_EN (1<<21)
-//RALINK_GPIOMODE bit
-#define PCI_SLOTx2 (1<<11)
-#define PCI_SLOTx1 (2<<11)
-//MTK PCIE PLL bit
-#define PDRV_SW_SET (1<<31)
-#define LC_CKDRVPD_ (1<<19)
#define MEMORY_BASE 0x0
static int pcie_link_status = 0;
--
2.7.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
