On 09/17/2018 04:47 AM, Phil Elwell wrote: > Hi Stefan, > > On 17/09/2018 12:39, Stefan Wahren wrote: >> Hi Phil, >> >> Am 17.09.2018 um 10:22 schrieb Phil Elwell: >>> Both sides of the VCHIQ communications mechanism need to agree on the cache >>> line size. Using an incorrect value can lead to data corruption, but having >>> the >>> two sides using different values is usually worse. >>> >>> In the absence of an obvious convenient run-time method to determine the >>> correct value in the ARCH=arm world, the downstream Raspberry Pi trees used >>> a >>> Device Tree property, written by the firmware, to configure the kernel >>> driver. >>> This method was vetoed during the upstreaming process, so a fixed value of >>> 32 >>> was used instead, and some corruptions ensued. This is take 2 at arriving at >>> the correct value. >>> >>> Add a new compatible string - "brcm,bcm2836-vchiq" - to indicate an SoC with >>> a 64-byte cache line. Document the new string in the binding, and use it on >>> the appropriate platforms. >>> >>> The final patch is a (seemingly cosmetic) correction of the Device Tree >>> "reg" >>> declaration for the device node, but it doubles as an indication to the >>> Raspberry Pi firmware that the kernel driver is running a recent kernel >>> driver >>> that chooses the correct value. As such it would help if the DT patches are >>> not merged before the driver patch. >>> >>> v3: Builds without errors, tested on multiple Raspberry Pi models. >>> v2: Replaced ARM-specific logic used to determine cache line size with >>> a new compatible string for BCM2836 and BCM2837. >>> >>> Phil Elwell (4): >>> staging/vc04_services: Use correct cache line size >>> dt-bindings: soc: Document "brcm,bcm2836-vchiq" >>> ARM: dts: bcm283x: Correct vchiq compatible string >>> ARM: dts: bcm283x: Correct mailbox register sizes >> >> since my pull requests are out, would it be okay to apply patch #1 for >> 4.20 and the DT stuff for 4.21 (with the assumption Rob is okay with >> these patches)? > > Patch 4 is the only one I'd like to be delayed, but delaying 2-4 is fine with > me.
Humm, did you mean you would like not to be delayed? In any case Stefan, you can send an additional pull request, and I will merge it and send a second pull request towards ARM SoC maintainers, that's not a problem. -- Florian _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel