Hi Steve,
On Thu, 2018-10-04 at 11:53 -0700, Steve Longerbeam wrote:
[...]
> int ipu_csi_init_interface(struct ipu_csi *csi,
> struct v4l2_mbus_config *mbus_cfg,
> - struct v4l2_mbus_framefmt *mbus_fmt)
> + struct v4l2_mbus_framefmt *infmt,
> + struct v4l2_mbus_framefmt *outfmt)
> {
[...]
> + std = V4L2_STD_UNKNOWN;
> + if (width == 720) {
> + switch (height) {
> + case 480:
> + std = V4L2_STD_NTSC;
> + break;
> + case 576:
> + std = V4L2_STD_PAL;
> + break;
> + default:
> + break;
> + }
> + }
> +
> + if (std == V4L2_STD_UNKNOWN) {
> dev_err(csi->ipu->dev,
[...]
> + "Unsupported interlaced video mode\n");
> + ret = -EINVAL;
> + goto out_unlock;
> }
[...]
> +
> + /* framelines for NTSC / PAL */
> + height = (std & V4L2_STD_525_60) ? 525 : 625;
I think this is a bit convoluted. Instead of initializing std, then
possibly changing it, and then comparing to the inital value, and then
checking it again to determine the new height, why not just:
if (width == 720 && height == 480) {
std = V4L2_STD_NTSC;
height = 525;
} else if (width == 720 && height == 576) {
std = V4L2_STD_PAL;
height = 625;
} else {
dev_err(csi->ipu->dev,
"Unsupported interlaced video mode\n");
ret = -EINVAL;
goto out_unlock;
}
?
> break;
> case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_DDR:
> case IPU_CSI_CLK_MODE_CCIR1120_PROGRESSIVE_SDR:
> @@ -476,9 +529,10 @@ int ipu_csi_init_interface(struct ipu_csi *csi,
> dev_dbg(csi->ipu->dev, "CSI_ACT_FRM_SIZE = 0x%08X\n",
> ipu_csi_read(csi, CSI_ACT_FRM_SIZE));
>
> +out_unlock:
> spin_unlock_irqrestore(&csi->lock, flags);
>
> - return 0;
> + return ret;
> }
> EXPORT_SYMBOL_GPL(ipu_csi_init_interface);
>
> diff --git a/drivers/staging/media/imx/imx-media-csi.c
> b/drivers/staging/media/imx/imx-media-csi.c
> index 4acdd7ae612b..ad66f007d395 100644
> --- a/drivers/staging/media/imx/imx-media-csi.c
> +++ b/drivers/staging/media/imx/imx-media-csi.c
> @@ -666,7 +666,6 @@ static int csi_setup(struct csi_priv *priv)
> struct v4l2_mbus_framefmt *infmt, *outfmt;
> const struct imx_media_pixfmt *incc;
> struct v4l2_mbus_config mbus_cfg;
> - struct v4l2_mbus_framefmt if_fmt;
> struct v4l2_rect crop;
>
> infmt = &priv->format_mbus[CSI_SINK_PAD];
> @@ -679,22 +678,14 @@ static int csi_setup(struct csi_priv *priv)
> priv->upstream_ep.bus.parallel.flags :
> priv->upstream_ep.bus.mipi_csi2.flags;
>
> - /*
> - * we need to pass input frame to CSI interface, but
> - * with translated field type from output format
> - */
> - if_fmt = *infmt;
> - if_fmt.field = outfmt->field;
> crop = priv->crop;
>
> /*
> * if cycles is set, we need to handle this over multiple cycles as
> * generic/bayer data
> */
> - if (is_parallel_bus(&priv->upstream_ep) && incc->cycles) {
> - if_fmt.width *= incc->cycles;
If the input format width passed to ipu_csi_init_interface is not
multiplied by the number of cycles per pixel anymore, width in the
CSI_SENS_FRM_SIZE register will be set to the unmultiplied value from
infmt.
This breaks 779680e2e793 ("media: imx: add support for RGB565_2X8 on
parallel bus").
> + if (is_parallel_bus(&priv->upstream_ep) && incc->cycles)
> crop.width *= incc->cycles;
> - }
>
> ipu_csi_set_window(priv->csi, &crop);
>
> @@ -702,7 +693,7 @@ static int csi_setup(struct csi_priv *priv)
> priv->crop.width == 2 * priv->compose.width,
> priv->crop.height == 2 * priv->compose.height);
>
> - ipu_csi_init_interface(priv->csi, &mbus_cfg, &if_fmt);
> + ipu_csi_init_interface(priv->csi, &mbus_cfg, infmt, outfmt);
regards
Philipp
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
