Driver probe function is a mess and shall be refactored a lot. At first
make use of assert and deassert control factoring out a new function
called 'mt7621_pcie_enable_port'.
Signed-off-by: Sergio Paracuellos <sergio.paracuel...@gmail.com>
---
drivers/staging/mt7621-pci/pci-mt7621.c | 88 +++++++++++++++------------------
1 file changed, 41 insertions(+), 47 deletions(-)
diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c
b/drivers/staging/mt7621-pci/pci-mt7621.c
index 04e82c3..9be5ca1 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -480,6 +480,39 @@ static int mt7621_pcie_parse_dt(struct mt7621_pcie *pcie)
return 0;
}
+static int mt7621_pcie_enable_port(struct mt7621_pcie_port *port)
+{
+ struct mt7621_pcie *pcie = port->pcie;
+ struct device *dev = pcie->dev;
+ u32 slot = port->slot;
+ u32 val = 0;
+ int err;
+
+ err = clk_prepare_enable(port->pcie_clk);
+ if (err) {
+ dev_err(dev, "failed to enable pcie%d clock\n", slot);
+ return err;
+ }
+
+ reset_control_assert(port->pcie_rst);
+ reset_control_deassert(port->pcie_rst);
+
+ if ((pcie_port_read(port, RALINK_PCI_STATUS) & 0x1) == 0) {
+ dev_err(dev, "pcie%d no card, disable it (RST & CLK)\n", slot);
+ reset_control_assert(port->pcie_rst);
+ rt_sysc_m32(BIT(24 + slot), 0, RALINK_CLKCFG1);
+ pcie_link_status &= ~(1 << slot);
+ } else {
+ pcie_link_status |= BIT(slot);
+ val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
+ /* enable pcie interrupt */
+ val |= BIT(20 + slot);
+ pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
+ }
+
+ return 0;
+}
+
static int mt7621_pcie_request_resources(struct mt7621_pcie *pcie,
struct list_head *res)
{
@@ -518,6 +551,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct mt7621_pcie *pcie;
struct pci_host_bridge *bridge;
+ struct mt7621_pcie_port *port, *tmp;
int err;
u32 val = 0;
LIST_HEAD(res);
@@ -546,12 +580,6 @@ static int mt7621_pci_probe(struct platform_device *pdev)
ioport_resource.start = 0;
ioport_resource.end = ~0UL; /* no limit */
- val = RALINK_PCIE0_RST;
- val |= RALINK_PCIE1_RST;
- val |= RALINK_PCIE2_RST;
-
- ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST |
RALINK_PCIE2_RST);
-
*(unsigned int *)(0xbe000060) &= ~(0x3 << 10 | 0x3 << 3);
*(unsigned int *)(0xbe000060) |= BIT(10) | BIT(3);
mdelay(100);
@@ -561,11 +589,13 @@ static int mt7621_pci_probe(struct platform_device *pdev)
mdelay(100);
- val = RALINK_PCIE0_RST;
- val |= RALINK_PCIE1_RST;
- val |= RALINK_PCIE2_RST;
-
- DEASSERT_SYSRST_PCIE(val);
+ list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
+ err = mt7621_pcie_enable_port(port);
+ if (err) {
+ dev_err(dev, "enabling port %d failed\n", port->slot);
+ list_del(&port->list);
+ }
+ }
if ((*(unsigned int *)(0xbe00000c) & 0xFFFF) == 0x0101) // MT7621 E2
bypass_pipe_rst(pcie);
@@ -591,42 +621,6 @@ static int mt7621_pci_probe(struct platform_device *pdev)
*(unsigned int *)(0xbe000620) |= BIT(19) | BIT(8) | BIT(7);
// set DATA
mdelay(1000);
- if ((pcie_read(pcie, RT6855_PCIE0_OFFSET + RALINK_PCI_STATUS) & 0x1) ==
0) {
- printk("PCIE0 no card, disable it(RST&CLK)\n");
- ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
- rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1);
- pcie_link_status &= ~(BIT(0));
- } else {
- pcie_link_status |= BIT(0);
- val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
- val |= BIT(20); // enable pcie1 interrupt
- pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
- }
-
- if ((pcie_read(pcie, RT6855_PCIE1_OFFSET + RALINK_PCI_STATUS) & 0x1) ==
0) {
- printk("PCIE1 no card, disable it(RST&CLK)\n");
- ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
- rt_sysc_m32(RALINK_PCIE1_CLK_EN, 0, RALINK_CLKCFG1);
- pcie_link_status &= ~(BIT(1));
- } else {
- pcie_link_status |= BIT(1);
- val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
- val |= BIT(21); // enable pcie1 interrupt
- pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
- }
-
- if ((pcie_read(pcie, RT6855_PCIE2_OFFSET + RALINK_PCI_STATUS) & 0x1) ==
0) {
- printk("PCIE2 no card, disable it(RST&CLK)\n");
- ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
- rt_sysc_m32(RALINK_PCIE2_CLK_EN, 0, RALINK_CLKCFG1);
- pcie_link_status &= ~(BIT(2));
- } else {
- pcie_link_status |= BIT(2);
- val = pcie_read(pcie, RALINK_PCI_PCIMSK_ADDR);
- val |= BIT(22); // enable pcie2 interrupt
- pcie_write(pcie, val, RALINK_PCI_PCIMSK_ADDR);
- }
-
if (pcie_link_status == 0)
return 0;
--
2.7.4
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
