On Sun, Dec 16, 2018 at 10:49:52AM +0100, Sergio Paracuellos wrote:
> In this mode the switch device and the internal phys will be managed via
> I2C interface.
>
> Signed-off-by: Sergio Paracuellos <sergio.paracuel...@gmail.com>
> ---
> Changes v2:
> - Use dev->txbuf as transmition buffer which is allocated using
> kernel allocators avoiding some possible DMA issues using the
> stack.
> drivers/net/dsa/microchip/Kconfig | 6 +
> drivers/net/dsa/microchip/Makefile | 1 +
> drivers/net/dsa/microchip/ksz9477_i2c.c | 269 ++++++++++++++++++++++++
> 3 files changed, 276 insertions(+)
> create mode 100644 drivers/net/dsa/microchip/ksz9477_i2c.c
>
> diff --git a/drivers/net/dsa/microchip/Kconfig
> b/drivers/net/dsa/microchip/Kconfig
> index a8caf9249d50..162fec43d204 100644
> --- a/drivers/net/dsa/microchip/Kconfig
> +++ b/drivers/net/dsa/microchip/Kconfig
> @@ -14,3 +14,9 @@ config NET_DSA_MICROCHIP_KSZ9477_SPI
> depends on NET_DSA_MICROCHIP_KSZ9477 && SPI
> help
> Select to enable support for registering switches configured through
> SPI.
> +
> +config NET_DSA_MICROCHIP_KSZ9477_I2C
> + tristate "KSZ series I2C connected switch driver"
> + depends on NET_DSA_MICROCHIP_KSZ9477 && I2C
> + help
> + Select to enable support for registering switches configured through
> I2C.
> diff --git a/drivers/net/dsa/microchip/Makefile
> b/drivers/net/dsa/microchip/Makefile
> index 3142c18b8f57..eb9b768face2 100644
> --- a/drivers/net/dsa/microchip/Makefile
> +++ b/drivers/net/dsa/microchip/Makefile
> @@ -1,3 +1,4 @@
> obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_common.o
> obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477) += ksz9477.o
> obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI) += ksz9477_spi.o
> +obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C) += ksz9477_i2c.o
> diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c
> b/drivers/net/dsa/microchip/ksz9477_i2c.c
> new file mode 100644
> index 000000000000..3c9cba6e254b
> --- /dev/null
> +++ b/drivers/net/dsa/microchip/ksz9477_i2c.c
> @@ -0,0 +1,269 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Microchip KSZ series register access through I2C
> + *
> + * Author: Sergio Paracuellos <sergio.paracuel...@gmail.com>
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include "ksz_priv.h"
> +
> +/* Enough to read all switch port registers. */
> +#define I2C_TX_BUF_LEN 0x100
> +
> +/**
> + * ksz_i2c_read_reg - issue read register command
> + * @client: i2c client structure
> + * @reg: The register address.
> + * @val: The buffer to return the result into.
> + * @len: The length of data expected.
> + *
> + * This is the low level read call that issues the necessary i2c message(s)
> + * to read data from the register specified in @reg.
> + */
> +static int ksz_i2c_read_reg(struct i2c_client *client, u32 reg, u8 *val,
> + unsigned int len)
> +{
> + struct i2c_adapter *adapter = client->adapter;
> + struct i2c_msg msg[2];
> + int ret;
> +
> + msg[0].addr = client->addr;
> + msg[0].flags = 0;
> + msg[0].len = 2;
> + msg[0].buf = val;
> +
> + msg[1].addr = client->addr;
> + msg[1].flags = I2C_M_RD;
> + msg[1].len = len;
> + msg[1].buf = val;
> +
> + ret = i2c_transfer(adapter, msg, 2);
> + return (ret != 2) ? -EREMOTEIO : 0;
> +}
> +
> +static int ksz_i2c_read(struct ksz_device *dev, u32 reg, u8 *data,
> + unsigned int len)
> +{
> + struct i2c_client *client = dev->priv;
> + int ret;
> +
> + len = (len > I2C_TX_BUF_LEN) ? I2C_TX_BUF_LEN : len;
> + dev->txbuf[0] = (u8)(reg >> 8);
> + dev->txbuf[1] = (u8)reg;
> +
> + ret = ksz_i2c_read_reg(client, reg, dev->txbuf, len);
> + if (!ret)
> + memcpy(data, dev->txbuf, len);
> +
> + return ret;
> +}
> +
> +static int ksz_i2c_read8(struct ksz_device *dev, u32 reg, u8 *val)
> +{
> + return ksz_i2c_read(dev, reg, val, 1);
> +}
> +
> +static int ksz_i2c_read16(struct ksz_device *dev, u32 reg, u16 *val)
> +{
> + int ret = ksz_i2c_read(dev, reg, (u8 *)val, 2);
> +
> + if (!ret)
> + *val = be16_to_cpu(*val);
> +
> + return ret;
> +}
> +
> +static int ksz_i2c_read24(struct ksz_device *dev, u32 reg, u32 *val)
> +{
> + int ret;
> +
> + *val = 0;
> + ret = ksz_i2c_read(dev, reg, (u8 *)val, 3);
> +
> + if (!ret) {
> + *val = be32_to_cpu(*val);
> + /* convert to 24 bit */
> + *val >>= 8;
> + }
> +
> + return ret;
> +}
> +
> +static int ksz_i2c_read32(struct ksz_device *dev, u32 reg, u32 *val)
> +{
> + int ret = ksz_i2c_read(dev, reg, (u8 *)val, 4);
> +
> + if (!ret)
> + *val = be32_to_cpu(*val);
> +
> + return ret;
> +}
> +
> +/**
> + * ksz_i2c_write_reg - issue write register command
> + * @client: i2c client structure
> + * @reg: The register address.
> + * @val: value to write
> + * @len: The length of data
> + *
> + * This is the low level write call that issues the necessary i2c message(s)
> + * to write data to the register specified in @reg.
> + */
> +static int ksz_i2c_write_reg(struct i2c_client *client, u32 reg, u8 *val,
> + unsigned int len)
> +{
> + struct i2c_adapter *adapter = client->adapter;
> + struct i2c_msg msg;
> + int ret;
> +
> + msg.addr = client->addr;
> + msg.flags = 0;
> + msg.len = 2 + len;
> + msg.buf = val;
> +
> + ret = i2c_transfer(adapter, &msg, 1);
> + return (ret != 1) ? -EREMOTEIO : 0;
> +}
> +
> +static int ksz_i2c_write(struct ksz_device *dev, u32 reg, u8 *val,
> + unsigned int len)
> +{
> + struct i2c_client *client = dev->priv;
> + unsigned int cnt = len;
> + int i;
> +
> + len = (len > I2C_TX_BUF_LEN) ? I2C_TX_BUF_LEN : len;
> + dev->txbuf[0] = (u8)(reg >> 8);
> + dev->txbuf[1] = (u8)reg;
> + i = 2;
> +
> + do {
> + dev->txbuf[i++] = (u8)(*val >> (8 * (cnt - 1)));
> + cnt--;
> + } while (cnt);
> +
> + return ksz_i2c_write_reg(client, reg, dev->txbuf, len);
> +}
> +
> +static int ksz_i2c_write8(struct ksz_device *dev, u32 reg, u8 value)
> +{
> + return ksz_i2c_write(dev, reg, &value, 1);
> +}
> +
> +static int ksz_i2c_write16(struct ksz_device *dev, u32 reg, u16 value)
> +{
> + value = cpu_to_be16(value);
> + return ksz_i2c_write(dev, reg, (u8 *)&value, 2);
> +}
> +
> +static int ksz_i2c_write24(struct ksz_device *dev, u32 reg, u32 value)
> +{
> + /* make it to big endian 24bit from MSB */
> + value <<= 8;
> + value = cpu_to_be32(value);
> +
> + return ksz_i2c_write(dev, reg, (u8 *)&value, 3);
> +}
> +
> +static int ksz_i2c_write32(struct ksz_device *dev, u32 reg, u32 value)
> +{
> + value = cpu_to_be32(value);
> + return ksz_i2c_write(dev, reg, (u8 *)&value, 4);
> +}
> +
> +static int ksz_i2c_get(struct ksz_device *dev, u32 reg, void *data, size_t
> len)
> +{
> + return ksz_i2c_read(dev, reg, data, len);
> +}
> +
> +static int ksz_i2c_set(struct ksz_device *dev, u32 reg, void *data, size_t
> len)
> +{
> + return ksz_i2c_write(dev, reg, data, len);
> +}
> +
> +static const struct ksz_io_ops ksz_i2c_ops = {
> + .read8 = ksz_i2c_read8,
> + .read16 = ksz_i2c_read16,
> + .read24 = ksz_i2c_read24,
> + .read32 = ksz_i2c_read32,
> + .write8 = ksz_i2c_write8,
> + .write16 = ksz_i2c_write16,
> + .write24 = ksz_i2c_write24,
> + .write32 = ksz_i2c_write32,
> + .get = ksz_i2c_get,
> + .set = ksz_i2c_set,
> +};
> +
> +static int ksz_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct ksz_device *dev;
> + int ret;
> +
> + dev = ksz_switch_alloc(&client->dev, &ksz_i2c_ops, client);
> + if (!dev)
> + return -ENOMEM;
> +
> + if (client->dev.platform_data)
> + dev->pdata = client->dev.platform_data;
> +
> + dev->txbuf = devm_kzalloc(dev->dev, 2 + I2C_TX_BUF_LEN, GFP_KERNEL);
> + if (!dev->txbuf)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(client, dev);
> +
> + ret = ksz9477_switch_register(dev);
> + if (ret) {
> + dev_err(&client->dev, "registering switch (ret: %d)\n", ret);
> + return ret;
> + }
Dan's comments appear to apply to this version as well.
Andrew
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
