* Indented with tabs.
* Broke lines over 80 columns where possible.
* Removed braces from one-statement blocks.
* Tidied up some comments.
* Removed multiple blank lines.
Signed-off-by: Jeremy Sowden <jer...@azazel.net>
---
drivers/staging/kpc2000/kpc2000/core.c | 810 ++++++++++++++-----------
1 file changed, 445 insertions(+), 365 deletions(-)
diff --git a/drivers/staging/kpc2000/kpc2000/core.c
b/drivers/staging/kpc2000/kpc2000/core.c
index eb8bac62d33d..d4af5a643a7b 100644
--- a/drivers/staging/kpc2000/kpc2000/core.c
+++ b/drivers/staging/kpc2000/kpc2000/core.c
@@ -18,30 +18,52 @@
#include <linux/jiffies.h>
#include "pcie.h"
-
/*******************************************************
- * SysFS Attributes
- ******************************************************/
-static ssize_t show_attr(struct device *dev, struct device_attribute *attr,
char *buf)
+ * SysFS Attributes
+ ******************************************************/
+
+static ssize_t show_attr(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct kp2000_device *pcard;
-
- if (!pdev) return -ENXIO;
- pcard = pci_get_drvdata(pdev);
- if (!pcard) return -ENXIO;
-
- if (strcmp("ssid", attr->attr.name) == 0){ return scnprintf(buf,
PAGE_SIZE, "%016llx\n", pcard->ssid); } else
- if (strcmp("ddna", attr->attr.name) == 0){ return scnprintf(buf,
PAGE_SIZE, "%016llx\n", pcard->ddna); } else
- if (strcmp("card_id", attr->attr.name) == 0){ return scnprintf(buf,
PAGE_SIZE, "%08x\n", pcard->card_id); } else
- if (strcmp("hw_rev", attr->attr.name) == 0){ return scnprintf(buf,
PAGE_SIZE, "%08x\n", pcard->hardware_revision); } else
- if (strcmp("build", attr->attr.name) == 0){ return scnprintf(buf,
PAGE_SIZE, "%08x\n", pcard->build_version); } else
- if (strcmp("build_date", attr->attr.name) == 0){ return scnprintf(buf,
PAGE_SIZE, "%08x\n", pcard->build_datestamp); } else
- if (strcmp("build_time", attr->attr.name) == 0){ return scnprintf(buf,
PAGE_SIZE, "%08x\n", pcard->build_timestamp); } else
- { return -ENXIO; }
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct kp2000_device *pcard;
+
+ if (!pdev)
+ return -ENXIO;
+ pcard = pci_get_drvdata(pdev);
+ if (!pcard)
+ return -ENXIO;
+
+ if (strcmp("ssid", attr->attr.name) == 0)
+ return scnprintf(buf, PAGE_SIZE, "%016llx\n", pcard->ssid);
+
+ if (strcmp("ddna", attr->attr.name) == 0)
+ return scnprintf(buf, PAGE_SIZE, "%016llx\n", pcard->ddna);
+
+ if (strcmp("card_id", attr->attr.name) == 0)
+ return scnprintf(buf, PAGE_SIZE, "%08x\n", pcard->card_id);
+
+ if (strcmp("hw_rev", attr->attr.name) == 0)
+ return scnprintf(buf, PAGE_SIZE, "%08x\n",
+ pcard->hardware_revision);
+
+ if (strcmp("build", attr->attr.name) == 0)
+ return scnprintf(buf, PAGE_SIZE, "%08x\n",
+ pcard->build_version);
+
+ if (strcmp("build_date", attr->attr.name) == 0)
+ return scnprintf(buf, PAGE_SIZE, "%08x\n",
+ pcard->build_datestamp);
+
+ if (strcmp("build_time", attr->attr.name) == 0)
+ return scnprintf(buf, PAGE_SIZE, "%08x\n",
+ pcard->build_timestamp);
+
+ return -ENXIO;
}
-static ssize_t show_cpld_config_reg(struct device *dev, struct
device_attribute *attr, char *buf)
+static ssize_t show_cpld_config_reg(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct kp2000_device *pcard;
@@ -57,27 +79,33 @@ static ssize_t show_cpld_config_reg(struct device *dev,
struct device_attribute
val = readq(pcard->sysinfo_regs_base + REG_CPLD_CONFIG);
return scnprintf(buf, PAGE_SIZE, "%016llx\n", val);
}
-static ssize_t cpld_reconfigure(struct device *dev, struct device_attribute
*attr, const char *buf, size_t count)
+
+static ssize_t cpld_reconfigure(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct pci_dev *pdev = to_pci_dev(dev);
- long wr_val;
- struct kp2000_device *pcard;
- int rv;
-
- if (!pdev) return -ENXIO;
- pcard = pci_get_drvdata(pdev);
- if (!pcard) return -ENXIO;
-
- rv = kstrtol(buf, 0, &wr_val);
- if (rv < 0) return rv;
- if (wr_val > 7) return -EINVAL;
-
- wr_val = wr_val << 8;
- wr_val |= 0x1; // Set the "Configure Go" bit
- writeq(wr_val, pcard->sysinfo_regs_base + REG_CPLD_CONFIG);
- return count;
-}
+ struct pci_dev *pdev = to_pci_dev(dev);
+ long wr_val;
+ struct kp2000_device *pcard;
+ int rv;
+ if (!pdev)
+ return -ENXIO;
+ pcard = pci_get_drvdata(pdev);
+ if (!pcard)
+ return -ENXIO;
+
+ rv = kstrtol(buf, 0, &wr_val);
+ if (rv < 0)
+ return rv;
+ if (wr_val > 7)
+ return -EINVAL;
+
+ wr_val = wr_val << 8;
+ wr_val |= 0x1; // Set the "Configure Go" bit
+ writeq(wr_val, pcard->sysinfo_regs_base + REG_CPLD_CONFIG);
+ return count;
+}
DEVICE_ATTR(ssid, 0444, show_attr, NULL);
DEVICE_ATTR(ddna, 0444, show_attr, NULL);
@@ -89,349 +117,401 @@ DEVICE_ATTR(build_time, 0444, show_attr, NULL);
DEVICE_ATTR(cpld_reg, 0444, show_cpld_config_reg, NULL);
DEVICE_ATTR(cpld_reconfigure, 0220, NULL, cpld_reconfigure);
-static const struct attribute * kp_attr_list[] = {
- &dev_attr_ssid.attr,
- &dev_attr_ddna.attr,
- &dev_attr_card_id.attr,
- &dev_attr_hw_rev.attr,
- &dev_attr_build.attr,
- &dev_attr_build_date.attr,
- &dev_attr_build_time.attr,
- &dev_attr_cpld_reg.attr,
- &dev_attr_cpld_reconfigure.attr,
- NULL,
+static const struct attribute *kp_attr_list[] = {
+ &dev_attr_ssid.attr,
+ &dev_attr_ddna.attr,
+ &dev_attr_card_id.attr,
+ &dev_attr_hw_rev.attr,
+ &dev_attr_build.attr,
+ &dev_attr_build_date.attr,
+ &dev_attr_build_time.attr,
+ &dev_attr_cpld_reg.attr,
+ &dev_attr_cpld_reconfigure.attr,
+ NULL,
};
-
/*******************************************************
- * Functions
- ******************************************************/
+ * Functions
+ ******************************************************/
static void wait_and_read_ssid(struct kp2000_device *pcard)
{
- u64 read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_SSID);
- unsigned long timeout;
-
- if (read_val & 0x8000000000000000){
- pcard->ssid = read_val;
- return;
- }
-
- timeout = jiffies + (HZ * 2);
- do {
- read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_SSID);
- if (read_val & 0x8000000000000000){
- pcard->ssid = read_val;
- return;
- }
- cpu_relax();
- //schedule();
- } while (time_before(jiffies, timeout));
-
- dev_notice(&pcard->pdev->dev, "SSID didn't show up!\n");
-
- #if 0
- // Timed out waiting for the SSID to show up, just use the DDNA instead?
- read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_DDNA);
- pcard->ssid = read_val;
- #else
- // Timed out waiting for the SSID to show up, stick all zeros in the value
- pcard->ssid = 0;
- #endif
+ u64 read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_SSID);
+ unsigned long timeout;
+
+ if (read_val & 0x8000000000000000) {
+ pcard->ssid = read_val;
+ return;
+ }
+
+ timeout = jiffies + (HZ * 2);
+ do {
+ read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_SSID);
+ if (read_val & 0x8000000000000000) {
+ pcard->ssid = read_val;
+ return;
+ }
+ cpu_relax();
+ //schedule();
+ } while (time_before(jiffies, timeout));
+
+ dev_notice(&pcard->pdev->dev, "SSID didn't show up!\n");
+
+#if 0
+ // Timed out waiting for the SSID to show up, just use the DDNA instead?
+ read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_DDNA);
+ pcard->ssid = read_val;
+#else
+ // Timed out waiting for the SSID to show up, stick all zeros in the
+ // value
+ pcard->ssid = 0;
+#endif
}
static int read_system_regs(struct kp2000_device *pcard)
{
- u64 read_val;
-
- read_val = readq(pcard->sysinfo_regs_base + REG_MAGIC_NUMBER);
- if (read_val != KP2000_MAGIC_VALUE){
- dev_err(&pcard->pdev->dev, "Invalid magic! Got: 0x%016llx Want:
0x%016lx\n", read_val, KP2000_MAGIC_VALUE);
- return -EILSEQ;
- }
-
- read_val = readq(pcard->sysinfo_regs_base + REG_CARD_ID_AND_BUILD);
- pcard->card_id = (read_val & 0xFFFFFFFF00000000) >> 32;
- pcard->build_version = (read_val & 0x00000000FFFFFFFF) >> 0;
-
- read_val = readq(pcard->sysinfo_regs_base + REG_DATE_AND_TIME_STAMPS);
- pcard->build_datestamp = (read_val & 0xFFFFFFFF00000000) >> 32;
- pcard->build_timestamp = (read_val & 0x00000000FFFFFFFF) >> 0;
-
- read_val = readq(pcard->sysinfo_regs_base + REG_CORE_TABLE_OFFSET);
- pcard->core_table_length = (read_val & 0xFFFFFFFF00000000) >> 32;
- pcard->core_table_offset = (read_val & 0x00000000FFFFFFFF) >> 0;
-
- wait_and_read_ssid(pcard);
-
- read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_HW_ID);
- pcard->core_table_rev = (read_val & 0x0000000000000F00) >> 8;
- pcard->hardware_revision = (read_val & 0x000000000000001F);
-
- read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_DDNA);
- pcard->ddna = read_val;
-
- dev_info(&pcard->pdev->dev, "system_regs: %08x %08x %08x %08x %02x %d %d
%016llx %016llx\n",
- pcard->card_id,
- pcard->build_version,
- pcard->build_datestamp,
- pcard->build_timestamp,
- pcard->hardware_revision,
- pcard->core_table_rev,
- pcard->core_table_length,
- pcard->ssid,
- pcard->ddna
- );
-
- if (pcard->core_table_rev > 1){
- dev_err(&pcard->pdev->dev, "core table entry revision is higher than
we can deal with, cannot continue with this card!\n");
- return 1;
- }
-
- return 0;
+ u64 read_val;
+
+ read_val = readq(pcard->sysinfo_regs_base + REG_MAGIC_NUMBER);
+ if (read_val != KP2000_MAGIC_VALUE) {
+ dev_err(&pcard->pdev->dev,
+ "Invalid magic! Got: 0x%016llx Want: 0x%016lx\n",
+ read_val, KP2000_MAGIC_VALUE);
+ return -EILSEQ;
+ }
+
+ read_val = readq(pcard->sysinfo_regs_base + REG_CARD_ID_AND_BUILD);
+ pcard->card_id = (read_val & 0xFFFFFFFF00000000) >> 32;
+ pcard->build_version = (read_val & 0x00000000FFFFFFFF) >> 0;
+
+ read_val = readq(pcard->sysinfo_regs_base + REG_DATE_AND_TIME_STAMPS);
+ pcard->build_datestamp = (read_val & 0xFFFFFFFF00000000) >> 32;
+ pcard->build_timestamp = (read_val & 0x00000000FFFFFFFF) >> 0;
+
+ read_val = readq(pcard->sysinfo_regs_base + REG_CORE_TABLE_OFFSET);
+ pcard->core_table_length = (read_val & 0xFFFFFFFF00000000) >> 32;
+ pcard->core_table_offset = (read_val & 0x00000000FFFFFFFF) >> 0;
+
+ wait_and_read_ssid(pcard);
+
+ read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_HW_ID);
+ pcard->core_table_rev = (read_val & 0x0000000000000F00) >> 8;
+ pcard->hardware_revision = (read_val & 0x000000000000001F);
+
+ read_val = readq(pcard->sysinfo_regs_base + REG_FPGA_DDNA);
+ pcard->ddna = read_val;
+
+ dev_info(&pcard->pdev->dev,
+ "system_regs: %08x %08x %08x %08x %02x %d %d %016llx
%016llx\n",
+ pcard->card_id,
+ pcard->build_version,
+ pcard->build_datestamp,
+ pcard->build_timestamp,
+ pcard->hardware_revision,
+ pcard->core_table_rev,
+ pcard->core_table_length,
+ pcard->ssid,
+ pcard->ddna);
+
+ if (pcard->core_table_rev > 1) {
+ dev_err(&pcard->pdev->dev,
+ "core table entry revision is higher than we can deal
with, cannot continue with this card!\n");
+ return 1;
+ }
+
+ return 0;
}
-irqreturn_t kp2000_irq_handler(int irq, void *dev_id)
+irqreturn_t kp2000_irq_handler(int irq, void *dev_id)
{
- struct kp2000_device *pcard = (struct kp2000_device*)dev_id;
- SetBackEndControl(pcard->dma_common_regs, KPC_DMA_CARD_IRQ_ENABLE |
KPC_DMA_CARD_USER_INTERRUPT_MODE | KPC_DMA_CARD_USER_INTERRUPT_ACTIVE);
- return IRQ_HANDLED;
+ struct kp2000_device *pcard = (struct kp2000_device *)dev_id;
+
+ SetBackEndControl(pcard->dma_common_regs,
+ KPC_DMA_CARD_IRQ_ENABLE |
+ KPC_DMA_CARD_USER_INTERRUPT_MODE |
+ KPC_DMA_CARD_USER_INTERRUPT_ACTIVE);
+ return IRQ_HANDLED;
}
-int kp2000_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+int kp2000_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
- int err = 0;
- struct kp2000_device *pcard;
- static int card_count = 1;
- int rv;
- unsigned long reg_bar_phys_addr;
- unsigned long reg_bar_phys_len;
- unsigned long dma_bar_phys_addr;
- unsigned long dma_bar_phys_len;
- u16 regval;
-
- dev_dbg(&pdev->dev, "kp2000_pcie_probe(pdev = [%p], id = [%p])\n", pdev,
id);
-
- //{ Step 1: Allocate a struct for the pcard
- pcard = kzalloc(sizeof(struct kp2000_device), GFP_KERNEL);
- if (NULL == pcard){
- dev_err(&pdev->dev, "probe: failed to allocate private card data\n");
- return -ENOMEM;
- }
- dev_dbg(&pdev->dev, "probe: allocated struct kp2000_device @ %p\n", pcard);
- //}
-
- //{ Step 2: Initialize trivial pcard elements
- pcard->card_num = card_count;
- card_count++;
- scnprintf(pcard->name, 16, "kpcard%d", pcard->card_num);
-
- mutex_init(&pcard->sem);
- lock_card(pcard);
-
- pcard->pdev = pdev;
- pci_set_drvdata(pdev, pcard);
- //}
-
- //{ Step 3: Enable PCI device
- err = pci_enable_device(pcard->pdev);
- if (err){
- dev_err(&pcard->pdev->dev, "probe: failed to enable PCIE2000 PCIe
device (%d)\n", err);
- goto out3;
- }
- //}
-
- //{ Step 4: Setup the Register BAR
- reg_bar_phys_addr = pci_resource_start(pcard->pdev, REG_BAR);
- reg_bar_phys_len = pci_resource_len(pcard->pdev, REG_BAR);
-
- pcard->regs_bar_base = ioremap_nocache(reg_bar_phys_addr, PAGE_SIZE);
- if (NULL == pcard->regs_bar_base){
- dev_err(&pcard->pdev->dev, "probe: REG_BAR could not remap memory to
virtual space\n");
- err = -ENODEV;
- goto out4;
- }
- dev_dbg(&pcard->pdev->dev, "probe: REG_BAR virt hardware address start
[%p]\n", pcard->regs_bar_base);
-
- err = pci_request_region(pcard->pdev, REG_BAR, KP_DRIVER_NAME_KP2000);
- if (err){
- iounmap(pcard->regs_bar_base);
- dev_err(&pcard->pdev->dev, "probe: failed to acquire PCI region
(%d)\n", err);
- err = -ENODEV;
- goto out4;
- }
-
- pcard->regs_base_resource.start = reg_bar_phys_addr;
- pcard->regs_base_resource.end = reg_bar_phys_addr + reg_bar_phys_len - 1;
- pcard->regs_base_resource.flags = IORESOURCE_MEM;
- //}
-
- //{ Step 5: Setup the DMA BAR
- dma_bar_phys_addr = pci_resource_start(pcard->pdev, DMA_BAR);
- dma_bar_phys_len = pci_resource_len(pcard->pdev, DMA_BAR);
-
- pcard->dma_bar_base = ioremap_nocache(dma_bar_phys_addr, dma_bar_phys_len);
- if (NULL == pcard->dma_bar_base){
- dev_err(&pcard->pdev->dev, "probe: DMA_BAR could not remap memory to
virtual space\n");
- err = -ENODEV;
- goto out5;
- }
- dev_dbg(&pcard->pdev->dev, "probe: DMA_BAR virt hardware address start
[%p]\n", pcard->dma_bar_base);
-
- pcard->dma_common_regs = pcard->dma_bar_base + KPC_DMA_COMMON_OFFSET;
-
- err = pci_request_region(pcard->pdev, DMA_BAR, "kp2000_pcie");
- if (err){
- iounmap(pcard->dma_bar_base);
- dev_err(&pcard->pdev->dev, "probe: failed to acquire PCI region
(%d)\n", err);
- err = -ENODEV;
- goto out5;
- }
-
- pcard->dma_base_resource.start = dma_bar_phys_addr;
- pcard->dma_base_resource.end = dma_bar_phys_addr + dma_bar_phys_len - 1;
- pcard->dma_base_resource.flags = IORESOURCE_MEM;
- //}
-
- //{ Step 6: System Regs
- pcard->sysinfo_regs_base = pcard->regs_bar_base;
- err = read_system_regs(pcard);
- if (err)
- goto out6;
-
- // Disable all "user" interrupts because they're not used yet.
- writeq(0xFFFFFFFFFFFFFFFF, pcard->sysinfo_regs_base + REG_INTERRUPT_MASK);
- //}
-
- //{ Step 7: Configure PCI thingies
- // let the card master PCIe
- pci_set_master(pcard->pdev);
- // enable IO and mem if not already done
- pci_read_config_word(pcard->pdev, PCI_COMMAND, ®val);
- regval |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
- pci_write_config_word(pcard->pdev, PCI_COMMAND, regval);
-
- // Clear relaxed ordering bit
- pcie_capability_clear_and_set_word(pcard->pdev, PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_RELAX_EN, 0);
-
- // Set Max_Payload_Size and Max_Read_Request_Size
- regval = (0x0) << 5; // Max_Payload_Size = 128 B
- pcie_capability_clear_and_set_word(pcard->pdev, PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_PAYLOAD, regval);
- regval = (0x0) << 12; // Max_Read_Request_Size = 128 B
- pcie_capability_clear_and_set_word(pcard->pdev, PCI_EXP_DEVCTL,
PCI_EXP_DEVCTL_READRQ, regval);
-
- // Enable error reporting for: Correctable Errors, Non-Fatal Errors, Fatal
Errors, Unsupported Requests
- pcie_capability_clear_and_set_word(pcard->pdev, PCI_EXP_DEVCTL, 0,
PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | PCI_EXP_DEVCTL_FERE |
PCI_EXP_DEVCTL_URRE);
-
- err = dma_set_mask(PCARD_TO_DEV(pcard), DMA_BIT_MASK(64));
- if (err){
- dev_err(&pcard->pdev->dev, "CANNOT use DMA mask %0llx\n",
DMA_BIT_MASK(64));
- goto out7;
- }
- dev_dbg(&pcard->pdev->dev, "Using DMA mask %0llx\n",
dma_get_mask(PCARD_TO_DEV(pcard)));
- //}
-
- //{ Step 8: Configure IRQs
- err = pci_enable_msi(pcard->pdev);
- if (err < 0)
- goto out8a;
-
- rv = request_irq(pcard->pdev->irq, kp2000_irq_handler, IRQF_SHARED,
pcard->name, pcard);
- if (rv){
- dev_err(&pcard->pdev->dev, "kp2000_pcie_probe: failed to request_irq:
%d\n", rv);
- goto out8b;
- }
- //}
-
- //{ Step 9: Setup sysfs attributes
- err = sysfs_create_files(&(pdev->dev.kobj), kp_attr_list);
- if (err){
- dev_err(&pdev->dev, "Failed to add sysfs files: %d\n", err);
- goto out9;
- }
- //}
-
- //{ Step 10: Setup misc device
- pcard->miscdev.minor = MISC_DYNAMIC_MINOR;
- pcard->miscdev.fops = &kp2000_fops;
- pcard->miscdev.parent = &pcard->pdev->dev;
- pcard->miscdev.name = pcard->name;
-
- err = misc_register(&pcard->miscdev);
- if (err){
- dev_err(&pcard->pdev->dev, "kp2000_pcie_probe: misc_register failed:
%d\n", err);
- goto out10;
- }
- //}
-
- //{ Step 11: Probe cores
- err = kp2000_probe_cores(pcard);
- if (err)
- goto out11;
- //}
-
- //{ Step 12: Enable IRQs in HW
- SetBackEndControl(pcard->dma_common_regs, KPC_DMA_CARD_IRQ_ENABLE |
KPC_DMA_CARD_USER_INTERRUPT_MODE);
- //}
-
- dev_dbg(&pcard->pdev->dev, "kp2000_pcie_probe() complete!\n");
- unlock_card(pcard);
- return 0;
-
- out11:
- misc_deregister(&pcard->miscdev);
- out10:
- sysfs_remove_files(&(pdev->dev.kobj), kp_attr_list);
- out9:
- free_irq(pcard->pdev->irq, pcard);
- out8b:
- pci_disable_msi(pcard->pdev);
- out8a:
- out7:
- out6:
- iounmap(pcard->dma_bar_base);
- pci_release_region(pdev, DMA_BAR);
- pcard->dma_bar_base = NULL;
- out5:
- iounmap(pcard->regs_bar_base);
- pci_release_region(pdev, REG_BAR);
- pcard->regs_bar_base = NULL;
- out4:
- pci_disable_device(pcard->pdev);
- out3:
- unlock_card(pcard);
- kfree(pcard);
- return err;
+ int err = 0;
+ struct kp2000_device *pcard;
+ static int card_count = 1;
+ int rv;
+ unsigned long reg_bar_phys_addr;
+ unsigned long reg_bar_phys_len;
+ unsigned long dma_bar_phys_addr;
+ unsigned long dma_bar_phys_len;
+ u16 regval;
+
+ dev_dbg(&pdev->dev, "kp2000_pcie_probe(pdev = [%p], id = [%p])\n",
+ pdev, id);
+
+ /*
+ * Step 1: Allocate a struct for the pcard
+ */
+ pcard = kzalloc(sizeof(struct kp2000_device), GFP_KERNEL);
+ if (NULL == pcard) {
+ dev_err(&pdev->dev,
+ "probe: failed to allocate private card data\n");
+ return -ENOMEM;
+ }
+ dev_dbg(&pdev->dev, "probe: allocated struct kp2000_device @ %p\n",
+ pcard);
+
+ /*
+ * Step 2: Initialize trivial pcard elements
+ */
+ pcard->card_num = card_count;
+ card_count++;
+ scnprintf(pcard->name, 16, "kpcard%d", pcard->card_num);
+
+ mutex_init(&pcard->sem);
+ lock_card(pcard);
+
+ pcard->pdev = pdev;
+ pci_set_drvdata(pdev, pcard);
+
+ /*
+ * Step 3: Enable PCI device
+ */
+ err = pci_enable_device(pcard->pdev);
+ if (err) {
+ dev_err(&pcard->pdev->dev,
+ "probe: failed to enable PCIE2000 PCIe device (%d)\n",
+ err);
+ goto out3;
+ }
+
+ /*
+ * Step 4: Setup the Register BAR
+ */
+ reg_bar_phys_addr = pci_resource_start(pcard->pdev, REG_BAR);
+ reg_bar_phys_len = pci_resource_len(pcard->pdev, REG_BAR);
+
+ pcard->regs_bar_base = ioremap_nocache(reg_bar_phys_addr, PAGE_SIZE);
+ if (NULL == pcard->regs_bar_base) {
+ dev_err(&pcard->pdev->dev,
+ "probe: REG_BAR could not remap memory to virtual
space\n");
+ err = -ENODEV;
+ goto out4;
+ }
+ dev_dbg(&pcard->pdev->dev,
+ "probe: REG_BAR virt hardware address start [%p]\n",
+ pcard->regs_bar_base);
+
+ err = pci_request_region(pcard->pdev, REG_BAR, KP_DRIVER_NAME_KP2000);
+ if (err) {
+ iounmap(pcard->regs_bar_base);
+ dev_err(&pcard->pdev->dev,
+ "probe: failed to acquire PCI region (%d)\n",
+ err);
+ err = -ENODEV;
+ goto out4;
+ }
+
+ pcard->regs_base_resource.start = reg_bar_phys_addr;
+ pcard->regs_base_resource.end = reg_bar_phys_addr +
+ reg_bar_phys_len - 1;
+ pcard->regs_base_resource.flags = IORESOURCE_MEM;
+
+ /*
+ * Step 5: Setup the DMA BAR
+ */
+ dma_bar_phys_addr = pci_resource_start(pcard->pdev, DMA_BAR);
+ dma_bar_phys_len = pci_resource_len(pcard->pdev, DMA_BAR);
+
+ pcard->dma_bar_base = ioremap_nocache(dma_bar_phys_addr,
+ dma_bar_phys_len);
+ if (NULL == pcard->dma_bar_base) {
+ dev_err(&pcard->pdev->dev,
+ "probe: DMA_BAR could not remap memory to virtual
space\n");
+ err = -ENODEV;
+ goto out5;
+ }
+ dev_dbg(&pcard->pdev->dev,
+ "probe: DMA_BAR virt hardware address start [%p]\n",
+ pcard->dma_bar_base);
+
+ pcard->dma_common_regs = pcard->dma_bar_base + KPC_DMA_COMMON_OFFSET;
+
+ err = pci_request_region(pcard->pdev, DMA_BAR, "kp2000_pcie");
+ if (err) {
+ iounmap(pcard->dma_bar_base);
+ dev_err(&pcard->pdev->dev,
+ "probe: failed to acquire PCI region (%d)\n", err);
+ err = -ENODEV;
+ goto out5;
+ }
+
+ pcard->dma_base_resource.start = dma_bar_phys_addr;
+ pcard->dma_base_resource.end = dma_bar_phys_addr +
+ dma_bar_phys_len - 1;
+ pcard->dma_base_resource.flags = IORESOURCE_MEM;
+
+ /*
+ * Step 6: System Regs
+ */
+ pcard->sysinfo_regs_base = pcard->regs_bar_base;
+ err = read_system_regs(pcard);
+ if (err)
+ goto out6;
+
+ // Disable all "user" interrupts because they're not used yet.
+ writeq(0xFFFFFFFFFFFFFFFF,
+ pcard->sysinfo_regs_base + REG_INTERRUPT_MASK);
+
+ /*
+ * Step 7: Configure PCI thingies
+ */
+ // let the card master PCIe
+ pci_set_master(pcard->pdev);
+ // enable IO and mem if not already done
+ pci_read_config_word(pcard->pdev, PCI_COMMAND, ®val);
+ regval |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+ pci_write_config_word(pcard->pdev, PCI_COMMAND, regval);
+
+ // Clear relaxed ordering bit
+ pcie_capability_clear_and_set_word(pcard->pdev, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_RELAX_EN, 0);
+
+ // Set Max_Payload_Size and Max_Read_Request_Size
+ regval = (0x0) << 5; // Max_Payload_Size = 128 B
+ pcie_capability_clear_and_set_word(pcard->pdev, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_PAYLOAD, regval);
+ regval = (0x0) << 12; // Max_Read_Request_Size = 128 B
+ pcie_capability_clear_and_set_word(pcard->pdev, PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_READRQ, regval);
+
+ // Enable error reporting for: Correctable Errors, Non-Fatal Errors,
+ // Fatal Errors, Unsupported Requests
+ pcie_capability_clear_and_set_word(pcard->pdev, PCI_EXP_DEVCTL, 0,
+ PCI_EXP_DEVCTL_CERE |
+ PCI_EXP_DEVCTL_NFERE |
+ PCI_EXP_DEVCTL_FERE |
+ PCI_EXP_DEVCTL_URRE);
+
+ err = dma_set_mask(PCARD_TO_DEV(pcard), DMA_BIT_MASK(64));
+ if (err) {
+ dev_err(&pcard->pdev->dev,
+ "CANNOT use DMA mask %0llx\n", DMA_BIT_MASK(64));
+ goto out7;
+ }
+ dev_dbg(&pcard->pdev->dev,
+ "Using DMA mask %0llx\n", dma_get_mask(PCARD_TO_DEV(pcard)));
+
+ /*
+ * Step 8: Configure IRQs
+ */
+ err = pci_enable_msi(pcard->pdev);
+ if (err < 0)
+ goto out8a;
+
+ rv = request_irq(pcard->pdev->irq, kp2000_irq_handler, IRQF_SHARED,
+ pcard->name, pcard);
+ if (rv) {
+ dev_err(&pcard->pdev->dev,
+ "kp2000_pcie_probe: failed to request_irq: %d\n", rv);
+ goto out8b;
+ }
+
+ /*
+ * Step 9: Setup sysfs attributes
+ */
+ err = sysfs_create_files(&(pdev->dev.kobj), kp_attr_list);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to add sysfs files: %d\n", err);
+ goto out9;
+ }
+
+ /*
+ * Step 10: Setup misc device
+ */
+ pcard->miscdev.minor = MISC_DYNAMIC_MINOR;
+ pcard->miscdev.fops = &kp2000_fops;
+ pcard->miscdev.parent = &pcard->pdev->dev;
+ pcard->miscdev.name = pcard->name;
+
+ err = misc_register(&pcard->miscdev);
+ if (err) {
+ dev_err(&pcard->pdev->dev,
+ "kp2000_pcie_probe: misc_register failed: %d\n", err);
+ goto out10;
+ }
+
+ /*
+ * Step 11: Probe cores
+ */
+ err = kp2000_probe_cores(pcard);
+ if (err)
+ goto out11;
+
+ /*
+ * Step 12: Enable IRQs in HW
+ */
+ SetBackEndControl(pcard->dma_common_regs,
+ KPC_DMA_CARD_IRQ_ENABLE |
+ KPC_DMA_CARD_USER_INTERRUPT_MODE);
+
+ dev_dbg(&pcard->pdev->dev, "kp2000_pcie_probe() complete!\n");
+ unlock_card(pcard);
+ return 0;
+
+out11:
+ misc_deregister(&pcard->miscdev);
+out10:
+ sysfs_remove_files(&(pdev->dev.kobj), kp_attr_list);
+out9:
+ free_irq(pcard->pdev->irq, pcard);
+out8b:
+ pci_disable_msi(pcard->pdev);
+out8a:
+out7:
+out6:
+ iounmap(pcard->dma_bar_base);
+ pci_release_region(pdev, DMA_BAR);
+ pcard->dma_bar_base = NULL;
+out5:
+ iounmap(pcard->regs_bar_base);
+ pci_release_region(pdev, REG_BAR);
+ pcard->regs_bar_base = NULL;
+out4:
+ pci_disable_device(pcard->pdev);
+out3:
+ unlock_card(pcard);
+ kfree(pcard);
+ return err;
}
-
-void kp2000_pcie_remove(struct pci_dev *pdev)
+void kp2000_pcie_remove(struct pci_dev *pdev)
{
- struct kp2000_device *pcard = pci_get_drvdata(pdev);
-
- dev_dbg(&pdev->dev, "kp2000_pcie_remove(pdev=%p)\n", pdev);
-
- if (pcard == NULL) return;
-
- lock_card(pcard);
- kp2000_remove_cores(pcard);
- mfd_remove_devices(PCARD_TO_DEV(pcard));
- misc_deregister(&pcard->miscdev);
- sysfs_remove_files(&(pdev->dev.kobj), kp_attr_list);
- free_irq(pcard->pdev->irq, pcard);
- pci_disable_msi(pcard->pdev);
- if (pcard->dma_bar_base != NULL){
- iounmap(pcard->dma_bar_base);
- pci_release_region(pdev, DMA_BAR);
- pcard->dma_bar_base = NULL;
- }
- if (pcard->regs_bar_base != NULL){
- iounmap(pcard->regs_bar_base);
- pci_release_region(pdev, REG_BAR);
- pcard->regs_bar_base = NULL;
- }
- pci_disable_device(pcard->pdev);
- pci_set_drvdata(pdev, NULL);
- unlock_card(pcard);
- kfree(pcard);
+ struct kp2000_device *pcard = pci_get_drvdata(pdev);
+
+ dev_dbg(&pdev->dev, "kp2000_pcie_remove(pdev=%p)\n", pdev);
+
+ if (pcard == NULL)
+ return;
+
+ lock_card(pcard);
+ kp2000_remove_cores(pcard);
+ mfd_remove_devices(PCARD_TO_DEV(pcard));
+ misc_deregister(&pcard->miscdev);
+ sysfs_remove_files(&(pdev->dev.kobj), kp_attr_list);
+ free_irq(pcard->pdev->irq, pcard);
+ pci_disable_msi(pcard->pdev);
+ if (pcard->dma_bar_base != NULL) {
+ iounmap(pcard->dma_bar_base);
+ pci_release_region(pdev, DMA_BAR);
+ pcard->dma_bar_base = NULL;
+ }
+ if (pcard->regs_bar_base != NULL) {
+ iounmap(pcard->regs_bar_base);
+ pci_release_region(pdev, REG_BAR);
+ pcard->regs_bar_base = NULL;
+ }
+ pci_disable_device(pcard->pdev);
+ pci_set_drvdata(pdev, NULL);
+ unlock_card(pcard);
+ kfree(pcard);
}
--
2.20.1
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
