Hi Sergio,
On 29/5/19 6:08 pm, Sergio Paracuellos wrote:
[snip]
I have added gpio consumer stuff and reorder a bit the code to be more
similar to 4.20.
I attach the patch. I have not try it to compile it, because my normal
environment is in another
computer and I am in the middle of moving from my current house and
don't have access to it, sorry.
So, please try this and let's see what happens.
No problem, thanks for the patch.
Unfortunately always locks up on kernel boot:
...
mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
mt7621-pci 1e140000.pcie: Port 454043648 N_FTS = 0
mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
mt7621-pci 1e140000.pcie: Port 454043648 N_FTS = 1
mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
mt7621-pci 1e140000.pcie: Port 454043648 N_FTS = 2
mt7621-pci 1e140000.pcie: pcie0 no card, disable it (RST & CLK)
mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)
mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
That was original linux-5.1 patched with your attached patch.
I'll try and dig down into that further today and get some
feedback on where it is failing.
Regards
Greg
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
