Hi Dan,
hi Dave,
Am 25.06.19 um 09:55 schrieb Dan Carpenter:
> On Tue, Jun 25, 2019 at 12:13:15AM +0200, Stefan Wahren wrote:
>> The commit 52c4dfcead49 ("Staging: vc04_services: Cleanup in
>> ctrl_set_bitrate()") changed the return behavior of ctrl_set_bitrate().
>> This breaks probing of bcm2835-camera:
>>
>> bcm2835-v4l2: mmal_init: failed to set all camera controls: -3
>> Cleanup: Destroy video encoder
>> Cleanup: Destroy image encoder
>> Cleanup: Destroy video render
>> Cleanup: Destroy camera
>> bcm2835-v4l2: bcm2835_mmal_probe: mmal init failed: -3
>> bcm2835-camera: probe of bcm2835-camera failed with error -3
>>
>> So restore the old behavior and fix this issue.
>>
>> Fixes: 52c4dfcead49 ("Staging: vc04_services: Cleanup in ctrl_set_bitrate()")
>> Signed-off-by: Stefan Wahren <wahre...@gmx.net>
> I feel like this papers over the issue. It would be better to figure
> out why this is failing and fix it properly. -3 is -ESRCH and when I
> grep for ESRCH I only see it used in the ioctl so that can't be it.
>
> I think it must be -MMAL_MSG_STATUS_EINVAL actually, but it comes from
> the firmware or something so we can't grep for it.
yes this is a result from the VC4 firmware, there is nothing i can do
about it. Even the firmware has been fixed, the driver must be
compatible with older firmware version.
> Can we do some more digging to find out why it's failing or otherwise
> we could add a comment.
>
> /*
> * FIXME: port_parameter_set() sometimes fails with
> * -MMAL_MSG_STATUS_EINVAL and we don't know why so we're
> * ignoring those errors for now.
> *
> */
> return 0;
I will add a comment and a v4l2_dbg entry.
@Dave
I used a Raspberry Pi 3 with a V1.3 camera and get this with an
additional v4l2_dbg in ctrl_set_bitrate()
[ 1.472805] raspberrypi-firmware soc:firmware: Attached to firmware
from 2019-03-27 15:48
...
[ 7.441639] videodev: Linux video capture interface: v2.00
[ 7.511659] bcm2835_v4l2: module is from the staging directory, the
quality is unknown, you have been warned.
...
[ 8.162504] bcm2835-v4l2: Set fps range to 30000/1000 to 30000/1000
[ 8.163104] bcm2835-v4l2: Set fps range to 30000/1000 to 30000/1000
[ 8.163624] bcm2835-v4l2: Set fps range to 30000/1000 to 30000/1000
[ 8.164395] bcm2835-v4l2: mmal_ctrl:eecd7187 ctrl id:0x98091f ctrl
val:0 imagefx:0x0 color_effect:false u:0 v:0 ret 0(0)
[ 8.164493] bcm2835-v4l2: ctrl_set_colfx: After: mmal_ctrl:1ec18e37
ctrl id:0x98092a ctrl val:32896 ret 0(0)
[ 8.165413] bcm2835-v4l2: ctrl_set_bitrate: After: mmal_ctrl:b01a3b48
ctrl id:0x9909cf ctrl val:10000000 ret -3(-22)
[ 8.165872] bcm2835-v4l2: scene mode selected 0, was 0
[ 8.166249] bcm2835-v4l2: V4L2 device registered as video0 - stills
mode > 1280x720
[ 8.166596] bcm2835-v4l2: vid_cap - set up encode comp
[ 8.171208] bcm2835-v4l2: JPG - buf size now 786432 was 786432
[ 8.171220] bcm2835-v4l2: vid_cap - cur_buf.size set to 786432
[ 8.171228] bcm2835-v4l2: Set dev->capture.fmt 4745504A, 1024x768,
stride 0, size 786432
[ 8.171234] bcm2835-v4l2: Broadcom 2835 MMAL video capture ver 0.0.2
loaded.
Looks like the firmware dislike val:10000000
Any thoughts?
>
>
> regards,
> dan carpenter
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-ker...@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
