From: Adham Abozaeid <adham.aboza...@microchip.com>

Don't override powersave state with respect to the open interfaces and
let the firmware take care of when it's appropriate to do so

Signed-off-by: Adham Abozaeid <adham.aboza...@microchip.com>
---
 drivers/staging/wilc1000/wilc_hif.c               | 11 ++---------
 drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 15 +--------------
 drivers/staging/wilc1000/wilc_wfi_netdevice.h     |  1 -
 3 files changed, 3 insertions(+), 24 deletions(-)

diff --git a/drivers/staging/wilc1000/wilc_hif.c 
b/drivers/staging/wilc1000/wilc_hif.c
index 611f842d2836..16ff610c6a5b 100644
--- a/drivers/staging/wilc1000/wilc_hif.c
+++ b/drivers/staging/wilc1000/wilc_hif.c
@@ -679,8 +679,6 @@ static inline void host_int_parse_assoc_resp_info(struct 
wilc_vif *vif,
        if (mac_status == WILC_MAC_STATUS_CONNECTED &&
            conn_info->status == WLAN_STATUS_SUCCESS) {
                ether_addr_copy(hif_drv->assoc_bssid, conn_info->bssid);
-               wilc_set_power_mgmt(vif, 0, 0);
-
                hif_drv->hif_state = HOST_IF_CONNECTED;
        } else {
                hif_drv->hif_state = HOST_IF_IDLE;
@@ -704,14 +702,11 @@ static inline void host_int_handle_disconnect(struct 
wilc_vif *vif)
                handle_scan_done(vif, SCAN_EVENT_ABORTED);
        }
 
-       if (hif_drv->conn_info.conn_result) {
-               wilc_set_power_mgmt(vif, 0, 0);
-
+       if (hif_drv->conn_info.conn_result)
                hif_drv->conn_info.conn_result(CONN_DISCONN_EVENT_DISCONN_NOTIF,
                                               0, hif_drv->conn_info.arg);
-       } else {
+       else
                netdev_err(vif->ndev, "%s: conn_result is NULL\n", __func__);
-       }
 
        eth_zero_addr(hif_drv->assoc_bssid);
 
@@ -767,8 +762,6 @@ int wilc_disconnect(struct wilc_vif *vif)
        wid.val = (s8 *)&dummy_reason_code;
        wid.size = sizeof(char);
 
-       wilc_set_power_mgmt(vif, 0, 0);
-
        result = wilc_send_config_pkt(vif, WILC_SET_CFG, &wid, 1);
        if (result) {
                netdev_err(vif->ndev, "Failed to send disconnect\n");
diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c 
b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
index 6ac0fe58ceed..716c60d0f962 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c
@@ -1394,8 +1394,7 @@ static int set_power_mgmt(struct wiphy *wiphy, struct 
net_device *dev,
        if (!priv->hif_drv)
                return -EIO;
 
-       if (vif->wilc->enable_ps)
-               wilc_set_power_mgmt(vif, enabled, timeout);
+       wilc_set_power_mgmt(vif, enabled, timeout);
 
        return 0;
 }
@@ -1425,9 +1424,6 @@ static int change_virtual_intf(struct wiphy *wiphy, 
struct net_device *dev,
 
                memset(priv->assoc_stainfo.sta_associated_bss, 0,
                       WILC_MAX_NUM_STA * ETH_ALEN);
-
-               wl->enable_ps = true;
-               wilc_set_power_mgmt(vif, 1, 0);
                break;
 
        case NL80211_IFTYPE_P2P_CLIENT:
@@ -1438,12 +1434,9 @@ static int change_virtual_intf(struct wiphy *wiphy, 
struct net_device *dev,
                vif->iftype = WILC_CLIENT_MODE;
                wilc_set_operation_mode(vif, WILC_STATION_MODE);
 
-               wl->enable_ps = false;
-               wilc_set_power_mgmt(vif, 0, 0);
                break;
 
        case NL80211_IFTYPE_AP:
-               wl->enable_ps = false;
                dev->ieee80211_ptr->iftype = type;
                priv->wdev.iftype = type;
                vif->iftype = WILC_AP_MODE;
@@ -1452,7 +1445,6 @@ static int change_virtual_intf(struct wiphy *wiphy, 
struct net_device *dev,
                        wilc_set_wfi_drv_handler(vif, wilc_get_vif_idx(vif),
                                                 0, vif->idx);
                        wilc_set_operation_mode(vif, WILC_AP_MODE);
-                       wilc_set_power_mgmt(vif, 0, 0);
                }
                break;
 
@@ -1461,9 +1453,6 @@ static int change_virtual_intf(struct wiphy *wiphy, 
struct net_device *dev,
                dev->ieee80211_ptr->iftype = type;
                priv->wdev.iftype = type;
                vif->iftype = WILC_GO_MODE;
-
-               wl->enable_ps = false;
-               wilc_set_power_mgmt(vif, 0, 0);
                break;
 
        default:
@@ -1485,7 +1474,6 @@ static int start_ap(struct wiphy *wiphy, struct 
net_device *dev,
                netdev_err(dev, "Error in setting channel\n");
 
        wilc_wlan_set_bssid(dev, dev->dev_addr, WILC_AP_MODE);
-       wilc_set_power_mgmt(vif, 0, 0);
 
        return wilc_add_beacon(vif, settings->beacon_interval,
                                   settings->dtim_period, &settings->beacon);
@@ -1836,7 +1824,6 @@ int wilc_cfg80211_init(struct wilc **wilc, struct device 
*dev, int io_type,
        *wilc = wl;
        wl->io_type = io_type;
        wl->hif_func = ops;
-       wl->enable_ps = false;
        wl->chip_ps_state = WILC_CHIP_WAKEDUP;
        INIT_LIST_HEAD(&wl->txq_head.list);
        INIT_LIST_HEAD(&wl->rxq_head.list);
diff --git a/drivers/staging/wilc1000/wilc_wfi_netdevice.h 
b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
index 704e4d572695..7e7ce9471f67 100644
--- a/drivers/staging/wilc1000/wilc_wfi_netdevice.h
+++ b/drivers/staging/wilc1000/wilc_wfi_netdevice.h
@@ -261,7 +261,6 @@ struct wilc {
        struct device *dev;
        bool suspend_event;
 
-       bool enable_ps;
        int clients_count;
        struct workqueue_struct *hif_workqueue;
        enum chip_ps_states chip_ps_state;
-- 
2.17.1

_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

Reply via email to