Several blocks of code are guarded by #ifdef TO_DO_LIST. If this is
defined, compilation fails. No machinery exists to define this, and no
documenation on the in-progress feature exists. Since this code is dead,
let's delete it.
Signed-off-by: Stephen Brennan <step...@brennan.io>
---
Sorry, I know you're giving a keynote right now Greg :)
.../staging/rtl8192u/ieee80211/ieee80211.h | 2 -
.../staging/rtl8192u/ieee80211/ieee80211_tx.c | 21 ----
.../rtl8192u/ieee80211/rtl819x_HTProc.c | 4 -
.../rtl8192u/ieee80211/rtl819x_TSProc.c | 4 -
drivers/staging/rtl8192u/r8192U_core.c | 101 +-----------------
drivers/staging/rtl8192u/r819xU_phy.c | 59 ----------
6 files changed, 4 insertions(+), 187 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index daebbbd8f4dd..9576b647f6b1 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -1649,10 +1649,8 @@ struct ieee80211_device {
struct list_head Rx_TS_Pending_List;
struct list_head Rx_TS_Unused_List;
struct rx_ts_record RxTsRecord[TOTAL_TS_NUM];
-//#ifdef TO_DO_LIST
struct rx_reorder_entry RxReorderEntry[128];
struct list_head RxReorder_Unused_List;
-//#endif
// Qos related. Added by Annie, 2005-11-01.
// PSTA_QOS pStaQos;
u8 ForcedPriority; // Force
per-packet priority 1~7. (default: 0, not to force it.)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index e76bdedc8409..140e3cb66a2e 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -302,13 +302,6 @@ static void ieee80211_tx_query_agg_cap(struct
ieee80211_device *ieee,
if (is_multicast_ether_addr(hdr->addr1))
return;
//check packet and mode later
-#ifdef TO_DO_LIST
- if (pTcb->PacketLength >= 4096)
- return;
- // For RTL819X, if pairwisekey = wep/tkip, we don't aggrregation.
- if (!Adapter->HalFunc.GetNmodeSupportBySecCfgHandler(Adapter))
- return;
-#endif
if (!ieee->GetNmodeSupportBySecCfg(ieee->dev)) {
return;
}
@@ -509,20 +502,6 @@ static void ieee80211_query_protectionmode(struct
ieee80211_device *ieee,
static void ieee80211_txrate_selectmode(struct ieee80211_device *ieee,
struct cb_desc *tcb_desc)
{
-#ifdef TO_DO_LIST
- if (!IsDataFrame(pFrame)) {
- pTcb->bTxDisableRateFallBack = true;
- pTcb->bTxUseDriverAssingedRate = true;
- pTcb->RATRIndex = 7;
- return;
- }
-
- if (pMgntInfo->ForcedDataRate != 0) {
- pTcb->bTxDisableRateFallBack = true;
- pTcb->bTxUseDriverAssingedRate = true;
- return;
- }
-#endif
if (ieee->bTxDisableRateFallBack)
tcb_desc->bTxDisableRateFallBack = true;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index c73a8058cf87..dba3f2db9f48 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -93,10 +93,6 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
ieee->bTxDisableRateFallBack = 0;
ieee->bTxUseDriverAssingedRate = 0;
-#ifdef TO_DO_LIST
- // 8190 only. Assign duration operation mode to firmware
- pMgntInfo->bTxEnableFwCalcDur =
(BOOLEAN)pNdisCommon->bRegTxEnableFwCalcDur;
-#endif
/*
* 8190 only, Realtek proprietary aggregation mode
* Set MPDUDensity=2, 1: Set MPDUDensity=2(32k) for Realtek AP and
set MPDUDensity=0(8k) for others
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
index f4e5aa07421f..5cee1031a27c 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
@@ -180,14 +180,12 @@ void TSInitialize(struct ieee80211_device *ieee)
}
// Initialize unused Rx Reorder List.
INIT_LIST_HEAD(&ieee->RxReorder_Unused_List);
-//#ifdef TO_DO_LIST
for (count = 0; count < REORDER_ENTRY_NUM; count++) {
list_add_tail(&pRxReorderEntry->List,
&ieee->RxReorder_Unused_List);
if (count == (REORDER_ENTRY_NUM - 1))
break;
pRxReorderEntry = &ieee->RxReorderEntry[count + 1];
}
-//#endif
}
static void AdmitTS(struct ieee80211_device *ieee,
@@ -417,7 +415,6 @@ static void RemoveTsEntry(struct ieee80211_device *ieee,
struct ts_common_info *
TsInitDelBA(ieee, pTs, TxRxSelect);
if (TxRxSelect == RX_DIR) {
-//#ifdef TO_DO_LIST
struct rx_reorder_entry *pRxReorderEntry;
struct rx_ts_record *pRxTS = (struct rx_ts_record *)pTs;
if (timer_pending(&pRxTS->rx_pkt_pending_timer))
@@ -445,7 +442,6 @@ static void RemoveTsEntry(struct ieee80211_device *ieee,
struct ts_common_info *
spin_unlock_irqrestore(&(ieee->reorder_spinlock),
flags);
}
-//#endif
} else {
struct tx_ts_record *pTxTS = (struct tx_ts_record *)pTs;
del_timer_sync(&pTxTS->ts_add_ba_timer);
diff --git a/drivers/staging/rtl8192u/r8192U_core.c
b/drivers/staging/rtl8192u/r8192U_core.c
index 569d02240bf5..2821411878ce 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -2076,14 +2076,6 @@ static void rtl8192_SetWirelessMode(struct net_device
*dev, u8 wireless_mode)
wireless_mode = WIRELESS_MODE_B;
}
}
-#ifdef TO_DO_LIST
- /* TODO: this function doesn't work well at this time,
- * we should wait for FPGA
- */
- ActUpdateChannelAccessSetting(
- pAdapter, pHalData->CurrentWirelessMode,
- &pAdapter->MgntInfo.Info8185.ChannelAccessSetting);
-#endif
priv->ieee80211->mode = wireless_mode;
if (wireless_mode == WIRELESS_MODE_N_24G ||
@@ -2159,12 +2151,6 @@ static int rtl8192_init_priv_variable(struct net_device
*dev)
priv->ieee80211->InitialGainHandler = InitialGain819xUsb;
priv->card_type = USB;
-#ifdef TO_DO_LIST
- if (Adapter->bInHctTest) {
- pHalData->ShortRetryLimit = 7;
- pHalData->LongRetryLimit = 7;
- }
-#endif
priv->ShortRetryLimit = 0x30;
priv->LongRetryLimit = 0x30;
priv->EarlyRxThreshold = 7;
@@ -2180,34 +2166,6 @@ static int rtl8192_init_priv_variable(struct net_device
*dev)
* TRUE: SW provides them
*/
(false ? TCR_SAT : 0);
-#ifdef TO_DO_LIST
- if (Adapter->bInHctTest)
- pHalData->ReceiveConfig =
- pHalData->CSMethod |
- /* accept management/data */
- RCR_AMF | RCR_ADF |
- /* accept control frame for SW
- * AP needs PS-poll
- */
- RCR_ACF |
- /* accept BC/MC/UC */
- RCR_AB | RCR_AM | RCR_APM |
- /* accept ICV/CRC error
- * packet
- */
- RCR_AICV | RCR_ACRC32 |
- /* Max DMA Burst Size per Tx
- * DMA Burst, 7: unlimited.
- */
- ((u32)7 << RCR_MXDMA_OFFSET) |
- /* Rx FIFO Threshold,
- * 7: No Rx threshold.
- */
- (pHalData->EarlyRxThreshold << RCR_FIFO_OFFSET) |
- (pHalData->EarlyRxThreshold == 7 ? RCR_OnlyErlPkt : 0);
- else
-
-#endif
priv->ReceiveConfig =
/* accept management/data */
RCR_AMF | RCR_ADF |
@@ -2665,19 +2623,10 @@ static void rtl8192_hwconfig(struct net_device *dev)
regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
break;
case WIRELESS_MODE_AUTO:
-#ifdef TO_DO_LIST
- if (Adapter->bInHctTest) {
- regBwOpMode = BW_OPMODE_20MHZ;
- regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
- regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
- } else
-#endif
- {
- regBwOpMode = BW_OPMODE_20MHZ;
- regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG |
- RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
- regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
- }
+ regBwOpMode = BW_OPMODE_20MHZ;
+ regRATR = RATE_ALL_CCK | RATE_ALL_OFDM_AG |
+ RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+ regRRSR = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
break;
case WIRELESS_MODE_N_24G:
/* It support CCK rate by default. CCK rate will be filtered
@@ -2848,48 +2797,6 @@ static bool rtl8192_adapter_start(struct net_device *dev)
}
RT_TRACE(COMP_INIT, "%s():after firmware download\n", __func__);
-#ifdef TO_DO_LIST
- if (Adapter->ResetProgress == RESET_TYPE_NORESET) {
- if (pMgntInfo->RegRfOff) { /* User disable RF via registry. */
- RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD,
- ("InitializeAdapter819xUsb(): Turn off RF for
RegRfOff ----------\n"));
- MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW);
- /* Those actions will be discard in MgntActSet_RF_State
- * because of the same state
- */
- for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath;
eRFPath++)
- PHY_SetRFReg(Adapter,
- (enum rf90_radio_path_e)eRFPath,
- 0x4, 0xC00, 0x0);
- } else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) {
- /* H/W or S/W RF OFF before sleep. */
- RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD,
- ("InitializeAdapter819xUsb(): Turn off RF for
RfOffReason(%d) ----------\n",
- pMgntInfo->RfOffReason));
- MgntActSet_RF_State(Adapter,
- eRfOff,
- pMgntInfo->RfOffReason);
- } else {
- pHalData->eRFPowerState = eRfOn;
- pMgntInfo->RfOffReason = 0;
- RT_TRACE((COMP_INIT | COMP_RF), DBG_LOUD,
- ("InitializeAdapter819xUsb(): RF is on
----------\n"));
- }
- } else {
- if (pHalData->eRFPowerState == eRfOff) {
- MgntActSet_RF_State(Adapter,
- eRfOff,
- pMgntInfo->RfOffReason);
- /* Those actions will be discard in MgntActSet_RF_State
- * because of the same state
- */
- for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath;
eRFPath++)
- PHY_SetRFReg(Adapter,
- (enum rf90_radio_path_e)eRFPath,
- 0x4, 0xC00, 0x0);
- }
- }
-#endif
/* config RF. */
if (priv->ResetProgress == RESET_TYPE_NORESET) {
rtl8192_phy_RFConfig(dev);
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c
b/drivers/staging/rtl8192u/r819xU_phy.c
index 5f04afe53d69..c04d8eca0cfb 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -516,16 +516,6 @@ static void rtl8192_phyConfigBB(struct net_device *dev,
{
u32 i;
-#ifdef TO_DO_LIST
- u32 *rtl8192PhyRegArrayTable = NULL, *rtl8192AgcTabArrayTable = NULL;
-
- if (Adapter->bInHctTest) {
- PHY_REGArrayLen = PHY_REGArrayLengthDTM;
- AGCTAB_ArrayLen = AGCTAB_ArrayLengthDTM;
- Rtl8190PHY_REGArray_Table = Rtl819XPHY_REGArrayDTM;
- Rtl8190AGCTAB_Array_Table = Rtl819XAGCTAB_ArrayDTM;
- }
-#endif
if (ConfigType == BASEBAND_CONFIG_PHY_REG) {
for (i = 0; i < PHY_REG_1T2RArrayLength; i += 2) {
rtl8192_setBBreg(dev, Rtl8192UsbPHY_REG_1T2RArray[i],
@@ -1059,10 +1049,6 @@ static void rtl8192_SetTxPowerLevel(struct net_device
*dev, u8 channel)
switch (priv->rf_chip) {
case RF_8225:
-#ifdef TO_DO_LIST
- PHY_SetRF8225CckTxPower(Adapter, powerlevel);
- PHY_SetRF8225OfdmTxPower(Adapter, powerlevelOFDM24G);
-#endif
break;
case RF_8256:
@@ -1160,48 +1146,6 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
RT_TRACE(COMP_ERR, "Not support rf_chip(%x)\n", priv->rf_chip);
break;
}
-#ifdef TO_DO_LIST
- if (bResult) {
- /* Update current RF state variable. */
- pHalData->eRFPowerState = eRFPowerState;
- switch (pHalData->RFChipID) {
- case RF_8256:
- switch (pHalData->eRFPowerState) {
- case eRfOff:
- /* If Rf off reason is from IPS,
- * LED should blink with no link
- */
- if (pMgntInfo->RfOffReason == RF_CHANGE_BY_IPS)
-
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
- else
- /* Turn off LED if RF is not ON. */
-
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF);
- break;
-
- case eRfOn:
- /* Turn on RF we are still linked, which might
- * happen when we quickly turn off and on HW RF.
- */
- if (pMgntInfo->bMediaConnect)
-
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
- else
- /* Turn off LED if RF is not ON. */
-
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
- break;
-
- default:
- break;
- }
- break;
-
- default:
- RT_TRACE(COMP_RF, DBG_LOUD, "%s(): Unknown RF type\n",
- __func__);
- break;
- }
-
- }
-#endif
priv->SetRFPowerStateInProgress = false;
return bResult;
@@ -1628,9 +1572,6 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
/* <3> Set RF related register */
switch (priv->rf_chip) {
case RF_8225:
-#ifdef TO_DO_LIST
- PHY_SetRF8225Bandwidth(Adapter, pHalData->CurrentChannelBW);
-#endif
break;
case RF_8256:
--
2.22.0
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
