This patch fixes the file r8190_rtl8256.c to avoid the following
checkpatch.pl warnings:
CHECK: spaces preferred around that '<<' (ctx:VxV)
CHECK: spaces preferred around that '-' (ctx:VxV)
CHECK: Blank lines aren't necessary before a close brace '}'
CHECK: Please use a blank line after function/struct/union/enum
declarations
CHECK: No space is necessary after a cast
CHECK: Please don't use multiple blank lines
CHECK: Please don't use multiple blank lines
Signed-off-by: Sumera Priyadarsini <sylphrena...@gmail.com>
---
drivers/staging/rtl8192u/r8190_rtl8256.c | 38 +++++++++++-------------
1 file changed, 18 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c
b/drivers/staging/rtl8192u/r8190_rtl8256.c
index 0bedf88525cd..b169460b9f26 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -42,9 +42,9 @@ void phy_set_rf8256_bandwidth(struct net_device *dev, enum
ht_channel_width Band
switch (Bandwidth) {
case HT_CHANNEL_WIDTH_20:
- if (priv->card_8192_version == VERSION_819XU_A
- || priv->card_8192_version
- == VERSION_819XU_B) { /* 8256 D-cut,
E-cut, xiong: consider it later! */
+ if (priv->card_8192_version == VERSION_819XU_A
||
+ priv->card_8192_version ==
+ VERSION_819XU_B) { /* 8256 D-cut,
E-cut, xiong: consider it later! */
rtl8192_phy_SetRFReg(dev,
(enum rf90_radio_path_e)eRFPath,
0x0b, bMask12Bits, 0x100); /*
phy para:1ba */
@@ -79,10 +79,10 @@ void phy_set_rf8256_bandwidth(struct net_device *dev, enum
ht_channel_width Band
default:
RT_TRACE(COMP_ERR, "phy_set_rf8256_bandwidth():
unknown Bandwidth: %#X\n", Bandwidth);
break;
-
}
}
}
+
/*--------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
@@ -101,6 +101,7 @@ void phy_rf8256_config(struct net_device *dev)
/* Config BB and RF */
phy_rf8256_config_para_file(dev);
}
+
/*--------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
@@ -137,12 +138,12 @@ static void phy_rf8256_config_para_file(struct net_device
*dev)
break;
case RF90_PATH_B:
case RF90_PATH_D:
- u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs,
bRFSI_RFENV<<16);
+ u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs,
bRFSI_RFENV << 16);
break;
}
/*----Set RF_ENV enable----*/
- rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
+ rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV << 16, 0x1);
/*----Set RF_ENV output high----*/
rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
@@ -151,7 +152,7 @@ static void phy_rf8256_config_para_file(struct net_device
*dev)
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2,
b3WireAddressLength, 0x0); /* Set 0 to 4 bits for Z-serial and set 1 to 6 bits
for 8258 */
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength,
0x0); /* Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for
??? */
- rtl8192_phy_SetRFReg(dev, (enum rf90_radio_path_e) eRFPath,
0x0, bMask12Bits, 0xbf);
+ rtl8192_phy_SetRFReg(dev, (enum rf90_radio_path_e)eRFPath, 0x0,
bMask12Bits, 0xbf);
/* Check RF block (for FPGA platform only)----
* TODO: this function should be removed on ASIC , Emily
2007.2.2
@@ -207,7 +208,7 @@ static void phy_rf8256_config_para_file(struct net_device
*dev)
break;
case RF90_PATH_B:
case RF90_PATH_D:
- rtl8192_setBBreg(dev, pPhyReg->rfintfs,
bRFSI_RFENV<<16, u4RegValue);
+ rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV <<
16, u4RegValue);
break;
}
@@ -215,7 +216,6 @@ static void phy_rf8256_config_para_file(struct net_device
*dev)
RT_TRACE(COMP_ERR,
"phy_rf8256_config_para_file():Radio[%d] Fail!!", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
}
-
}
RT_TRACE(COMP_PHY, "PHY Initialization Success\n");
@@ -225,11 +225,11 @@ static void phy_rf8256_config_para_file(struct net_device
*dev)
RT_TRACE(COMP_ERR, "PHY Initialization failed\n");
}
-
void phy_set_rf8256_cck_tx_power(struct net_device *dev, u8 powerlevel)
{
u32 TxAGC = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
+
TxAGC = powerlevel;
if (priv->bDynamicTxLowPower) {
@@ -244,7 +244,6 @@ void phy_set_rf8256_cck_tx_power(struct net_device *dev, u8
powerlevel)
rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
}
-
void phy_set_rf8256_ofdm_tx_power(struct net_device *dev, u8 powerlevel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -255,16 +254,16 @@ void phy_set_rf8256_ofdm_tx_power(struct net_device *dev,
u8 powerlevel)
u8 byte0, byte1, byte2, byte3;
powerBase0 = powerlevel + priv->TxPowerDiff; /* OFDM rates */
- powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) |
powerBase0;
+ powerBase0 = (powerBase0 << 24) | (powerBase0 << 16) | (powerBase0 <<
8) | powerBase0;
powerBase1 = powerlevel;
/* MCS rates */
- powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) |
powerBase1;
+ powerBase1 = (powerBase1 << 24) | (powerBase1 << 16) | (powerBase1 <<
8) | powerBase1;
for (index = 0; index < 6; index++) {
- writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index
< 2)?powerBase0:powerBase1);
+ writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index
< 2) ? powerBase0 : powerBase1);
byte0 = (u8)(writeVal & 0x7f);
- byte1 = (u8)((writeVal & 0x7f00)>>8);
- byte2 = (u8)((writeVal & 0x7f0000)>>16);
- byte3 = (u8)((writeVal & 0x7f000000)>>24);
+ byte1 = (u8)((writeVal & 0x7f00) >> 8);
+ byte2 = (u8)((writeVal & 0x7f0000) >> 16);
+ byte3 = (u8)((writeVal & 0x7f000000) >> 24);
if (byte0 > 0x24)
/* Max power index = 0x24 */
@@ -278,7 +277,7 @@ void phy_set_rf8256_ofdm_tx_power(struct net_device *dev,
u8 powerlevel)
/* for tx power track */
if (index == 3) {
- writeVal_tmp = (byte3<<24) | (byte2<<16) | (byte1<<8) |
byte0;
+ writeVal_tmp = (byte3 << 24) | (byte2 << 16) | (byte1
<< 8) | byte0;
priv->Pwr_Track = writeVal_tmp;
}
@@ -288,10 +287,9 @@ void phy_set_rf8256_ofdm_tx_power(struct net_device *dev,
u8 powerlevel)
*/
writeVal = 0x03030303;
} else {
- writeVal = (byte3<<24) | (byte2<<16) | (byte1<<8) |
byte0;
+ writeVal = (byte3 << 24) | (byte2 << 16) | (byte1 << 8)
| byte0;
}
rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
}
return;
-
}
--
2.17.1
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
