From: Michael Hennerich <michael.henner...@analog.com> The SEPS525 is a 160 RGB x 128 Dots, 262K Colors PM-OLED Display Driver and Controller.
The controller can be found on the NHD-1.69-160128UGC3 (Newhaven Display International, Inc.). Datasheets: Link: https://www.newhavendisplay.com/appnotes/datasheets/OLEDs/SEPS525.pdf Signed-off-by: Michael Hennerich <michael.henner...@analog.com> Co-developed-by: Beniamin Bia <beniamin....@analog.com> Signed-off-by: Beniamin Bia <beniamin....@analog.com> --- MAINTAINERS | 8 ++ drivers/staging/fbtft/Kconfig | 7 + drivers/staging/fbtft/Makefile | 1 + drivers/staging/fbtft/fb_seps525.c | 213 +++++++++++++++++++++++++++++ 4 files changed, 229 insertions(+) create mode 100644 drivers/staging/fbtft/fb_seps525.c diff --git a/MAINTAINERS b/MAINTAINERS index ef00d6210cff..d077d04f9bc5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15389,6 +15389,14 @@ L: linux-wirel...@vger.kernel.org S: Supported F: drivers/staging/wilc1000/ +STAGING - SEPS525 LCD CONTROLLER DRIVERS +M: Michael Hennerich <michael.henner...@analog.com> +M: Beniamin Bia <beniamin....@analog.com> +L: linux-fb...@vger.kernel.org +S: Supported +F: drivers/staging/fbtft/fb_seps525.c +F: Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml + STAGING SUBSYSTEM M: Greg Kroah-Hartman <gre...@linuxfoundation.org> T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git diff --git a/drivers/staging/fbtft/Kconfig b/drivers/staging/fbtft/Kconfig index 8ec524a95ec8..55af11ee2f5b 100644 --- a/drivers/staging/fbtft/Kconfig +++ b/drivers/staging/fbtft/Kconfig @@ -112,6 +112,13 @@ config FB_TFT_S6D1121 help Generic Framebuffer support for S6D1121 +config FB_TFT_SEPS525 + tristate "FB driver for the SEPS525 LCD Controller" + depends on FB_TFT + help + Generic Framebuffer support for SEPS525 + Say Y if you have such a display that utilizes this controller. + config FB_TFT_SH1106 tristate "FB driver for the SH1106 OLED Controller" depends on FB_TFT diff --git a/drivers/staging/fbtft/Makefile b/drivers/staging/fbtft/Makefile index 6bc03311c9c7..e7a0cd9166e9 100644 --- a/drivers/staging/fbtft/Makefile +++ b/drivers/staging/fbtft/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_FB_TFT_PCD8544) += fb_pcd8544.o obj-$(CONFIG_FB_TFT_RA8875) += fb_ra8875.o obj-$(CONFIG_FB_TFT_S6D02A1) += fb_s6d02a1.o obj-$(CONFIG_FB_TFT_S6D1121) += fb_s6d1121.o +obj-$(CONFIG_FB_TFT_SEPS525) += fb_seps525.o obj-$(CONFIG_FB_TFT_SH1106) += fb_sh1106.o obj-$(CONFIG_FB_TFT_SSD1289) += fb_ssd1289.o obj-$(CONFIG_FB_TFT_SSD1305) += fb_ssd1305.o diff --git a/drivers/staging/fbtft/fb_seps525.c b/drivers/staging/fbtft/fb_seps525.c new file mode 100644 index 000000000000..05882e2cde7f --- /dev/null +++ b/drivers/staging/fbtft/fb_seps525.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * FB driver for the NHD-1.69-160128UGC3 (Newhaven Display International, Inc.) + * using the SEPS525 (Syncoam) LCD Controller + * + * Copyright (C) 2016 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> + +#include "fbtft.h" + +#define DRVNAME "fb_seps525" +#define WIDTH 160 +#define HEIGHT 128 + +#define SEPS525_INDEX 0x00 +#define SEPS525_STATUS_RD 0x01 +#define SEPS525_OSC_CTL 0x02 +#define SEPS525_IREF 0x80 +#define SEPS525_CLOCK_DIV 0x03 +#define SEPS525_REDUCE_CURRENT 0x04 +#define SEPS525_SOFT_RST 0x05 +#define SEPS525_DISP_ONOFF 0x06 +#define SEPS525_PRECHARGE_TIME_R 0x08 +#define SEPS525_PRECHARGE_TIME_G 0x09 +#define SEPS525_PRECHARGE_TIME_B 0x0A +#define SEPS525_PRECHARGE_CURRENT_R 0x0B +#define SEPS525_PRECHARGE_CURRENT_G 0x0C +#define SEPS525_PRECHARGE_CURRENT_B 0x0D +#define SEPS525_DRIVING_CURRENT_R 0x10 +#define SEPS525_DRIVING_CURRENT_G 0x11 +#define SEPS525_DRIVING_CURRENT_B 0x12 +#define SEPS525_DISPLAYMODE_SET 0x13 +#define SEPS525_RGBIF 0x14 +#define SEPS525_RGB_POL 0x15 +#define SEPS525_MEMORY_WRITEMODE 0x16 +#define SEPS525_MX1_ADDR 0x17 +#define SEPS525_MX2_ADDR 0x18 +#define SEPS525_MY1_ADDR 0x19 +#define SEPS525_MY2_ADDR 0x1A +#define SEPS525_MEMORY_ACCESS_POINTER_X 0x20 +#define SEPS525_MEMORY_ACCESS_POINTER_Y 0x21 +#define SEPS525_DDRAM_DATA_ACCESS_PORT 0x22 +#define SEPS525_GRAY_SCALE_TABLE_INDEX 0x50 +#define SEPS525_GRAY_SCALE_TABLE_DATA 0x51 +#define SEPS525_DUTY 0x28 +#define SEPS525_DSL 0x29 +#define SEPS525_D1_DDRAM_FAC 0x2E +#define SEPS525_D1_DDRAM_FAR 0x2F +#define SEPS525_D2_DDRAM_SAC 0x31 +#define SEPS525_D2_DDRAM_SAR 0x32 +#define SEPS525_SCR1_FX1 0x33 +#define SEPS525_SCR1_FX2 0x34 +#define SEPS525_SCR1_FY1 0x35 +#define SEPS525_SCR1_FY2 0x36 +#define SEPS525_SCR2_SX1 0x37 +#define SEPS525_SCR2_SX2 0x38 +#define SEPS525_SCR2_SY1 0x39 +#define SEPS525_SCR2_SY2 0x3A +#define SEPS525_SCREEN_SAVER_CONTEROL 0x3B +#define SEPS525_SS_SLEEP_TIMER 0x3C +#define SEPS525_SCREEN_SAVER_MODE 0x3D +#define SEPS525_SS_SCR1_FU 0x3E +#define SEPS525_SS_SCR1_MXY 0x3F +#define SEPS525_SS_SCR2_FU 0x40 +#define SEPS525_SS_SCR2_MXY 0x41 +#define SEPS525_MOVING_DIRECTION 0x42 +#define SEPS525_SS_SCR2_SX1 0x47 +#define SEPS525_SS_SCR2_SX2 0x48 +#define SEPS525_SS_SCR2_SY1 0x49 +#define SEPS525_SS_SCR2_SY2 0x4A + +/* SEPS525_DISPLAYMODE_SET */ +#define MODE_SWAP_BGR BIT(7) +#define MODE_SM BIT(6) +#define MODE_RD BIT(5) +#define MODE_CD BIT(4) + +#define seps525_use_window 0 /* FBTFT doesn't really use it today */ + +/* Init sequence taken from: Arduino Library for the Adafruit 2.2" display */ +static int init_display(struct fbtft_par *par) +{ + par->fbtftops.reset(par); + + usleep_range(1000, 5000); + + /* Disable Oscillator Power Down */ + write_reg(par, SEPS525_REDUCE_CURRENT, 0x03); + usleep_range(1000, 5000); + /* Set Normal Driving Current */ + write_reg(par, SEPS525_REDUCE_CURRENT, 0x00); + usleep_range(1000, 5000); + + write_reg(par, SEPS525_SCREEN_SAVER_CONTEROL, 0x00); + /* Set EXPORT1 Pin at Internal Clock */ + write_reg(par, SEPS525_OSC_CTL, 0x01); + /* Set Clock as 120 Frames/Sec */ + write_reg(par, SEPS525_CLOCK_DIV, 0x90); + /* Set Reference Voltage Controlled by External Resister */ + write_reg(par, SEPS525_IREF, 0x01); + + /* precharge time R G B */ + write_reg(par, SEPS525_PRECHARGE_TIME_R, 0x04); + write_reg(par, SEPS525_PRECHARGE_TIME_G, 0x05); + write_reg(par, SEPS525_PRECHARGE_TIME_B, 0x05); + + /* precharge current R G B (uA) */ + write_reg(par, SEPS525_PRECHARGE_CURRENT_R, 0x9D); + write_reg(par, SEPS525_PRECHARGE_CURRENT_G, 0x8C); + write_reg(par, SEPS525_PRECHARGE_CURRENT_B, 0x57); + + /* driving current R G B (uA) */ + write_reg(par, SEPS525_DRIVING_CURRENT_R, 0x56); + write_reg(par, SEPS525_DRIVING_CURRENT_G, 0x4D); + write_reg(par, SEPS525_DRIVING_CURRENT_B, 0x46); + /* Set Color Sequence */ + write_reg(par, SEPS525_DISPLAYMODE_SET, 0xA0); + write_reg(par, SEPS525_RGBIF, 0x01); /* Set MCU Interface Mode */ + /* Set Memory Write Mode */ + write_reg(par, SEPS525_MEMORY_WRITEMODE, 0x66); + write_reg(par, SEPS525_DUTY, 0x7F); /* 1/128 Duty (0x0F~0x7F) */ + /* Set Mapping RAM Display Start Line (0x00~0x7F) */ + write_reg(par, SEPS525_DSL, 0x00); + write_reg(par, SEPS525_DISP_ONOFF, 0x01); /* Display On (0x00/0x01) */ + /* Set All Internal Register Value as Normal Mode */ + write_reg(par, SEPS525_SOFT_RST, 0x00); + /* Set RGB Interface Polarity as Active Low */ + write_reg(par, SEPS525_RGB_POL, 0x00); + + write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT); + + return 0; +} + +static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) +{ + if (seps525_use_window) { + /* Set Window Xs,Ys Xe,Ye*/ + write_reg(par, SEPS525_MX1_ADDR, xs); + write_reg(par, SEPS525_MX2_ADDR, xe); + write_reg(par, SEPS525_MY1_ADDR, ys); + write_reg(par, SEPS525_MY2_ADDR, ye); + } + /* start position X,Y */ + write_reg(par, SEPS525_MEMORY_ACCESS_POINTER_X, xs); + write_reg(par, SEPS525_MEMORY_ACCESS_POINTER_Y, ys); + + write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT); +} + +static int set_var(struct fbtft_par *par) +{ + u8 val; + + switch (par->info->var.rotate) { + case 0: + val = 0; + break; + case 180: + val = MODE_RD | MODE_CD; + break; + case 90: + case 270: + + default: + return -EINVAL; + } + /* Memory Access Control */ + write_reg(par, SEPS525_DISPLAYMODE_SET, val | + (par->bgr ? MODE_SWAP_BGR : 0)); + + write_reg(par, SEPS525_DDRAM_DATA_ACCESS_PORT); + + return 0; +} + +static struct fbtft_display display = { + .regwidth = 8, + .width = WIDTH, + .height = HEIGHT, + .fbtftops = { + .init_display = init_display, + .set_addr_win = set_addr_win, + .set_var = set_var, + }, +}; + +FBTFT_REGISTER_DRIVER(DRVNAME, "syncoam,seps525", &display); + +MODULE_ALIAS("spi:" DRVNAME); +MODULE_ALIAS("platform:" DRVNAME); +MODULE_ALIAS("spi:seps525"); +MODULE_ALIAS("platform:seps525"); + +MODULE_DESCRIPTION("FB driver for the SEPS525 LCD Controller"); +MODULE_AUTHOR("Michael Hennerich <michael.henner...@analog.com>"); +MODULE_LICENSE("GPL"); -- 2.17.1 _______________________________________________ devel mailing list de...@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
