Some defines are not aligned with tab=8, which is the
style defined on Linux. Adjust them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+hua...@kernel.org>
---
.../staging/hikey9xx/hisi-spmi-controller.c | 26 ++++++++++---------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c
b/drivers/staging/hikey9xx/hisi-spmi-controller.c
index 99cf757d76fe..7fae267a6062 100644
--- a/drivers/staging/hikey9xx/hisi-spmi-controller.c
+++ b/drivers/staging/hikey9xx/hisi-spmi-controller.c
@@ -18,10 +18,10 @@
/*
* SPMI register addr
*/
-#define SPMI_CHANNEL_OFFSET 0x0300
-#define SPMI_SLAVE_OFFSET 0x20
+#define SPMI_CHANNEL_OFFSET 0x0300
+#define SPMI_SLAVE_OFFSET 0x20
-#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
+#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
@@ -35,21 +35,21 @@
#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
-#define SPMI_PER_DATAREG_BYTE 4
+#define SPMI_PER_DATAREG_BYTE 4
/*
* SPMI cmd register
*/
-#define SPMI_APB_SPMI_CMD_EN BIT(31)
+#define SPMI_APB_SPMI_CMD_EN BIT(31)
#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
-#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
-#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
#define bswap_32(X) \
((((u32)(X) & 0xff000000) >> 24) | \
(((u32)(X) & 0x00ff0000) >> 8) | \
(((u32)(X) & 0x0000ff00) << 8) | \
(((u32)(X) & 0x000000ff) << 24))
+#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
+#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
/* Command Opcodes */
@@ -70,15 +70,15 @@ enum spmi_controller_cmd_op_code {
/*
* SPMI status register
*/
-#define SPMI_APB_TRANS_DONE BIT(0)
-#define SPMI_APB_TRANS_FAIL BIT(2)
+#define SPMI_APB_TRANS_DONE BIT(0)
+#define SPMI_APB_TRANS_FAIL BIT(2)
/* Command register fields */
#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
/* Maximum number of support PMIC peripherals */
#define SPMI_CONTROLLER_TIMEOUT_US 1000
-#define SPMI_CONTROLLER_MAX_TRANS_BYTES (16)
+#define SPMI_CONTROLLER_MAX_TRANS_BYTES 16
/*
* @base base address of the PMIC Arbiter core registers.
@@ -114,8 +114,10 @@ static int spmi_controller_wait_for_done(struct
spmi_controller_dev *ctrl_dev,
{
u32 status = 0;
u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
- u32 offset = SPMI_APB_SPMI_STATUS_BASE_ADDR + SPMI_CHANNEL_OFFSET *
ctrl_dev->channel
- + SPMI_SLAVE_OFFSET * sid;
+ u32 offset;
+
+ offset = SPMI_APB_SPMI_STATUS_BASE_ADDR;
+ offset += SPMI_CHANNEL_OFFSET * ctrl_dev->channel + SPMI_SLAVE_OFFSET *
sid;
while (timeout--) {
status = readl(base + offset);
--
2.26.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
