Right now, driver is printing some messages as:
[ 33.833026] (NULL device *): spmi_read_cmd: id:0 addr:0x17, read
value: 00
This is because dev_foo() are not using a device with a name
set. Change the logic for it to print it right.
Signed-off-by: Mauro Carvalho Chehab <mchehab+hua...@kernel.org>
---
.../staging/hikey9xx/hisi-spmi-controller.c | 41 ++++++++++---------
1 file changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c
b/drivers/staging/hikey9xx/hisi-spmi-controller.c
index e996114bc717..153bcdb0cde4 100644
--- a/drivers/staging/hikey9xx/hisi-spmi-controller.c
+++ b/drivers/staging/hikey9xx/hisi-spmi-controller.c
@@ -102,7 +102,8 @@ struct spmi_controller_dev {
u32 channel;
};
-static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
+static int spmi_controller_wait_for_done(struct device *dev,
+ struct spmi_controller_dev *ctrl_dev,
void __iomem *base, u8 sid, u16 addr)
{
u32 status = 0;
@@ -117,19 +118,17 @@ static int spmi_controller_wait_for_done(struct
spmi_controller_dev *ctrl_dev,
if (status & SPMI_APB_TRANS_DONE) {
if (status & SPMI_APB_TRANS_FAIL) {
- dev_err(ctrl_dev->dev,
- "%s: transaction failed (0x%x)\n",
+ dev_err(dev, "%s: transaction failed (0x%x)\n",
__func__, status);
return -EIO;
}
+ dev_dbg(dev, "%s: status 0x%x\n", __func__, status);
return 0;
}
udelay(1);
}
- dev_err(ctrl_dev->dev,
- "%s: timeout, status 0x%x\n",
- __func__, status);
+ dev_err(dev, "%s: timeout, status 0x%x\n", __func__, status);
return -ETIMEDOUT;
}
@@ -145,9 +144,9 @@ static int spmi_read_cmd(struct spmi_controller *ctrl,
u8 op_code, i;
if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
- dev_err(spmi_controller->dev
- , "spmi_controller supports 1..%d bytes per trans, but:%ld
requested"
- , SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans,
but:%ld requested",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
return -EINVAL;
}
@@ -159,7 +158,7 @@ static int spmi_read_cmd(struct spmi_controller *ctrl,
} else if (opc == SPMI_CMD_EXT_READL) {
op_code = SPMI_CMD_EXT_REG_READ_L;
} else {
- dev_err(spmi_controller->dev, "invalid read cmd 0x%x", opc);
+ dev_err(&ctrl->dev, "invalid read cmd 0x%x", opc);
return -EINVAL;
}
@@ -173,7 +172,7 @@ static int spmi_read_cmd(struct spmi_controller *ctrl,
writel(cmd, spmi_controller->base + chnl_ofst +
SPMI_APB_SPMI_CMD_BASE_ADDR);
- rc = spmi_controller_wait_for_done(spmi_controller,
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
spmi_controller->base, sid, addr);
if (rc)
goto done;
@@ -195,10 +194,11 @@ static int spmi_read_cmd(struct spmi_controller *ctrl,
done:
spin_unlock_irqrestore(&spmi_controller->lock, flags);
if (rc)
- dev_err(spmi_controller->dev, "spmi read wait timeout op:0x%x
sid:%d addr:0x%x bc:%ld\n",
+ dev_err(&ctrl->dev,
+ "spmi read wait timeout op:0x%x sid:%d addr:0x%x
bc:%ld\n",
opc, sid, addr, bc + 1);
else
- dev_dbg(spmi_controller->dev, "%s: id:%d addr:0x%x, read value:
%*ph\n",
+ dev_dbg(&ctrl->dev, "%s: id:%d addr:0x%x, read value: %*ph\n",
__func__, sid, addr, (int)bc, __buf);
return rc;
@@ -216,9 +216,9 @@ static int spmi_write_cmd(struct spmi_controller *ctrl,
u8 op_code, i;
if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
- dev_err(spmi_controller->dev
- , "spmi_controller supports 1..%d bytes per trans, but:%ld
requested"
- , SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ dev_err(&ctrl->dev,
+ "spmi_controller supports 1..%d bytes per trans,
but:%ld requested",
+ SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
return -EINVAL;
}
@@ -230,7 +230,7 @@ static int spmi_write_cmd(struct spmi_controller *ctrl,
} else if (opc == SPMI_CMD_EXT_WRITEL) {
op_code = SPMI_CMD_EXT_REG_WRITE_L;
} else {
- dev_err(spmi_controller->dev, "invalid write cmd 0x%x", opc);
+ dev_err(&ctrl->dev, "invalid write cmd 0x%x", opc);
return -EINVAL;
}
@@ -262,14 +262,15 @@ static int spmi_write_cmd(struct spmi_controller *ctrl,
/* Start the transaction */
writel(cmd, spmi_controller->base + chnl_ofst +
SPMI_APB_SPMI_CMD_BASE_ADDR);
- rc = spmi_controller_wait_for_done(spmi_controller,
spmi_controller->base, sid, addr);
+ rc = spmi_controller_wait_for_done(&ctrl->dev, spmi_controller,
+ spmi_controller->base, sid, addr);
spin_unlock_irqrestore(&spmi_controller->lock, flags);
if (rc)
- dev_err(spmi_controller->dev, "spmi write wait timeout op:0x%x
sid:%d addr:0x%x bc:%ld\n",
+ dev_err(&ctrl->dev, "spmi write wait timeout op:0x%x sid:%d
addr:0x%x bc:%ld\n",
opc, sid, addr, bc);
else
- dev_dbg(spmi_controller->dev, "%s: id:%d addr:0x%x, wrote
value: %*ph\n",
+ dev_dbg(&ctrl->dev, "%s: id:%d addr:0x%x, wrote value: %*ph\n",
__func__, sid, addr, (int)bc, __buf);
return rc;
--
2.26.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
