From: Mayulong <mayulo...@huawei.com>
Add the SPMI controller code required to use the Kirin 970
SPMI bus.
[mchehab+hua...@kernel.org: added just the SPMI controller on this patch]
The complete patch is at:
https://github.com/96boards-hikey/linux/commit/08464419fba2
Signed-off-by: Mayulong <mayulo...@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+hua...@kernel.org>
---
.../staging/hikey9xx/hisi-spmi-controller.c | 390 ++++++++++++++++++
1 file changed, 390 insertions(+)
create mode 100644 drivers/staging/hikey9xx/hisi-spmi-controller.c
diff --git a/drivers/staging/hikey9xx/hisi-spmi-controller.c
b/drivers/staging/hikey9xx/hisi-spmi-controller.c
new file mode 100644
index 000000000000..987526c8b49f
--- /dev/null
+++ b/drivers/staging/hikey9xx/hisi-spmi-controller.c
@@ -0,0 +1,390 @@
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/spmi.h>
+#include <linux/spmi.h>
+
+#define SPMI_CONTROLLER_NAME "spmi_controller"
+
+/*
+ * SPMI register addr
+ */
+#define SPMI_CHANNEL_OFFSET 0x0300
+#define SPMI_SLAVE_OFFSET 0x20
+
+#define SPMI_APB_SPMI_CMD_BASE_ADDR 0x0100
+/*lint -e750 -esym(750,*)*/
+#define SPMI_APB_SPMI_WDATA0_BASE_ADDR 0x0104
+#define SPMI_APB_SPMI_WDATA1_BASE_ADDR 0x0108
+#define SPMI_APB_SPMI_WDATA2_BASE_ADDR 0x010c
+#define SPMI_APB_SPMI_WDATA3_BASE_ADDR 0x0110
+
+#define SPMI_APB_SPMI_STATUS_BASE_ADDR 0x0200
+
+#define SPMI_APB_SPMI_RDATA0_BASE_ADDR 0x0204
+#define SPMI_APB_SPMI_RDATA1_BASE_ADDR 0x0208
+#define SPMI_APB_SPMI_RDATA2_BASE_ADDR 0x020c
+#define SPMI_APB_SPMI_RDATA3_BASE_ADDR 0x0210
+/*lint +e750 -esym(750,*)*/
+
+#define SPMI_PER_DATAREG_BYTE 4
+/*
+ * SPMI cmd register
+ */
+#define SPMI_APB_SPMI_CMD_EN (1 <<
31)
+#define SPMI_APB_SPMI_CMD_TYPE_OFFSET 24
+#define SPMI_APB_SPMI_CMD_LENGTH_OFFSET 20
+#define SPMI_APB_SPMI_CMD_SLAVEID_OFFSET 16
+#define SPMI_APB_SPMI_CMD_ADDR_OFFSET 0
+
+#define Tranverse32(X) ((((u32)(X) & 0xff000000) >> 24) | \
+ (((u32)(X) &
0x00ff0000) >> 8) | \
+ (((u32)(X) &
0x0000ff00) << 8) | \
+ (((u32)(X) &
0x000000ff) << 24))
+
+/* Command Opcodes */
+/*lint -e749 -esym(749,*)*/
+enum spmi_controller_cmd_op_code {
+ SPMI_CMD_REG_ZERO_WRITE = 0,
+ SPMI_CMD_REG_WRITE = 1,
+ SPMI_CMD_REG_READ = 2,
+ SPMI_CMD_EXT_REG_WRITE = 3,
+ SPMI_CMD_EXT_REG_READ = 4,
+ SPMI_CMD_EXT_REG_WRITE_L = 5,
+ SPMI_CMD_EXT_REG_READ_L = 6,
+ SPMI_CMD_REG_RESET = 7,
+ SPMI_CMD_REG_SLEEP = 8,
+ SPMI_CMD_REG_SHUTDOWN = 9,
+ SPMI_CMD_REG_WAKEUP = 10,
+};
+/*lint +e749 -esym(749,*)*/
+
+/*
+ * SPMI status register
+ */
+#define SPMI_APB_TRANS_DONE (1 << 0)
+#define SPMI_APB_TRANS_FAIL (1 << 2)
+
+/* Command register fields */
+#define SPMI_CONTROLLER_CMD_MAX_BYTE_COUNT 16
+
+/* Maximum number of support PMIC peripherals */
+#define SPMI_CONTROLLER_TIMEOUT_US 1000
+#define SPMI_CONTROLLER_MAX_TRANS_BYTES (16)
+
+#define SPMI_WRITEL( dev, reg, addr ) \
+ do { \
+ writel( ( reg ), ( addr ) ); \
+ } while (0)
+
+#define SPMI_READL( dev, reg, addr ) \
+ do { \
+ reg = readl( addr ); \
+ } while (0)
+
+/*
+ * @base base address of the PMIC Arbiter core registers.
+ * @rdbase, @wrbase base address of the PMIC Arbiter read core registers.
+ * For HW-v1 these are equal to base.
+ * For HW-v2, the value is the same in eeraly probing, in order to read
+ * PMIC_ARB_CORE registers, then chnls, and obsrvr are set to
+ * PMIC_ARB_CORE_REGISTERS and PMIC_ARB_CORE_REGISTERS_OBS respectivly.
+ * @intr base address of the SPMI interrupt control registers
+ * @ppid_2_chnl_tbl lookup table f(SID, Periph-ID) -> channel num
+ * entry is only valid if corresponding bit is set in valid_ppid_bitmap.
+ * @valid_ppid_bitmap bit is set only for valid ppids.
+ * @fmt_cmd formats a command to be set into PMIC_ARBq_CHNLn_CMD
+ * @chnl_ofst calculates offset of the base of a channel reg space
+ * @ee execution environment id
+ * @irq_acc0_init_val initial value of the interrupt accumulator at probe time.
+ * Use for an HW workaround. On handling interrupts, the first accumulator
+ * register will be compared against this value, and bits which are set at
+ * boot will be ignored.
+ * @reserved_chnl entry of ppid_2_chnl_tbl that this driver should never touch.
+ * value is positive channel number or negative to mark it unused.
+ */
+struct spmi_controller_dev {
+ struct spmi_controller *controller;
+ struct device *dev;
+ void __iomem *base;
+ spinlock_t lock;
+ u32 channel;
+};
+
+static int spmi_controller_wait_for_done(struct spmi_controller_dev *ctrl_dev,
+ void __iomem *base, u8 sid, u16 addr)
+{
+ u32 status = 0;
+ u32 timeout = SPMI_CONTROLLER_TIMEOUT_US;
+ u32 offset = SPMI_APB_SPMI_STATUS_BASE_ADDR + SPMI_CHANNEL_OFFSET *
ctrl_dev->channel
+ + SPMI_SLAVE_OFFSET * sid;
+
+ while (timeout--) {
+ SPMI_READL(ctrl_dev->dev, status, base + offset);/*lint !e732 */
+
+ if (status & SPMI_APB_TRANS_DONE) {
+ if (status & SPMI_APB_TRANS_FAIL) {
+ dev_err(ctrl_dev->dev,
+ "%s: transaction failed (0x%x)\n",
+ __func__, status);
+ return -EIO;
+ }
+ return 0;
+ }
+ udelay(1);/*lint !e778 !e774 !e747*/
+ }
+
+ dev_err(ctrl_dev->dev,
+ "%s: timeout, status 0x%x\n",
+ __func__, status);
+ return -ETIMEDOUT;/*lint !e438*/
+}/*lint !e715 !e529*/
+
+static int spmi_read_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 sid, u16 addr, u8 *buf, size_t bc)
+{
+ struct spmi_controller_dev *spmi_controller =
dev_get_drvdata(&ctrl->dev);
+ unsigned long flags;
+ u32 cmd, data;
+ int rc;
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET*spmi_controller->channel;
+ u8 op_code, i;
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(spmi_controller->dev
+ , "spmi_controller supports 1..%d bytes per trans, but:%ld
requested"
+ , SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (SPMI_CMD_READ == opc)
+ op_code = SPMI_CMD_REG_READ;
+ else if (SPMI_CMD_EXT_READ == opc)
+ op_code = SPMI_CMD_EXT_REG_READ;
+ else if (SPMI_CMD_EXT_READL == opc)
+ op_code = SPMI_CMD_EXT_REG_READ_L;
+ else {
+ dev_err(spmi_controller->dev, "invalid read cmd 0x%x", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |/*lint !e648 !e701 */
/* cmd_en */
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |/*lint !e648 !e701
*/ /* cmd_type */
+ ((bc-1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |/*lint !e648
!e701 */ /* byte_cnt */
+ ((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
/* slvid */
+ ((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
/* slave_addr */
+
+ spin_lock_irqsave(&spmi_controller->lock, flags);/*lint !e550 */
+
+ SPMI_WRITEL(spmi_controller->dev, cmd, spmi_controller->base +
chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+
+ rc = spmi_controller_wait_for_done(spmi_controller,
spmi_controller->base, sid, addr);
+ if (rc)
+ goto done;
+
+ i = 0;
+ do {
+ SPMI_READL(spmi_controller->dev, data, spmi_controller->base +
chnl_ofst + SPMI_SLAVE_OFFSET*sid + SPMI_APB_SPMI_RDATA0_BASE_ADDR +
i*SPMI_PER_DATAREG_BYTE);/*lint !e732 */
+ data = Tranverse32(data);
+ if ((bc - i*SPMI_PER_DATAREG_BYTE ) >> 2) {/*lint !e702 */
+ memcpy(buf, &data, sizeof(data));
+ buf += sizeof(data);
+ } else {
+ memcpy(buf, &data, bc%SPMI_PER_DATAREG_BYTE);/*lint
!e747 */
+ buf += (bc%SPMI_PER_DATAREG_BYTE);
+ }
+ i++;
+ } while (bc > i*SPMI_PER_DATAREG_BYTE);
+
+done:
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+ if (rc)
+ dev_err(spmi_controller->dev, "spmi read wait timeout op:0x%x
sid:%d addr:0x%x bc:%ld\n",
+ opc, sid, addr, bc + 1);
+ return rc;
+}/*lint !e550 !e529*/
+
+/*lint -e438 -esym(438,*)*/
+static int spmi_write_cmd(struct spmi_controller *ctrl,
+ u8 opc, u8 sid, u16 addr, const u8 *buf, size_t
bc)
+{
+ struct spmi_controller_dev *spmi_controller =
dev_get_drvdata(&ctrl->dev);
+ unsigned long flags;
+ u32 cmd;
+ u32 data = 0;
+ int rc;
+ u32 chnl_ofst = SPMI_CHANNEL_OFFSET*spmi_controller->channel;
+ u8 op_code, i;
+
+
+ if (bc > SPMI_CONTROLLER_MAX_TRANS_BYTES) {
+ dev_err(spmi_controller->dev
+ , "spmi_controller supports 1..%d bytes per trans, but:%ld
requested"
+ , SPMI_CONTROLLER_MAX_TRANS_BYTES, bc);
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (SPMI_CMD_WRITE == opc)
+ op_code = SPMI_CMD_REG_WRITE;
+ else if (SPMI_CMD_EXT_WRITE == opc)
+ op_code = SPMI_CMD_EXT_REG_WRITE;
+ else if (SPMI_CMD_EXT_WRITEL == opc)
+ op_code = SPMI_CMD_EXT_REG_WRITE_L;
+ else {
+ dev_err(spmi_controller->dev, "invalid write cmd 0x%x", opc);
+ return -EINVAL;
+ }
+
+ cmd = SPMI_APB_SPMI_CMD_EN |/*lint !e648 !e701 */
/* cmd_en */
+ (op_code << SPMI_APB_SPMI_CMD_TYPE_OFFSET) |/*lint !e648 !e701
*/ /* cmd_type */
+ ((bc-1) << SPMI_APB_SPMI_CMD_LENGTH_OFFSET) |/*lint !e648
!e701 */ /* byte_cnt */
+ ((sid & 0xf) << SPMI_APB_SPMI_CMD_SLAVEID_OFFSET) |
/* slvid */
+ ((addr & 0xffff) << SPMI_APB_SPMI_CMD_ADDR_OFFSET);
/* slave_addr */
+
+ /* Write data to FIFOs */
+ spin_lock_irqsave(&spmi_controller->lock, flags);/*lint !e550 */
+
+ i = 0;
+ do {
+ memset(&data, 0, sizeof(data));
+ if ((bc - i*SPMI_PER_DATAREG_BYTE ) >> 2) {/*lint !e702 */
+ memcpy(&data, buf, sizeof(data));
+ buf +=sizeof(data);
+ } else {
+ memcpy(&data, buf, bc%SPMI_PER_DATAREG_BYTE);/*lint
!e747 */
+ buf +=(bc%SPMI_PER_DATAREG_BYTE);
+ }
+
+ data = Tranverse32(data);
+ SPMI_WRITEL(spmi_controller->dev, data, spmi_controller->base +
chnl_ofst + SPMI_APB_SPMI_WDATA0_BASE_ADDR+SPMI_PER_DATAREG_BYTE*i);
+ i++;
+ } while (bc > i*SPMI_PER_DATAREG_BYTE);
+
+ /* Start the transaction */
+ SPMI_WRITEL(spmi_controller->dev, cmd, spmi_controller->base +
chnl_ofst + SPMI_APB_SPMI_CMD_BASE_ADDR);
+
+ rc = spmi_controller_wait_for_done(spmi_controller,
spmi_controller->base, sid, addr);
+ spin_unlock_irqrestore(&spmi_controller->lock, flags);
+
+ if (rc)
+ dev_err(spmi_controller->dev, "spmi write wait timeout op:0x%x
sid:%d addr:0x%x bc:%ld\n",
+ opc, sid, addr, bc);
+
+ return rc;
+}/*lint !e438 !e550 !e529*/
+/*lint +e438 -esym(438,*)*/
+static int spmi_controller_probe(struct platform_device *pdev)
+{
+ struct spmi_controller_dev *spmi_controller;
+ struct spmi_controller *ctrl;
+ struct resource *iores;
+ int ret = 0;
+
+ printk(KERN_INFO "HISI SPMI probe\n");
+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*spmi_controller));
+ if (!ctrl) {
+ dev_err(&pdev->dev, "can not allocate spmi_controller data\n");
+ return -ENOMEM; /*lint !e429*/
+ }
+ spmi_controller = spmi_controller_get_drvdata(ctrl);
+ spmi_controller->controller = ctrl;
+
+ /* NOTE: driver uses the static register mapping */
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iores) {
+ dev_err(&pdev->dev, "can not get resource! \n");
+ return -EINVAL; /*lint !e429*/
+ }
+
+ spmi_controller->base = ioremap(iores->start, resource_size(iores));
+ if (!spmi_controller->base) {
+ dev_err(&pdev->dev, "can not remap base addr! \n");
+ return -EADDRNOTAVAIL; /*lint !e429*/
+ }
+ dev_dbg(&pdev->dev, "spmi_add_controller base addr=0x%lx!\n", (long
unsigned int)spmi_controller->base);/*lint !e774*/
+
+ /* Get properties from the device tree */
+ ret = of_property_read_u32(pdev->dev.of_node, "spmi-channel",
+ &spmi_controller->channel);/*lint !e838*/
+ if (ret) {
+ dev_err(&pdev->dev, "can not get chanel \n");
+ return -ENODEV; /*lint !e429*/
+ }
+
+ platform_set_drvdata(pdev, spmi_controller);
+ dev_set_drvdata(&ctrl->dev, spmi_controller);
+
+ spin_lock_init(&spmi_controller->lock);
+
+ ctrl->nr = spmi_controller->channel;
+ ctrl->dev.parent = pdev->dev.parent;
+ ctrl->dev.of_node = of_node_get(pdev->dev.of_node);
+
+ /* Callbacks */
+ ctrl->read_cmd = spmi_read_cmd;
+ ctrl->write_cmd = spmi_write_cmd;
+
+ ret = spmi_controller_add(ctrl);
+ if (ret) {
+ dev_err(&pdev->dev, "spmi_add_controller failed!\n");
+ goto err_add_controller;
+ }
+err_add_controller:
+ platform_set_drvdata(pdev, NULL);
+ return ret; /*lint !e429*/
+}
+
+static int spmi_del_controller(struct platform_device *pdev)
+{
+ struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ spmi_controller_remove(ctrl);
+ return 0;
+}
+
+static struct of_device_id spmi_controller_match_table[] = {
+ { .compatible = "hisilicon,spmi-controller",
+ },/*lint !e785*/
+ {}/*lint !e785*/
+};
+
+static struct platform_driver spmi_controller_driver = {
+ .probe = spmi_controller_probe,
+ .remove = spmi_del_controller,
+ .driver = {
+ .name = SPMI_CONTROLLER_NAME,
+ .owner = THIS_MODULE,/*lint !e64*/
+ .of_match_table = spmi_controller_match_table,
+ },/*lint !e785*/
+};/*lint !e785*/
+/*lint -e528 -esym(528,*)*/
+static int __init spmi_controller_init(void)
+{
+ return platform_driver_register(&spmi_controller_driver);/*lint !e64*/
+}
+postcore_initcall(spmi_controller_init);
+
+static void __exit spmi_controller_exit(void)
+{
+ platform_driver_unregister(&spmi_controller_driver);
+}
+module_exit(spmi_controller_exit);
+/*lint -e753 -esym(753,*)*/
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("1.0");/*lint !e785 !e64 !e528*/
+MODULE_ALIAS("platform:spmi_controlller");
+/*lint -e753 +esym(753,*)*/
+/*lint -e528 +esym(528,*)*/
+
--
2.26.2
_______________________________________________
devel mailing list
de...@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
