Dear Friends, The problem was with java class. We solved it by re-installing (build).
Example: remove source-dspace-server wget and unzip download source-dspace-server-7.6.1.zip cd source-dspace-server mvn package On Fri, 31 May 2024 at 16:56, Ricardo Ruiz Altamiranda <ric...@gmail.com> wrote: > > Hi, > > Handle Technical Manual ( > http://www.handle.net/tech_manual/HandleTechnicalManual.pdf ), says: > > > "The Handle.net software distribution comes with a browser-based > administrative client, "admin.war", > which could be accessed at https://IP-ADDRESS:8000/admin/, where the IP > address should be the > public address from siteinfo.json. Note that even though it is accessible > through the Handle server as > a convenience, this is a pure client, which talks to the handle server > over its public HTTP API, and > could in principle run anywhere". > > > > El lunes, 19 de febrero de 2024 a las 10:56:56 UTC-5, Mehmet Demirel > escribió: > >> Same Error. >> dspace bin/make-handle-config: line 63: /dspace/handle-server/config.dct: >> No such file or directory >> >> handle.prefix = 20.500.xxxx >> handle.canonical.prefix = https://hdl.handle.net/ >> handle.dir = ${dspace.dir}/handle-server >> >> On Friday 28 July 2023 at 03:46:25 UTC+3 Romy Forrer wrote: >> >>> Hi there >>> >>> I have had some problems trying to get the CNRI handle server >>> configuration done on our new Dspace 7.6 production RHEL 8 server. >>> >>> We are migrating from current 6.3 production server to 7.6 production >>> server next Tuesday so already have handle prefix etc. and just need to set >>> up the handle server config on new server to provide handle admins with new >>> sitebndl.zip. >>> >>> I initially followed instructions on >>> https://wiki.lyrasis.org/display/DSDOC7x/Handle.Net+Registry+Support just >>> using the command >>> >>> [dspace]/bin/make-handle-config >>> >>> This failed to prompt for any information/questions - all I got was >>> "writing simple Handle server configuration" – no error messages. However >>> when I opened config.dct to check it it had a different IP address to the >>> one we want to register and was missing the lines from server_config that >>> were supposed to appear so figured something went wrong in the process. >>> >>> I ran the command again hoping to get a complete file and it seemed to >>> work ok the second time (renamed previous config.dct and made a new one but >>> sitebndl.zip unchanged) - however I still didn't get any prompts for >>> information/questions. I sent the sitebndl.zip to CNRI handle admins and >>> asked them what IP/ports had come through in the sitebndl.zip since I >>> couldn’t specify in the question answers and they reported it was the IP >>> address we didn't want and also port 2643 instead of 2641 (which is the >>> default handle port and is the one we had opened in our firewall)? >>> >>> I found - >>> https://groups.google.com/g/dspace-tech/c/Dee91VMhkF8/m/mr7jCmmKAQAJ >>> and figured I would try that method instead. I renamed the previous >>> handle-server directory to handle-server-old and tried [dspace]/bin/dspace >>> make-handle-config [dspace]/handle-server as suggested and that worked to >>> bring up all the questions and the suggested default IP address and ports >>> in the prompts were correct so assume the sitebndl.zip is too. >>> >>> However it finished with the error message below and I not sure if this >>> is important or not for handle server operation (also had to add in the >>> server_config parameters for the plug in manually to config.dct). >>> >>> "*WARNING: Error adding admin.war to server:* >>> >>> *java.io.FileNotFoundException: /[dspace]/admin.war (No such file or >>> directory)* >>> >>> *You will have to add admin.war to the webapps subdirectory manually.*" >>> >>> Would someone be able to comment on whether or not we can just ignore >>> that error (webapps directory in the handle-server directory from the >>> original simple set up attempt was empty so hoping that admin.war isn't >>> actually required)? >>> >>> I won’t attempt to start the handle server until Tuesday when we have >>> officially cut over to the new production server so would be good to know >>> ahead of time. >>> >>> Our local.cfg still has some placeholder/test definitions in it since >>> we're not live yet - that may be why we had problems with >>> make-handle-config (was just trying to do it early so could get the new >>> sitebndl.zip to handle admins ahead of the change date). >>> >>> Kind Regards, >>> >>> Romy >>> >>> Romy Forrer (she/her) >>> >>> Library Systems Coordinator | *Kairuruku Ratonga Matihiko* >>> Library Access and Collections |*Tūāpā Kohinga* >>> Central Library | *Te Puna M**ātauraka o Waitaha* >>> >>> Puaka - James Hight Building| Room 519 >>> >>> *Phone:* +64 3 369 3875 >>> >>> University of Canterbury |Te Whare Wānanga o Waitaha |Private Bag 4800 >>> |Christchurch 8140| New Zealand >>> >>> >>> -- > All messages to this mailing list should adhere to the Code of Conduct: > https://www.lyrasis.org/about/Pages/Code-of-Conduct.aspx > --- > You received this message because you are subscribed to a topic in the > Google Groups "DSpace Technical Support" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/dspace-tech/yYrMAEeQP3M/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > dspace-tech+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/dspace-tech/c6fd2132-222a-468b-b957-1309fec04ba9n%40googlegroups.com > <https://groups.google.com/d/msgid/dspace-tech/c6fd2132-222a-468b-b957-1309fec04ba9n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- Kind regards, [image: Mehmet demirel] Mehmet Demirel Software Specialist, SelenSoft Software and Consulting Ltd. +90 212 909 2030 <+90+212+909+2030> | +90 532 354 3340 <+90+532+354+3340> | selensoft.com.tr meh...@selensoft.com.tr | İstanbul - Turkey <https://maps.google.com/?q=İstanbul+-+Turkey> Create your own email signature <https://www.wisestamp.com/create-own-signature/?utm_source=promotion&utm_medium=signature&utm_campaign=create_your_own&srcid=> -- All messages to this mailing list should adhere to the Code of Conduct: https://www.lyrasis.org/about/Pages/Code-of-Conduct.aspx --- You received this message because you are subscribed to the Google Groups "DSpace Technical Support" group. To unsubscribe from this group and stop receiving emails from it, send an email to dspace-tech+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/dspace-tech/CADROb%3DiUynp4JmRFTDLqp61QC4EkvGpzPUS6FWJWS8%2BVshBaGQ%40mail.gmail.com.
