I recently installed 8.0 on my 2300 and upgraded the OS to 8.1. All of the extensions (Apple Built-In Ethernet, Apple Ethernet CS, Apple Ethernet LC, Apple Ethernet NB and EtherTalk Phase 2) and control panels seem ok, but when I open the Appletalk Control Panel and click on the pull down list for "Connect Via", my only choices are Modem Port, Printer Port, and Remote Only. How can I get Ethernet to show up as an option? I have the identical extension set on my 6100 and ethernet works just fine.
I've used my Asante Micro EN/SC adapter on the duo when I had 8.5 but it isn't working now. When I try to install the software I get a message that the installer can't detect the adapter. The PWR light and a "U" light are on but not the TX or RX light. One last question. When I try to connect my internal modem using PPP, I keep getting a message that the port is in use. I've selected Remote Only and also turned off Appletalk, but still get the same message. What am I missing? Frank C. Modica 501 E. Green St. Urbana, IL. 61802 USA 1-217-367-4133 ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> Need help from a real person? Try. <[EMAIL PROTECTED]> ---------- Dr. Bott | 10/100 Ethernet for your 2400 is finally here! MPC-100 | <http://www.drbott.com/prod/mpc100.html> RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler CoolPad at Staples. Both in white for iBooks at <http://roadtools.com> Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][ MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
