There's no chance that you damaged the drive's ribbon cable when you
installed it, is there?
Josh
On Jan 24, 2008, at 7:54 PM, Sis, Joseph C Jr 1LT NG NG NGB wrote:
I don't think that is the issue. The "official" maximum OS on my
Powerbook 2400c and my PowerMac 6500 are both 9.1. However 9.2.2
installed via OS9 Helper works great on both of those machines.
In this case the Duo is not even recognizing the hard drive during
startup. I can hear the HD spin up briefly and then immediately the
blinking disc icon comes up. I suspect the 2400 may require a
unique HD driver, because when I put a new HD in the 2400 it had to
be reformatted by the 2400 in order to work.
I could reformat this HD in the 2300, but I am reluctant to do so.
Also, it may not be possible, as when I use Disk Tools on the floppy
- it cannot 'see' the internal 1.13G HD.
Thanks,
joe
To: "A place to discuss Apple's sub-portable computers."
<[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="iso-8859-1"
I researched and found that the 2300c can only run OS 9.1 or lower.
That may be your problem. Here is the website I found the
information at: http://www.danpalka.net/powerbookduo/profiles/duo2300c.html
Art in Silicon Valley
_______________________________________________
DuoList mailing list
[email protected]
http://listserver.themacintoshguy.com/mailman/listinfo/duolist
_______________________________________________
DuoList mailing list
[email protected]
http://listserver.themacintoshguy.com/mailman/listinfo/duolist
