Thank you Dean.
Q: What do we want?
A: To create a way of consistently producing 2300/300 that will kick Bruce
Lee's butt!
Q: Can it be done?
A: There's always a way if you are committed.
Q: How?
A: Specifically define what you want. Create an effective strategy to get
it. Take action. Notice if the plan is working. If it isn't then change your
approach until you get what you want.
----------
>From: Dean Suhr <[EMAIL PROTECTED]>
>To: Multiple recipients of DuoList <[EMAIL PROTECTED]>
>Subject: [Duo] Re: 2300/300 Crusade-why?
>Date: Wed, Jul 28, 1999, 3:16 PM
>
> Jeremy,
>
> So what's your point? Is there a reason that you choose to be rude
> instead of helpful? With the obvious attitude you have it is not clear
> what you are stating that is fact, what is supposition, and what is just
> fluff.
>
> I have been in the semiconductor industry for over 20 years. I
> understand the mechanical and thermal requirements of chips. I also
> understand the risks of reworking a QFP package. If I choose to hang
> onto the form factor, investment in docks & peripherals, and the
> usability of the Duo over that of any other powerbook does that give you
> an "open door" to criticize?
>
> Please - send your hostile mail to some other list.
>
> I hope you have a better day today!
>
> Dean ... another one - maybe it's a Dean thing.
>
>
> p.s. Eric - I know you're on vacation - but you might want to deal with
> this degarading attitute when you return.
>
>>>>>> On 7/28/99 0:21, Jeremy Wood wrote... <<<<<
>
>>I mean-really? Why?
>>
>>Why stop at 603e/300?
>>
>>Facts:
>>
>>1. 603e's are really goddamned slow. Especially on a 2300's wussy bus. It's
>>what , 32 bit/16.66mhz? Maybe 33.33mhz? SLOOOOWWWW.
>>
>>2. The G3 and the 603e are pin compatible. Think about that.
>>
>>3. Thought about that, did you?
>>
>>4. A 300 mhz 603e is going to be one hot son of a bitch. There is a good
>>reason apple only ever made a 240mhz 603e machine--they are hot little
>>beasts.
>>
>>5. RE: #4 Anyone who has ever touched the bottom of a fired up 2400 will
>>agree with the above statement.
>>
>>My suggestion:
>>(Assumming you find someone with the sill to do this silly thing, and the
>>equipment, and the time, and the nerve)
>>Buy a 300-366mhz G3 upgrade card (copper based) remove the G3. (Frankly I
>>doubt this can be done at all G3 or 603e) And slap that sucker into your
>>precious 2300. The big problem I can see with this whole project (aside
>>form the potential impossibility of removing a complex part like a modern
>>microprocessor without destroying it) is the fact that these parts (603's
>>of various die sizes and G3's) are not the same size, or even come in the
>>same package. It might be possible to allow for that with the mother of all
>>tackies, but that would be a crappy solution at best.
>>
>>So, give it up. Let go. Buy a 2400c. Or, if you really want to do something
>>down and dirty and exciting with your 2300, grab your book sprint out to
>>your car (or soemone else's), swing by the local 7-11 pick up some twinkies
>>and mellow yello, head out to the nearest intersate, and crak out you cell
>>phone (or someone else'e). Then, see if you can check your e-mail (or
>>someone else's), gorge, slurp, and speed --- without killing yourself.
>>You'll be less likely to ruin you r 2300, but more likely to kill your self
>>(or someone else).
>>
>>
>>good luck
>>
>>Jeremy Wood
>>[EMAIL PROTECTED]
> ----------
> Duo/2400 List, The friendliest place on the Net!
> A listserv for users and fans of Mac subportables.
> FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
> Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
>
> Dr. Bott LLC | Get a LapBottom with new �GRIPPIER� gripper pads!
> | http://www.drbott.com/prod/lapbot.html $23.00
>
> Midwest Mac Parts <http://www.midwestmac.com> | After-market parts
> for Macs. Fix your ticking dock for $59 w/ trade-in of PS. 888-356-1104
>
> PowerBook Guy is | Click here!
> Everything PowerBook! | http://www.powerbookguy.com
>
>
----------
Duo/2400 List, The friendliest place on the Net!
A listserv for users and fans of Mac subportables.
FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
Dr. Bott LLC | Get a LapBottom with new �GRIPPIER� gripper pads!
| http://www.drbott.com/prod/lapbot.html $23.00
Midwest Mac Parts <http://www.midwestmac.com> | After-market parts
for Macs. Fix your ticking dock for $59 w/ trade-in of PS. 888-356-1104
PowerBook Guy is | Click here!
Everything PowerBook! | http://www.powerbookguy.com
