Arnie, Everything is up and running, but the McAlly card bus won't load initially, that is, the 2400 won't start with the card inserted. I had similar problems with the TDK 10/100 card when I was experimenting several months ago with the unmodified cardbus supported 2400. Then and now I wait until the 2400 shows the first extension (in this case it's the G3 booster) and then shove in the card and it shows up. From then on everything works as advertised. I am using Apple's card bus support (USB Card Support 1.3.5.smi). I also downloaded USB Card Support 1.2.smi, but didn't try it as it is an earlier version. I assume that the above inability to load is typical and if not let me know what the fix might be. I can live with it, but I have to remember to eject the card (command Y) before restart (o.k. in sleep mode) or it won't restart unless I physically remove the card and then reinsert after startup. I am using OS 9 and the 400 MHz seems to be faster, but I haven't really got into timing and testing yet as I was concerned about getting everything running. The Vision Deluxe handheld synchs fine with the cardbus USB. Eventually, I want to use the IR feature, but need to educate myself some more. Have a happy new year and thanks for all your support. Dallas ---------- Duo/2400 List, The friendliest place on the Net! A listserv for users and fans of Mac subportables. FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> Be sure to visit Mac2400! <http://www.sineware.com/mac2400> X-Router | Share your DSL or cable modem between multiple computers! Dr. Bott | <http://www.drbott.com/prod/MIH120.html> PowerBook Guy is | Click here! Everything PowerBook! | http://www.powerbookguy.com Midwest Mac Parts ][ <http://www.midwestmac.com> After-market parts for Macs. ][ 888-356-1104 ][
