Anyone using a similar set-up? With similar problems or solutions, let me know
Thanks Steve KF2TI ------- Forwarded message follows ------- Send reply to: "R. P. Bell" <[EMAIL PROTECTED]> From: "R. P. Bell" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Subject: 73 de KX7Q re: MFJ 1262/63 Date sent: Fri, 30 Jan 2004 12:33:27 -0800 Hello Steve... I recently purchased an MFJ 1263 Mic/Radio Switch to use with my old Icom 735 and the MFJ 393 headset. It came with the Icom cable, but as you may be aware, MFC defaults the jumpers for Kenwood/Yaesu. I've not been able to get it working--not even with the Icom adapter cable or by making the jumper changes--nor has MFJ technical support (they didn't even have the manual; had to go get one out of a new box) and as we await specific word from the engineer it was suggested that I drop a note to you. You installed a 1262 mic switch and the 1275 sound card interface, apparently with excellent results. You mentioned in your review (posted on the MFJ site) that the connection was "a tad confusing," so between the MFJ tech, Jimmy and me, we decided that maybe you knew more about this than both of us combined. You don't mention if you connected yours to Kenwood/Yaesu or to Icom...I'm hoping you put it on an Icom and will have all the mysteries figured out. Any advice? 73 de KX7Q rpb San Bernardino, CA ------- End of forwarded message ------- Subscribe/unsubscribe, feedback, FAQ, problems http://njdxa.org/dx-chat To post a message, DX related items only, [EMAIL PROTECTED] This is the DX-CHAT reflector sponsored by the NJDXA http://njdxa.org
