I checked my Yaesu FT-920 for CW & CW-R and DX4WIN behaves normally. It reads either CW mode as CW. I'm running the same version of DX4WIN.
73; Kurt - W2MW -----Original Message----- From: Larry Benko [SMTP:[EMAIL PROTECTED] Sent: Tuesday, August 13, 2002 2:13 PM To: DX4WIN@mailman.qth.net Subject: [Dx4win] CW vs CW-R Just noticed that DX4Win ver 5.03 which I generally use with an Icom 756Pro interprets the radio in CW mode as CW but if the radio is in the CW-R mode then DX4Win interprets it as SSB mode. Same holds true for RTTY. Radio in RTTY mode is interpreted as RTTY by DX4Win but RTTY-R is interpreted by DX4Win as SSB. Can someone else verify this anomoly? 73, Larry Benko, W0QE _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win