David, Depends who you ask, but I came to the conclusion that the SWL wants confirmation from you, not who you worked. The station(s) worked information helps to locate a QSO that you can use to supply the necessary info for the SWL, but the callsign does not need to be printed on the SWL label..
Paul At 04:22 PM 2/9/02 -0500, K2DBK - David wrote: >I posted this a couple of weeks ago but didn't get any answers, thought I'd >try again... > >>I got a couple of SWL cards via the buro recently. I marked a QSO for SWL >>confirmation (via control-F2) and entered the SWL number. When I print >>(preview, actually) the label, I don't see the Callsign listed on the label. >>On the label, I see "SWL: NL 12345 R89" (the SWL number that I entered), and >>then the regular contact information, but the call of the other station in >>the QSO (i.e., the one that I worked) isn't shown anywhere on the label. >> >>My two questions are: A) Should the other station's callsign be on the label, >>and B) if so, how do I get it there (other than resorting to using a pen!) > >73, > David - K2DBK > >_______________________________________________ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Paul van der Eijk (KK4HD) [EMAIL PROTECTED] http://www.dx4win.com