Argh.. I figured it out. I've even answered this problem more than once.
I'm getting old.. Turn RTS and/or DTR on in preferences to power up the converter. Mike ----- Original Message ----- From: "Michael Walker" <[EMAIL PROTECTED]> To: "DX4Win >" <<[EMAIL PROTECTED]> Sent: Friday, April 18, 2003 2:05 PM Subject: Rig Communication problem > OK, I thought that I would never have to write an email like this, as I have > solved just about every radio communication problem that has been presented. > > That being said, DX4Win (5.03 on XP) and only DX4Win is not able to > communicate with the Radio IC-756Pro. > > So, I've done the obvious. > > WriteLog works with the IC-756. This eliminates the communication path and > the radio as part of the problem. I can even use Hyperterminal to see the > data coming out of the radio as well as using > > The Hex address and baud rate on the radio match Radio settings in DX4Win > (x'5C' and 19200--I've tried out other baud rates with no success). > > I've even re-installed 5.03 on top of the current installation. No joy > there either. It used to work with DX 5.03, but the last time I remember it > working was on another XP installation with the same hardware. > > So, what did I miss? I find it hard to believe that this is a DX4Win issue, > but it seems to point that way. > > Thanks in advance.. Mike VA3MW > > DX Cluster > telnet://va3mw.homeip.net:41112 >
