Ron Does your web browser work or you email from the same computer?
I seriously doubt that the problem is related to DX4Win and a reinstall won't make any difference. What is the Operating system? You also might have to open up all OUTBOUND ports on the firewall for TCP communication. Specifically, you can try and open up just 41112 (outbound) or port 23 (outbound). After you do that see if you can connect to my DX Cluster (VA3MW). Mike ----- Original Message ----- From: "Ron Kenwood" <[EMAIL PROTECTED]> To: <dx4win@mailman.qth.net> Sent: Monday, January 27, 2003 6:00 PM Subject: [Dx4win] Lost my TCP/IP spots. > I have lost my ability to connect to a TCP/IP node for spots. I recently > changed to a broadband (cable) connection and installed a software firewall. > Both of these are possible suspects, however when I use telnet outside of > DX4WIN, it connects fine. Any suggestions? > > Thanks, Ron > W3ZV > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >