>5. In summary my problem is that I need to tell DX4WIN that I am using COM > 4 to key the RigBlaster so the signal is passed to the mike input of the > transceiver.
Hi Rod, In the PSK31 Settings|TX section is the possibility to mark "USE CW CONTROL" this means it follows your preferences|SETTINGS for CW/PTT if you specify CW/PTT via LPT(x) then it will be keyed via this LPT(x) port if you specify CW/PTT via com(x) then it will be keyed that serial port 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B & RITTY CW & RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm MY SALESPAGE with radioamateur & computer parts http://www.on4aoi.be/sale.htm ----- Original Message ----- From: "WC7N" <[EMAIL PROTECTED]> To: "DX4WIN Group" <dx4win@mailman.qth.net> Sent: Thursday, January 30, 2003 9:42 PM Subject: [Dx4win] 6.1 and PSK > 1. I use a Rigblaster in line with my computer to key PSK-31. This has > always been done through COM 4. > > 2. In the old DX4WIN if you clicked on Settings|TX there was a spot to > specify the COM port for PSK-31 transmitting. > > 3. While the TX flag is in the new version it does not give me the ability > to specify what COM port it is to use. Therefore, I am unable to key the > transmitter in the PSK mode. The receive is fine and a double check with > the old DX4WIN showed no problems with receive. or transmit . > > 4. Does anybody have the answer for my problem. > > 5. In summary my problem is that I need to tell DX4WIN that I am using COM > 4 to key the RigBlaster so the signal is passed to the mike input of the > transceiver. > > Help please. > > Rod WC7N > [EMAIL PROTECTED] > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > >
