Hi Tom, Thanks for your comment but the QSX frequency is not the issue. Reread my specific example of the issue I found. I can duplicate it every time. I can take any one of the two dozen or so countries that I have confirmed on SSB and worked but not confirmed on any band on CW, make a callout for that country on CW on a band I have never worked that country, and the resultant spot is always Blue or Priority 4 and not Red Bolded to indicate a new band country. In the specific example I cite, Priority 4 is taking precedence over Priority 3 every time. Try it. Regards, Tony N2SS
At 10:09 AM 9/1/2003, Thomas Herrmann wrote: >The only way I have ever seen wrong colors was in connection with certain >QSX values. As far as the QSX value (i.e. QSX up 40) is not clearly to >identify (lsn at .040 or lsn +40kHz) and the QSX leaves the CW range into >PHONE range I got "new mode" indication. Similar situation appears if >there is a comment to address a different mode (i.e. ask him for SSB). >Please, check QSX and comments. > >73, Thomas > >Anthony R Gargano N2SS <[EMAIL PROTECTED]> schrieb am 01.09.03 15:08:41: > > > > Yann, there seems to be a Priority problem in the current version of the > > program. Based on the Priority definitions, my expectation is that an all > > time new band which is Priority 3 (Red Bolded) would take precedence over > > an unconfirmed mode which is Priority 4 (Blue). > > > > However, I have now noted multiple instances of different callouts where > > they were new all time bands but unconfirmed modes and the spots appeared > > as Priority 4 (Blue) instead of Priority 3 (Red Bolded). So, despite the > > numbers, Priority 3 vs Priority 4, it seems that the program logic being > > applied is that an unconfirmed mode is of higher priority than an all-time > > new band. I hope my explanation was clear. Tony N2SS > > > > At 04:02 AM 9/1/2003, you wrote: > > >From: "F5NBU" <[EMAIL PROTECTED]> > > >To: <dx4win@mailman.qth.net> > > >Date: Mon, 1 Sep 2003 08:24:30 +0200 > > >Subject: [Dx4win] color and priority > > > > > >hello > > >some problem with the color and priority for dx spot > > >exp: > > >this morning : > > >v63sxw spot on 40m cw > > >never contact on this band on any mode but work on cw on other band > but not > > >confirmed > > >the color was blue grey priority 4 > > > > > >5w0mw spot 40m cw > > >never contact on this band on any mode but contact on other band and > > >confirmed > > >the color was red and priority was 3 > > > > > >i sink the priority was the same for the 2 spot > > >priority 3 and red color > > > > > >tnx for help if it was a configuration problem > > > > > >best 73 > > > > > >Yann GELLENS > > >[EMAIL PROTECTED] > > > > > > > > > > > >--__--__-- > > > > > >_______________________________________________ > > >Dx4win mailing list > > >Dx4win@mailman.qth.net > > >http://mailman.qth.net/mailman/listinfo/dx4win > > > > > > > > >End of Dx4win Digest > > > > > > _______________________________________________ > > Dx4win mailing list > > Dx4win@mailman.qth.net > > http://mailman.qth.net/mailman/listinfo/dx4win > > >__________________________________________________________________________ >Die sicherste Form der Kommunikation: E-Mails verschluesseln, Spam-Filter, >Adressverifizierung, digitale Unterschrift: http://freemail.web.de
