Hello! I am using a 756P2 and no problems with DX4win, only when announcing a DX spot it does not show at the window the QSX frequency. My settings at DX4win are normal : address 00 and 19200. At the transceiver: CI-V Transceive= ON (If I set this OFF it does not work at all with DX4win) CI-V Address=64h CI-V Baud Rate=Auto If any help. 73, Jaime, EA6NB
>-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] Behalf Of Jim Reisert AD1C >Sent: Thursday, September 04, 2003 02:27 >To: Edgar Brown, N6OU; dx4win@mailman.qth.net >Subject: Re: [Dx4win] Bad QRG & flip flopping Band window with IC-756 >Pro II > > >Go into your transceiver settings and set CT-17 TRANSCEIVE to OFF. > >73 - Jim AD1C > >At 05:53 PM 9/3/2003, Edgar Brown, N6OU wrote: >>When using a 756 Pro II the information in the Band window jumps between >>SAT and the Band the radio is on. Also the frequency read when I key >>control R sometimes is correct and sometimes it is in error. >Occurs on all >>bands. For example it read 2,129,440 KHz when the true frequency was >>21,294.40 KHz. I have the 756 Pro selected as the radio. Does this >>require a Pro II radio file? Or am I missing something? It worked great >>with my IC-761 and IC-910H. I am using version 5.03 but the same >occurs in >>version 6. Help > > >-- >Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 >USA +978-251-9933, <[EMAIL PROTECTED]>, http://www.ad1c.com >PGP Fingerprint: D8E2 3D78 339F A7F1 8C13 1193 B5D1 4FB6 79D1 70DC > >_______________________________________________ >Dx4win mailing list >Dx4win@mailman.qth.net >http://mailman.qth.net/mailman/listinfo/dx4win
