Thanks Paul, The two items you mention were ok, and yes, I have Win 98. The good news is everything works now!
I switched over to another printer (a Cannon BJC 5100, also an old parallel printer), and labels printed fine. Went back to the HP DeskJet 500 and now it works also. I have no idea why, I had re-started many times. I wish I had tried the other printer before I started this thread! Oh well, I gained a lot, thanks to Terry, WK0F for the suggestion of cleaning out my Temp files, I had never done that and got rid of over 300 Mb of junk. It didn't help the original problem, but it sure can't hurt. Thanks all, Don ----- Original Message ----- From: "Paul van der Eijk" <[EMAIL PROTECTED]> To: "Donald Eriksen" <[EMAIL PROTECTED]>; <dx4win@mailman.qth.net> Sent: Wednesday, May 19, 2004 10:41 PM Subject: Re: [Dx4win] 6.03 woes > Don, > > 1. Check if the formatting of the QSL label makes sense. > > 2. Reboot the computer and only start dx4win (you may be running out > of resources running Windows98 by chance?) > > Paul > > At 11:35 AM 5/19/2004 -0700, Donald Eriksen wrote: > >Thanks to the responders to my print problem. I'm posting the error message > >data I get when I try to print QSL data in hopes Paul will see it and > >perhaps help me. > > > >Error > > > >An exception occurred! > >Access violation at address 00402B16 in module 'DX4WIN.EXE': Read address of > >FFFFFFFF > > > >I use an HP Deskjet 500 which prints fine on everything else and has worked > >fine with v. 6.02. > > > >Once or twice I got the message: "Exception Ocurred - Canvas does not allow > >drawing". > > > >I re-loaded 6.03 with the same results. I don't know what else to say about > >it. > > > >Don W6FFH > > > > > > > >_______________________________________________ > >Dx4win mailing list > >Dx4win@mailman.qth.net > >http://mailman.qth.net/mailman/listinfo/dx4win > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Paul van der Eijk (KK4HD) > [EMAIL PROTECTED] > http://www.dx4win.com > >