I've solved -MY- problem with getting the call look-up window to update with each new log entry. All I had to do is read the book ... sorry for the bandwidth.
I'd just upgraded to 6.03 and had assumed all my settings would remain from 6.02. 73! Ken Kopp - K0PP [EMAIL PROTECTED] From [EMAIL PROTECTED] Sat Sep 18 03:08:02 2004 From: [EMAIL PROTECTED] (Alan C. Zack) Date: Sat Sep 18 03:13:02 2004 Subject: [Dx4win] QSL printing In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> If I remember correctly, years ago the RAC only had one method of printing address labels. You did a Control P and out came your label. I see now the latest version of the RAC has several different options of printing labels, ASCII, Windows, and General. Then after you select your method of printing from these 3 options other options come up. I wonder what other people use and what is the preferred method amongst users. I have not tried this yet and would appreciate any pointers from those who have. TIA & 73 Garry Shapiro wrote: > John et al: > > Rod, WC7N points out that if one right-clicks in the Callsign/Mgr Lookup > window, or presses Alt-M while that window is active, the contents of the > window are copied to the QSL Mgr window and the callsign is displayed in the > entry box. It may still be necessary to edit out non-address info, such as > lat/long, grid square, county,etc. but this eliminates a select/copy/paste > operation! > > BTW, Rod and I are corresponding with K1XN about the optimum settings in the > Preferences/Ext Data window. Neither Rod nor I have a checkmark in the (EXE) > path, but, following Rod's advice, I have entered C:\GOLIST\GOWIN32.DLL in > the (DLL) path and enabled (checked) it. > > I think we are getting closer. > > Garry, NI6T > > Garry, > > I have the same issue with RAC 2004 with respect to getting address labels. > What I do is, is to enter the call in the QSL manager window and then hit F3 > to get the data from RAC. I then select the portion of the data I want to > use for the address and copy it using cntrl C and then close the RAC data > window. Then in the QSL manager window, I hit cntrl E and paste the address > data that I copied previously. This works, but is pretty cumbersome. If you > find a better way, I sure would like to know about it. I am thinking that it > is this way because there is a lot of extraneous data that comes from RAC > that is not pertinent to the needed address. > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > -- __________________________________________________________________________ Alan Zack Amateur Radio Station K7ACZ Las Vegas, Nevada, USA Quality Engineer, The Boeing Company, Retired Aviation Chief Warrant Officer, U.S. Coast Guard, Retired U.S. Coast Guard, Always Ready, Always There Every hour, Every day, Around the Clock and Around the World SEMPER PARATUS http://gocoastguard.com