Hi folks. the same problem was detected in the v. 6.02 On April, 8 2003 I wrot to Paul about the bug. Then the v. 603 was OK...... I think Paul will fix this "old" bug in the next ver. 7.02..... 73 Steve/I0MWI
-- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Niente paura, da oggi puoi recuperare i dati persi dal PC, semplice come cliccare qui Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=3361&d=22-6 From [EMAIL PROTECTED] Tue Jun 21 23:46:09 2005 From: [EMAIL PROTECTED] ([EMAIL PROTECTED]) Date: Wed Jun 22 09:56:59 2005 Subject: [Dx4win] LOTW report file & upload confirm flag Message-ID: <[EMAIL PROTECTED]> Hi Guys I recently uploaded about 45K QSO's to LOTW and received about 5K confirmed. I then imported the report file to DX4WIN using "imported QSO sets upload confirmed flag". I think (though I didn't count all of them) that all the confirmed QSO's uploaded correctly and the "upload confirmed flag" changed to yes for all of them. The dxcc report from LOTW and DX4WIN also matched 100%. Since that initial LOTW report file import I have imported additional report files as QSL's appeared in LOTW. Since these batches of confirmations were much smaller I have noticed that not all the "upload confirmed flags" are turning on for all the LOTW confirmations. In fact the last batch I tried none of the flags changed even though I had about 30 LOTW confirmations. Am I doing something wrong? Is there a bug in DX4WIN? Or is there a problem with LOTW's report ADIF file? 73's Mike, N2GC From [EMAIL PROTECTED] Wed Jun 22 08:26:46 2005 From: [EMAIL PROTECTED] (Timon PA1T) Date: Wed Jun 22 09:57:33 2005 Subject: [Dx4win] dx4win and ft1000mpmv and ft1000mp Message-ID: <[EMAIL PROTECTED]> Gentelmen, I am running a ft1000mp m5 as radio 1 and a ft1000mp as radio 2. Using micraham bandecoders and doubel ten switch box. When I run n1mm contest software at both radio's the cat led is blinking all the time in a normal rithem. When I run dx4win and run the mark 5 as radio 1 the cat is blinking 6 times ans the it stops for about 6 seconds. The second radios cat is blinking ok. When I make radio 2 the 1000 mp radio 1 the cath is blinking one time waits four seconds an blinks again. I think that if a radio is selected that cat has to blink in a normal rithem as it does at the n1mm software. Maybe something for a next update. I am runnig 6.04 73 Timon pa1t Email [EMAIL PROTECTED] Home page www.pa1t.com