I apologise if this question already discussed here before. I just joined the maillist.
I am running v6.03 and would like to do CW keying with it. All soldering for serial port (DB25) CW key interface have been done. But, there seemed no 'dah' exept 'dit' only. Please advise me what setting (in the PREFERENCE) should be done. Or, what MENU in the MP should be changed? Tnx es 73 de Jo, YC0LOW From [EMAIL PROTECTED] Tue Mar 21 18:32:37 2006 From: [EMAIL PROTECTED] (Scott and Lisa Augsburger) Date: Tue Mar 21 18:36:32 2006 Subject: Fw: [Dx4win] DX4WIN 7 and M2 RC2800PX Message-ID: <[EMAIL PROTECTED]> > Hey Marty, > I have this combo and it works great. I am very very happy with this > feature. Except when having a off-set for another antenna and that's a whole > new story. > > A) Make sure you are on EXPERT user level in the main Preferences setup > Parameters screen. > > My comm port speed is set to 9600, 8,None,1 Xon / Xoff. > My computer is set to comm port 3 on a old Gateway 2000 Win 95 486-DX 66 mhz > machine. > I am running 2 comm ports from the computer and a serial card with 2 > comports on it. > 4 total comm ports with DB-9 Radio Shack serial cables. > > Comm port check: > 1) open control panel > 2) double click system > 3) system properties click the device tab > 4) drop down the comm port string > 5) double click the comport you want it to run on > 6) click on the port setting tab check to make sure it is running at the > above settings > 7) click the resources tab > 8) check out the i/o range 03E8 - 03EF, IRQ 09 I have my automatic > settings checked. > 9) Re-boot the computer > > DX4Win set up: > 1) Open preferences > 2) go to the Control tab > 3) Rotor Control drop the box down and select Orion M2 > 4) Comm Port drop the box down and select the comm port you want it to run > on. (com 3) > 5) Message Handshake make sure it is Thunderform. > 6) File Write INI file > 7) Save changes and exit. > 8) A re-boot of the computer may help after doing this. > > I hope this helps you out Marty. This is what works for me. > Let me know. I can help on the phone too if needed. > Scott Augsburger > WR0U > > > >
