Jim: Just wanted to send a thank you for all of the fantastic support you have given all of us this past year!!
Have a Merry Christmas and a Very Happy New Year!! 73 Dave Weiss K3FT From [EMAIL PROTECTED] Sun Dec 9 20:12:13 2007 From: [EMAIL PROTECTED] (Alan Zack) Date: Sun Dec 9 20:23:51 2007 Subject: [Dx4win] Adding QTH info for Direct QSLs References: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Let's say you worked me and want to print a QSO label and an address label. My call, K7ACZ, appears in the callsign window already. You would then also place my call, K7ACZ, in the QSL MGR window and use CTL+E to paste my address in the QSL MGR drop down window, the same as you do when there is a separate manager. When the program recognizes that the call sign and the QSL MGR are the same it will not print K7ACZ VIA K7ACZ on the QSO label but it will print an address label with the address you entered using CTL+E in the QSL MGR window. Pretty slick, eh! _______________________________________________________ Alan Zack Amateur Radio Station K7ACZ Official USCG Auxiliary Comm Station Las Vegas, Nevada, USA Delta Rocket Quality Engineer, The Boeing Company, Retired Aviation Chief Warrant Officer, U.S. Coast Guard, Retired ----- Original Message ----- From: "J.F. Samuels" <[EMAIL PROTECTED]> To: "DX4WIN" <DX4WIN@MAILMAN.QTH.NET> Sent: Friday, December 07, 2007 10:32 AM Subject: [Dx4win] Adding QTH info for Direct QSLs > Gee, I can't remember how to cause the label printing program > to insert the > address labels between QSOs. It does it when there are > managers involved, > but these are just direct cards with no manager involved. It > would look > stupid to use the manager field and it would say, "WM2U via > WM2U", for > example. > > > > How do you do it? > > > > 73, John, K2CIB