Hi all, Sorry, don't have any answer but while we are on the subject, does anyone know how to turn off the printing of the QSL manager address labels WITHOUT turning off the printing of the VIA manager callsign on the regular label? Un-checking "print QSL managers" in the label print options box results in the loss of both. The address labels almost always print slightly off the top of my labels, "look ugly" because they are "top & left heavy", and seem to throw off the alignment of the regular labels. If they formatted better and didn't cause my alignment to go off, I might use them. Can I turn them off?
73 - Tom, W2EQ > > Hi Guys... > > Anybody know how to avoid having addresses on "Manager Address" > labels avoid printing onto the next label to the right side when > the address is quite involved. Good example: Nigel Cawthorne, > G3TXF, has about four or five bits and pieces of address and they > cause the printing to move off the right side of the label. The > fact that all the words aren't on the right label is only > minimally problematic; the real problem is that those words wind > up on the label to the right, rendering it illegible. > > I'd appreciate any info you might have about this. > > Thanks, in advance, > > Karl, K1KO > Virginia Beach > > > > ------------------------------ > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > > End of Dx4win Digest, Vol 46, Issue 13 > **************************************
