Hi, In my log found out that I have over 200 QSO's marked as PSK. Is there a fast easy way to convert them to PSK31?
Thanks, Noel (OM) N3NZ From [EMAIL PROTECTED] Wed Jan 23 06:29:57 2008 From: [EMAIL PROTECTED] (ON4AOI) Date: Wed Jan 23 06:32:27 2008 Subject: [Dx4win] Rig files... more questions. In-Reply-To: <[EMAIL PROTECTED]> References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> Walt, That's why I use 2 Rig files for my IC7800 One with 500Hz for cw-fsk and 2.2Khz for SSB And the other with 250Hz for cw & fsk and 1.8Khz for SSB I change the standard 500Hz quickly to the 250Hz version if needed In my preferences. Guy ON4AOI -----Oorspronkelijk bericht----- Van: K2WK [mailto:[EMAIL PROTECTED] Verzonden: Wednesday, January 23, 2008 12:00 PM Aan: 'ON4AOI' Onderwerp: RE: [Dx4win] Rig files... more questions. Guy, Thank you for the reply and the helpful information. It's unfortunate that one can't change the filter setting per mode. Keep up the good work on informing the community with your wisdom of DX4Win. I learned a lot from your posts. Regards, Walt Kornienko - K2WK Gordonsville, VA -----Original Message----- From: ON4AOI [mailto:[EMAIL PROTECTED] Sent: Wednesday, January 23, 2008 12:24 AM To: [EMAIL PROTECTED] Cc: Dx4win@mailman.qth.net Subject: RE: [Dx4win] Rig files... more questions. Walt, Notes can be added if you edit the rigfile in the database But if you don't know how to do it be carefull. The CW filter setting can be changed with a text editor Open your rigfile with textpad or similar program The number before FD is used for CW.... BUT this also changes the SSB-RTTY filter settings CW 1 = 1.2 Khz 2 = 500 hz 3 = 250 hz This is the command [RC-Set Mode] CSTR=060002FD Guy ON4AOI -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens K2WK Verzonden: Tuesday, January 22, 2008 7:50 PM Aan: dx4win@mailman.qth.net Onderwerp: [Dx4win] Rig files... more questions. Hey all, I was wondering what the meaning of some of the parameters are that make up the rig files, most specifically for the IC-756 Pro III. Some of them are quite self-explanatory, it's the others that puzzle me. Here's my brief list: 1) "NOTES=Selects narrow filter for CW/SSB." How is this done, i.e. what command is sent to the rig and how does that work? Personally, I'd like the rig to go to the Wide CW Filter. How and where do I change this in the rig file or how do I send a CI-V command to accomplish same? 2) RMUL= 1.00000000000000E+0000 and WMUL= 1.00000000000000E+0000 What are these multipliers? 3) RITSCL= 1.00000000000000E+0000 Hmmm, what does this do? I have access to the CI-V command set, but have never tried sending commands to the radio, any suggestions? 73 de Walt - K2WK _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win