Alan, When I have time this weekend I will have a look and When I find things that can be changed I try with ON4IQ
Guy ON4AOI -----Oorspronkelijk bericht----- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Namens Alan Sewell N5NA Verzonden: woensdag 27 augustus 2008 20:27 Aan: [EMAIL PROTECTED] CC: Dx4win-Admin Onderwerp: Re: [Dx4win] Omni VII David, I came up with a half working Omni VII rig file a while ago. It's not 100% but it's better than nothing. You can download it at http://www.tentecwiki.org/doku.php?id=588dx4win . 73, Alan N5NA http://www.tentecwiki.org David Warr wrote: > Hello, > > Does anyone know the settings to get the Omni VII talking to Dx4Win. I've > tried setting the baud rate to 57600 > and the address to 00 but nothing. I have output from the Omni as I can see > it on my microham interface > > Any ideas > > David > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.6.9/1636 - Release Date: 26/08/2008 19:09 No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 270.6.9/1636 - Release Date: 26/08/2008 19:09 _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
