I believe Paul swapped the commands to send freq and mode from 7.05 to 7.06:
"The radio driver now writes the frequency first followed by the mode; this change was needed for K3 radios" This could be the cause of the difference you noticed. - Jim On Mon, Dec 8, 2008 at 2:01 PM, Louis Dietrich <[EMAIL PROTECTED]> wrote: > DX4Winers, > and Paul > > I am experiencing some problems with the latest version... > > Using identical rig files, as we used in 7.05.03 , here's what is happening > in 7.06.02. > > 1. If the rig is on SSB and I click on a CW spot, say 7044, the rig goes > to 7044.7. If I click on the same spot again, the rig shows 7044... > 2. If I then click on another CW spot, the rig goes to the correct > frequency. > 3. If I then click on a SSB spot 14185 (Rig still on CW), the rig goes > to 14184.3. If I click on the same spot, the frequency read 14185... > > Something has changed in the latest version of DX4WIN.... > > I have switched back and forth between the versions...and have the same rig > files in both.... > > Can anyone else verify the above? > > 73 > > Lou N2TU -- Jim Reisert AD1C/Ø, <[EMAIL PROTECTED]>, http://www.ad1c.us _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win