Kostas, What you are trying to do will probably never work with comportemulation, I used to work with comportemulator b4 mmtty was supported by DX4WIN The connection between mmtty and dx4win was with 2 virtual comports And the reel connection to the radio was with a existing comport
In short only one program was communicating with the radio In a serial string it could work but not both in parallel. This was on my webpage years ago how to setup, but after mmtty was supported I removed it, probably in one of my backups I will find it Guy ON4AOI -----Oorspronkelijk bericht----- Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] Namens Kostas SV1DPI Verzonden: woensdag 17 december 2008 11:57 Aan: REFLECTOR dx4win Onderwerp: Re: [Dx4win] ADIF to DX4WIN log conversion version 3.1 I would like to have a band map also. When you sort the spots you will see many spots for the same station and you have not an easy way to check all the band. It helps just to know what a station is when you listen a qso or a pileup. By the way ve3nea sells a program called band master. The bad news are that it needs to have radio control and there is no way (?) both programs band master and dx4win have radio control over the same port. ve3nea gives omnirig for free to make the trick but dx4win doesn't support it. Maybe the only way is a program which gives virtual com ports. So this way you must setup dx4win to see vitual com port 8 and band master to see virtual port 7. then we will have Virtual ports 7 and 8 to be directed to port 1 where the radio is connected. The problem is that i have not found a free program to do it that really works without other problems. Anyone who have tried one and it is free? I can find some of them in internet but the first one i had tried, messed my com ports after installed Kostas sv1dpi ----- Original Message ----- From: "Rick Craig" <rick.cr...@n6nd.com> To: "Jim Reisert AD1C" <jjreis...@alum.mit.edu>; "Bill NY9H" <n...@arrl.net> Cc: "DX4WIN" <dx4win@mailman.qth.net> Sent: Wednesday, December 17, 2008 3:28 AM Subject: Re: [Dx4win] ADIF to DX4WIN log conversion version 3.1 > No, not even close.... > > Rick, N6ND > > At 12:40 PM 12/16/2008, Jim Reisert AD1C wrote: >>If you sort the DX Spots window by frequency, you essentially have a >>Band Map, no? >> >>73 - Jim AD1C >> >>On Tue, Dec 16, 2008 at 1:08 PM, Bill NY9H <n...@arrl.net> wrote: >> >> > Not being a contester.... the only thing I'd like to see added is a >> > band >> > map. I use other programs , but would be nice to have integrated >> > within. >> >>-- >>Jim Reisert AD1C/Ø, <jjreis...@alum.mit.edu>, http://www.ad1c.us >>"Let Not Mankind Bogart Love" - Willie Nelson >>_______________________________________________ >>Dx4win mailing list >>Dx4win@mailman.qth.net >>http://mailman.qth.net/mailman/listinfo/dx4win > > n6nd at arrl dot net > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > > _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win