John, I have the same issue with the QRZ CD. Did you ever get an answer? Buddy/K4CJB
Is the UPDATE QSO button highlighted or grayed out? In my case I get my QSL info from the GOLIST. When QSL info is available there is a note to the effect: ----QSL info from: C:\GOLIST\GOWIN32.DLL If the info is there the UPDATE QSO button is highlighted and when clicked will fill in the State, County, Grid, etc, info. This only works for US calls. _______________________________________________________ Alan Zack Amateur Radio Station K7ACZ Official USCG Auxiliary Comm Station Las Vegas, Nevada, USA Delta Rocket Quality Engineer, The Boeing Company, Retired Aviation Chief Warrant Officer, U.S. Coast Guard, Retired ----------------------------------------------------------------------------------------------- ----- Original Message ----- > Hi Larry - > > Thanks for the tip and information, but I must have an option > somewhere not > set or something. For example, when I type your call into the callsign > field and then hit F3, all of your info is shown in the lookup window, > but > absolutely nothing in the QSO window gets populated when I hit the > update > button.... Still trying to figure out what's going on. > > tnx es 73 - John, W4AU > > > At 08:09 AM 2/3/2009, Larry Gauthier \(K8UT\) wrote: >>John, >> >>Which fields get updated depends on what information is available in >>the >>lookup window and what fields are already filled in the QSO window. >> >>For example - using your callsign: Pressing <Update QSO> populates the >>state, county, grid, and name fields. If any of those fields are >>already >>populated, they are not overwritten. >> >>-larry >>K8UT >>----- Original Message ----- From: "John Unger" <w...@verizon.net> >>To: <Dx4win@mailman.qth.net> >>Sent: Tuesday, February 03, 2009 07:48 >>Subject: [Dx4win] F3 and "Update QSO" button >> >> >>>When a bring up a contact, either old or new, in the QSO window and >>>hit F3 >>>to open the "Callsign /Mgr lookup" window, DX4WIN goes to my CD >>>callsign >>>database and put the information in the lookup window fine. >>> >>>Somehow I expected the "Update QSO" button in the lookup window to >>>copy the >>>address, etc., information into the "Notes for this Call" field in >>>the QSO >>>window. This action doesn't occur. Is it supposed to? What does the >>>Update >>>button actually update? >>> >>>tnx es 73 - John, W4AU >>> > ------------------------------ Message: 2 Date: Sun, 08 Feb 2009 08:54:40 -0500 Hi Alan - Thanks for the help. In my case, I get my QSL information from a Buckmaster CD. When I type in a US call and press the F3 key, the update window comes up with the UPDATE QSO button highlighted, the address information is shown, and a note saying: ----QSL info from: Hamcal32.dll. Then when I click on the UPDATE QSO button nothing happens to the blank fields in the QSO window, i.e., nothing is filled in from the information shown in the update window... Still trying to figure out what is not happening and why. tnx es 73 - John, W4AU At 08:13 PM 2/7/2009, Alan Zack wrote: >Is the UPDATE QSO button highlighted or grayed out? In my case I get my >QSL info from the GOLIST. When QSL info is available there is a note to >the effect: >----QSL info from: C:\GOLIST\GOWIN32.DLL >If the info is there the UPDATE QSO button is highlighted and when clicked >will fill in the State, County, Grid, etc, info. This only works for US calls. > >_______________________________________________________ >Alan Zack >Amateur Radio Station K7ACZ >Official USCG Auxiliary Comm Station >Las Vegas, Nevada, USA >Delta Rocket Quality Engineer, The Boeing Company, Retired >Aviation Chief Warrant Officer, U.S. Coast Guard, Retired > > >----------------------------------------------------------------------------------------------- > >----- Original Message ----- From: "John Unger" <w...@verizon.net> >To: "Larry Gauthier (K8UT)" <k...@arrl.net> >Cc: <Dx4win@mailman.qth.net> >Sent: Tuesday, February 03, 2009 2:51 PM >Subject: Re: [Dx4win] F3 and "Update QSO" button > > >>Hi Larry - >> >>Thanks for the tip and information, but I must have an option somewhere not >>set or something. For example, when I type your call into the callsign >>field and then hit F3, all of your info is shown in the lookup window, but >>absolutely nothing in the QSO window gets populated when I hit the update >>button.... Still trying to figure out what's going on. >> >>tnx es 73 - John, W4AU >> >> >>At 08:09 AM 2/3/2009, Larry Gauthier \(K8UT\) wrote: >>>John, >>> >>>Which fields get updated depends on what information is available in the >>>lookup window and what fields are already filled in the QSO window. >>> >>>For example - using your callsign: Pressing <Update QSO> populates the >>>state, county, grid, and name fields. If any of those fields are already >>>populated, they are not overwritten. >>> >>>-larry >>>K8UT >>>----- Original Message ----- From: "John Unger" <w...@verizon.net> >>>To: <Dx4win@mailman.qth.net> >>>Sent: Tuesday, February 03, 2009 07:48 >>>Subject: [Dx4win] F3 and "Update QSO" button >>> >>> >>>>When a bring up a contact, either old or new, in the QSO window and hit F3 >>>>to open the "Callsign /Mgr lookup" window, DX4WIN goes to my CD callsign >>>>database and put the information in the lookup window fine. >>>> >>>>Somehow I expected the "Update QSO" button in the lookup window to copy the >>>>address, etc., information into the "Notes for this Call" field in the QSO >>>>window. This action doesn't occur. Is it supposed to? What does the Update >>>>button actually update? >>>> >>>>tnx es 73 - John, W4AU > > > >No virus found in this incoming message. >Checked by AVG - www.avg.com >Version: 8.0.233 / Virus Database: 270.10.19/1939 - Release Date: 02/04/09 >16:35:00 ------------------------------ _______________________________________________ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win End of Dx4win Digest, Vol 58, Issue 6 *************************************
______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
