PLease help. I installed into my FLYBOOK the new release 8.01. The installation run correctly, but when I launch it the X error message appear. <<<APPLICATION NOT CORRECTLY INIZIALIZED (0xc0150002). PRESS <OK> TO CLOSE IT>>> Tried many times, same error.
Can you explain it? The FLYBOOK is working under XP HOME SP3 - 512 RAM - 995 MHZ CLOCK. The relase 5 was working correctly. Please note that I use 8.01 on my Dektop PC and on my Ibm Notebok with no problerm. Many thanks for supporting. 73 Lorenzo ik1mdf ----- Original Message ----- From: <dx4win-requ...@mailman.qth.net> To: <dx4win@mailman.qth.net> Sent: Thursday, August 13, 2009 3:07 AM Subject: Dx4win Digest, Vol 64, Issue 48 > Send Dx4win mailing list submissions to > dx4win@mailman.qth.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://mailman.qth.net/mailman/listinfo/dx4win > or, via email, send a message with subject or body 'help' to > dx4win-requ...@mailman.qth.net > > You can reach the person managing the list at > dx4win-ow...@mailman.qth.net > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Dx4win digest..." > > > Today's Topics: > > 1. Re: I'm scare to start with Version 8 (Jim Reisert AD1C) > 2. Re: I'm scare to start with Version 8 (Bob) > 3. Re: 7O1YGF Approved for DXCC Credit (Jim Reisert AD1C) > 4. Ver. 8.1 at start. (Stefano Cipriani) > 5. Re: Ver. 8.1 at start. (Jim Reisert AD1C) > 6. Ver.8.1 - Groups - Import - Unexpected selection. > (Stefano Cipriani) > 7. Re: Ver.8.1 - Groups - Import - Unexpected selection. > (Jim Reisert AD1C) > 8. Re: 7O1YGF Approved for DXCC Credit (Terry Dunlap) > 9. Re: 7O1YGF Approved for DXCC Credit (David Tilley) > 10. BandMap wildly wrong freq? (Rick Murphy) > 11. Re: 7O1YGF Approved for DXCC Credit (Jim Reisert AD1C) > 12. Re: BandMap wildly wrong freq? (Mel) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 12 Aug 2009 16:32:10 -0600 > From: Jim Reisert AD1C <jjreis...@alum.mit.edu> > Subject: Re: [Dx4win] I'm scare to start with Version 8 > To: Marc Wullaert ON4MA <marc.wullae...@telenet.be> > Cc: dx4win@mailman.qth.net > Message-ID: > <806a89db0908121532p5b8a6466pab7736481814b...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Hi Marc, > > You have the option to install 8.01 in a directory separate from your > old version. If you run into bad problems with 8, just go back to the > previous version until they can be resolved. > > The biggest problems are in the report manager, and the conversions of > name, QTH and frequency. If you wait to do the conversion and can live > with the small report problems, then you will probably be pretty > happy. > > 73 - Jim AD1C > > On Wed, Aug 12, 2009 at 4:14 PM, Marc Wullaert > ON4MA<marc.wullae...@telenet.be> wrote: >> Hi folks .... >> >> >> I'm scare to switch over to version 8. I have the new key but i see in my >> mailbox more than >> 300msg to read about '' dx4win ver 8.0". >> >> Is it working ? >> >> marc ON4MA > > -- > Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us > > > ------------------------------ > > Message: 2 > Date: Wed, 12 Aug 2009 19:09:05 -0400 > From: Bob <robertlar...@att.net> > Subject: Re: [Dx4win] I'm scare to start with Version 8 > To: Marc Wullaert ON4MA <marc.wullae...@telenet.be> > Cc: dx4win@mailman.qth.net > Message-ID: <4a834b91.5080...@att.net> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi Marc, > > Since you already have purchased the key it is OK to > install it. It will install in a separate directory in the root > directory . My old version ( 5.02) was and still is in a directory > under the program files. So both versions are available and run from > separate shortcuts on my desktop. > > I have an issue with the reports but in many ways are > happy with the new reports. I feel my issues will be addressed and they > are not a show stopper. > > Back it up before you start and follow these notes and > you should be just fine with both version. > > > http://dx4win.ad1c.us/appnotes/upgrade.htm > > 73, > Bob > K2TK > > > Marc Wullaert ON4MA wrote: >> Hi folks .... >> >> >> I'm scare to switch over to version 8. I have the new key but i see in my >> mailbox more than >> 300msg to read about '' dx4win ver 8.0". >> >> Is it working ? >> >> marc ON4MA >> >> >> >> > > > > ------------------------------ > > Message: 3 > Date: Wed, 12 Aug 2009 17:12:34 -0600 > From: Jim Reisert AD1C <jjreis...@alum.mit.edu> > Subject: Re: [Dx4win] 7O1YGF Approved for DXCC Credit > To: W9RPM <j...@w9rpm.com> > Cc: DX4WIN Reflector <dx4win@mailman.qth.net> > Message-ID: > <806a89db0908121612n2c19aa8dn66de93ea5b103...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > On Wed, Aug 12, 2009 at 5:09 PM, W9RPM<j...@w9rpm.com> wrote: > >> Jim, How do I change this to valid DX. I worked them, but put them down >> as >> invalid DX. Thanks- John > > Expand the QSO window using F5 until you see the award flags. > > Use F8 to search for 7O1YGF. > > If you're using 8.01, change all three DXCC flags (Mixed/Band/Mode) > from "I" to "--". > > If using an earlier version, find the "Invalid DX" flag and change it to > "N". > > 73 - Jim AD1C > > -- > Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us > > > ------------------------------ > > Message: 4 > Date: Thu, 13 Aug 2009 01:21:59 +0200 > From: "Stefano Cipriani" <i0...@email.it> > Subject: [Dx4win] Ver. 8.1 at start. > To: "DX4WIN Reflector" <dx4win@mailman.qth.net> > Message-ID: <3e1b10ec57214f42b4027efafc386...@i0mwisteve01> > Content-Type: text/plain; charset="iso-8859-1" > > Paul, > starting the program, the focus is not in the QSO window. > We must clic on the window to activate it. > All ok in previous version. > Stefano, I0MWI > > > > > -- > Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP > autenticato? GRATIS solo con Email.it http://www.email.it/f > > Sponsor: > Per il tuo cellulare c'? m.email, hai tutto il web e la posta elettronica > nella tua mano. Provalo gratuitamente > Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=8922&d=13-8 > > > ------------------------------ > > Message: 5 > Date: Wed, 12 Aug 2009 17:28:50 -0600 > From: Jim Reisert AD1C <jjreis...@alum.mit.edu> > Subject: Re: [Dx4win] Ver. 8.1 at start. > To: Stefano Cipriani <i0...@email.it> > Cc: DX4WIN Reflector <dx4win@mailman.qth.net> > Message-ID: > <806a89db0908121628m1bc7c8f3g7fa4d2f706bfd...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > On Wed, Aug 12, 2009 at 5:21 PM, Stefano Cipriani <i0...@email.it> wrote: > >> starting the program, the focus is not in the QSO window. >> We must clic on the window to activate it. >> All ok in previous version. > > Hi Stefano, > > Why is this a problem? Don't you need to either use F9 or the QSO > menu to start logging new QSOs? By doing so, focus shifts to the QSO > window. > > 73 - Jim AD1C > > -- > Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us > > > ------------------------------ > > Message: 6 > Date: Thu, 13 Aug 2009 01:47:44 +0200 > From: "Stefano Cipriani" <i0...@email.it> > Subject: [Dx4win] Ver.8.1 - Groups - Import - Unexpected selection. > To: "DX4WIN Reflector" <dx4win@mailman.qth.net> > Message-ID: <2b75ca5394264dedbb67d7fcbb6ae...@i0mwisteve01> > Content-Type: text/plain; charset="iso-8859-1" > > Paul ... and BetaTesters (!), > Very strange result found: > 1? - Exported a selected group 001 from my V.8.1 log, > using a DX4WIN8 export file.(I0MWI_001.DXQ) > 2? - File / New log, creating a new I0MWI_TEST.DXL > 3? - Added a dummy qso in group 000. > 4? - Edit/Add more groups (001 - 002 - 003 - 004) > 5? - Exit the program > 6? - Open again and import the I0MWI_001.DXQ. > 7? - Deleted the dummy qso. > 8? - Exit, then open again the I0MWI_TEST.DXL > 9? - The program show only the QSOs, that have the > new field "Freq KHz" populated with a frequency. > NOT FILTER ACTIVATED, but is necessary go to > Filter/Cancel filter to have all QSOs selected. > This happen any time I open the I0MWI_TEST.DXL.... > > If I open the regular I0MWI.DXL, mouved from vers. 7 > all is OK........ > > So Good Hunting............ > 73 > Stefano, I0MWI > > > > -- > Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP > autenticato? GRATIS solo con Email.it http://www.email.it/f > > Sponsor: > Servizi Internet sul tuo cellulare con m.email, installalo gratuitamente e > fai nuove scoperte > Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=8921&d=13-8 > > > ------------------------------ > > Message: 7 > Date: Wed, 12 Aug 2009 18:03:49 -0600 > From: Jim Reisert AD1C <jjreis...@alum.mit.edu> > Subject: Re: [Dx4win] Ver.8.1 - Groups - Import - Unexpected > selection. > To: Stefano Cipriani <i0...@email.it> > Cc: DX4WIN Reflector <dx4win@mailman.qth.net> > Message-ID: > <806a89db0908121703l61144f74gbc235d652f43b...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > This is due to the "," in the Frequency field (European Windows > versions). Been discussed on the reflector before. I'm sure it's on > Paul's list. > > 73 - Jim AD1C > > On Wed, Aug 12, 2009 at 5:47 PM, Stefano Cipriani<i0...@email.it> wrote: >> Paul ... and BetaTesters (!), >> Very strange result found: >> 1? - Exported a selected group 001 from my V.8.1 log, >> using a DX4WIN8 export file.(I0MWI_001.DXQ) >> 2? - File / New log, creating a new I0MWI_TEST.DXL >> 3? - Added a dummy qso in group 000. >> 4? - Edit/Add more groups (001 - 002 - 003 - 004) >> 5? - Exit the program >> 6? - Open again and import ?the I0MWI_001.DXQ. >> 7? - Deleted the dummy qso. >> 8? - Exit, then open again the I0MWI_TEST.DXL >> 9? - The program show only the QSOs, that have the >> new field "Freq KHz" populated with a frequency. >> NOT FILTER ACTIVATED, but is necessary go to >> Filter/Cancel filter to have all QSOs selected. >> This happen any time I open the I0MWI_TEST.DXL.... >> >> If I open the regular I0MWI.DXL, mouved from vers. 7 >> all is OK........ >> >> So Good Hunting............ >> 73 >> Stefano, I0MWI > > > -- > Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us > > > ------------------------------ > > Message: 8 > Date: Wed, 12 Aug 2009 17:11:52 -0700 > From: Terry Dunlap <te...@kk6t.com> > Subject: Re: [Dx4win] 7O1YGF Approved for DXCC Credit > To: Jim Reisert AD1C <jjreis...@alum.mit.edu> > Cc: DX4WIN Reflector <dx4win@mailman.qth.net> > Message-ID: <4a835a48.1050...@kk6t.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Jim, > > I think you mean "If using an earlier version, change the 'ValidDX' flag > from Invalid to Valid" > > 73 de Terry KK6T > > PS - This is great news!!! > > Jim Reisert AD1C wrote: >> On Wed, Aug 12, 2009 at 5:09 PM, W9RPM<j...@w9rpm.com> wrote: >> >> >>> Jim, How do I change this to valid DX. I worked them, but put them down >>> as >>> invalid DX. Thanks- John >>> >> >> Expand the QSO window using F5 until you see the award flags. >> >> Use F8 to search for 7O1YGF. >> >> If you're using 8.01, change all three DXCC flags (Mixed/Band/Mode) >> from "I" to "--". >> >> If using an earlier version, find the "Invalid DX" flag and change it to >> "N". >> >> 73 - Jim AD1C >> >> > > > ------------------------------ > > Message: 9 > Date: Wed, 12 Aug 2009 20:18:12 -0400 > From: David Tilley <b1blanc...@earthlink.net> > Subject: Re: [Dx4win] 7O1YGF Approved for DXCC Credit > To: DX4WIN Reflector <dx4win@mailman.qth.net> > Message-ID: <4a835bc4.1060...@earthlink.net> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > I don't see anything on the ARRL website saying that 7O1YGF is being > accepted. Where is that information coming from? > > > ------------------------------ > > Message: 10 > Date: Wed, 12 Aug 2009 20:19:13 -0400 > From: Rick Murphy <k...@arrl.net> > Subject: [Dx4win] BandMap wildly wrong freq? > To: DX4WIN <dx4win@mailman.qth.net> > Message-ID: > <3c51c69b0908121719v1ecdac79q8fe9d5751b865...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > I'm just starting out with DX4WIN 8; the rig is a IC-756 Pro III. > When I use the bandmap with "Follow radio" checked, it's pretty broken > due to completely wrong frequencies. > > For example, the rig is showing 50.125 Mhz right now. The band map > says "717,415.56 6m". It's sort of stable at that reading (sometimes > showing the right freq, usually not) until I spin the dial, then it'll > catch up for a few seconds until going to another bogus frequency. > > There's a pattern - usually 717,xxxx for 6m. Or, switching the rig to > 20m (14,004.00) shows "475,416.56 20m". Or "1,400,526.00 20m". > (Currently it's swithcing between "14,005.08", "1,400,508.00", and > "475,416.56" in the bandmap.) > > The rig is set with default address, 9600 baud, CI-V transceive off. > DX4WIN set to poll at 5000 ms. > > How do I make this work right? Seems like a useful feature if it was > actually usable. :-) > 73, > -Rick > -- > Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA > > > ------------------------------ > > Message: 11 > Date: Wed, 12 Aug 2009 18:20:06 -0600 > From: Jim Reisert AD1C <jjreis...@alum.mit.edu> > Subject: Re: [Dx4win] 7O1YGF Approved for DXCC Credit > To: Terry Dunlap <te...@kk6t.com> > Cc: DX4WIN Reflector <dx4win@mailman.qth.net> > Message-ID: > <806a89db0908121720gf6b999l1eda17874e3ba...@mail.gmail.com> > Content-Type: text/plain; charset=ISO-8859-1 > > Thanks for the correction, Terry. I was typing from my (poor) memory. > > - Jim > > On Wed, Aug 12, 2009 at 6:11 PM, Terry Dunlap<te...@kk6t.com> wrote: >> Jim, >> >> I think you mean "If using an earlier version, change the 'ValidDX' flag >> from Invalid to Valid" >> >> 73 de Terry KK6T >> >> PS - This is great news!!! >> >> Jim Reisert AD1C wrote: >>> >>> On Wed, Aug 12, 2009 at 5:09 PM, W9RPM<j...@w9rpm.com> wrote: >>> >>> >>>> >>>> Jim, How do I change this to valid DX. I worked them, but put them down >>>> as invalid DX. Thanks- John >>>> >>> >>> Expand the QSO window using F5 until you see the award flags. >>> >>> Use F8 to search for 7O1YGF. >>> >>> If you're using 8.01, change all three DXCC flags (Mixed/Band/Mode) >>> from "I" to "--". >>> >>> If using an earlier version, find the "Invalid DX" flag and change it to >>> "N". > > -- > Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us > > > ------------------------------ > > Message: 12 > Date: Wed, 12 Aug 2009 21:07:22 -0400 > From: Mel <ve...@videotron.ca> > Subject: Re: [Dx4win] BandMap wildly wrong freq? > To: Rick Murphy <k...@arrl.net> > Cc: DX4WIN <dx4win@mailman.qth.net> > Message-ID: <4a83674a.8030...@videotron.ca> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > It sounds like you have the CI-V transceive function turned on causing > data collisions. This is not recommended with DX4Win. Turn it off as per > instructions and it should work fine. I would prefer Paul support > transceive mode... but that isn't likely to happen soon... > > VE2DC... Mel > > Rick Murphy wrote: >> I'm just starting out with DX4WIN 8; the rig is a IC-756 Pro III. >> When I use the bandmap with "Follow radio" checked, it's pretty broken >> due to completely wrong frequencies. >> >> For example, the rig is showing 50.125 Mhz right now. The band map >> says "717,415.56 6m". It's sort of stable at that reading (sometimes >> showing the right freq, usually not) until I spin the dial, then it'll >> catch up for a few seconds until going to another bogus frequency. >> >> There's a pattern - usually 717,xxxx for 6m. Or, switching the rig to >> 20m (14,004.00) shows "475,416.56 20m". Or "1,400,526.00 20m". >> (Currently it's swithcing between "14,005.08", "1,400,508.00", and >> "475,416.56" in the bandmap.) >> >> The rig is set with default address, 9600 baud, CI-V transceive off. >> DX4WIN set to poll at 5000 ms. >> >> How do I make this work right? Seems like a useful feature if it was >> actually usable. :-) >> 73, >> -Rick > > > ------------------------------ > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win > > > End of Dx4win Digest, Vol 64, Issue 48 > ************************************** > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
