Tried it here and it works fine. In fact I notice a major improvement. You can now use the same COM port for radio control and CW. I use RTS to supply power to the interface and DTR to key the CW line. I believe this is new in Ver 8.03. This is going to be real handy with my laptop which only has one COM port (which is one more than most ;-).
Peter Archibald wrote: > Jim: > > Using DX4WIN on com port. Same setup in 8.02, no problems. > > Peter/W4ZGR > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
