in field "prefix" you must put the !K (have in mind that there are some versions of country file with W as main prefix for USA. If you have such a file change the K with W) Also fill the date field to get the qsos you want and after that with the filter active "set qsl label flag"
Kostas sv1dpi ----- Original Message ----- From: "Mike Streeter" <wm...@yahoo.com> To: <dx4win@mailman.qth.net> Sent: Monday, February 15, 2010 9:34 PM Subject: [Dx4win] Print qsl label filtering. >I run DX4WIN version 6.03.7 (yes, it's old). > > I have just imported 700 qso's from Writelog. They are a mix of Stateside > and DX contacts. I want to set up to print labels only for the DX > contacts. > > I have done it before but not for a couple of years and have forgotton > how. I recall I had to fill in !K somewhere. > > Please advise on how to set this up so I don't have to go to every contact > and change 'label' from Y to N. > > Many thanks, > > Mike, WM5DX. > > > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
