Bud, have you read the MMTTY application note:
http://dx4win.ad1c.us/
If you have MMTTY working stand-alone, you're half-way there. Make
sure the COM port you are using for PTT/FSK isn't being used by
anything else (check your preferences).
73 - Jim AD1C
On Fri, Jun 18, 2010 at 10:50 PM, Bud Governale, W3LL <w...@arrl.net> wrote:
> I'm trying to get DX4WIN to key MMTTY on my IC-7000.
> When clicking on a DX4WIN macro RTTY button, I can hear the tones playing but
> the Icom IC-7000 is not being keyed.
>
> I have the path to the MMTTY executable set in the DX4WIN RTTY preference
> window.
>
> I can open the MMTTY program and send RTTY FSK directly from MMTTY. This
> indicates that the two transistor FSK keying
> cable (PTT and FSK) is functioning properly thru its com port.
> If DX4WIN is open at the same time then the MMTTY program cannot open its com
> port. I have to close DX4WIN to use MMTTY
> as a stand alone program.
>
> I can send CW properly in DX4WIN thru the FSK keying cable com port.
> I don't understand why DX4WIN cannot key MMTTY.
>
> What am I doing wrong?
>
> 73,
>
> Bud W3LL
> w...@arrl.net
--
Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us
______________________________________________________________
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
