On Mon, Dec 20, 2010 at 3:06 PM, Jim Reisert AD1C <jjreis...@alum.mit.edu> wrote:
> On Mon, Dec 20, 2010 at 1:50 PM, R.T.Liddy <k...@ameritech.net> wrote: > >> Also, DX4WIN complains about talking to my Radio (ICOM-7700). I get an error >> that says, >> "Radio timed out. Radio interface has been disabled". In the preferences, I >> selected both >> types of 7700 and set the Hex Address correctly as 74h. My interface works >> OK with >> CTWin and also with CT-DOS (previous computer). > > Is the baud rate correct? The default baud rate is 4800 baud, and the > radio should be programmed to 4800 baud as well (not auto). If you > want to change the baud rate in DX4WIN, you have to uncheck the > default baud rate box. Also play with the DTR/RTS check boxes, try all four combinations. If you are using a real ICOM CI-V interface, then this should not be necessary. -- Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html