I cannot seem to get CW to key after the upgrade from ver.7.02 (and previous) which have always upgraded w/ no problems. Within Setup Parameters|CW I choose DX4win and LPT1 as I have always done. I noticed that once I: 1. Move up or down in the selections of Setup Parameters|CW and return to the CW tab, the LPT1 selection is...gone. 2. When I exit Setup Parameters, of course saving the changes and go to test CW: No CW..
For some reason the LPT1 setting is not being saved. What is "1/2 Signal | None or Reverse" ? I had "1/2 signal" selected in my previous version. Why? I don't recall. None of these seem to affect my problem above. The upgrade has been registered. Any ideas before I go back to my previous version? 73 de Mike, K5UO braga...@consolidated.net ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
