After many years of using DX4WIN I decided to connect it to my radios. Running 8.05, radio is a K3, baud rate 38400 on a real Com1. This works fine with Writelog and Win-test.
I open the band map, follow radio is checked. It initially opens on some other band than the radio is set for. If I click on a call in the bandmap the radio goes there and moving the VFO makes the red arrow move. But if I click on the log window and delete the QSO added when I first clicked on the bandmap the red arrow no longer follows the VFO. It will start working again if I click on another call in the bandmap. If I click on add QSO real time it always picks up the correct frequency. Is this how it should work or did I miss something in the setup? Paul W2LE ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
