The MMTTY reflector http://groups.yahoo.com/group/MMTTY/ contains a wealth of information and is full of very helpful people. If you can't find a solution here, that would be a highly-recommended source of help.
Dick At 04:39 AM 4/22/2011, Antonio Galiana wrote: >Hello Group. >I Need some advice please: > >Here I have instaled DX4WIN 8.05 into a new computer running Windows XP. >As hardware I have a Microham MK2R+ and FT1000D >MK2R+ is conneceted via USB. > >If I run MMTTY as an standalone program all works fine, in the FT1000D I use >RTTY/LSB and I can work RTTY perfectly. > >Through DX4WIN all goes fine except RTTY. RX is ok, but when I want to send >RTTY the transceiver goes into TX but just a continuous carrier. Nothing >else. (RTTY/LSB selected) >If I choose PKT/LSB I can both RX & TX without problem but then when real >time logging, PACK mode appears in DX4 logging window. > >One thing that it could be important (??) is that when DX4WIN is running and >I go to the "RTTY Control panel" window > SETUP (O), in the MMTTY "MISC" >tab, into the TX-PORT box, only "Sound" is marked, others are greyed out. >But running MMTTY as standalone, the TX-PORT Box shows "COM-TxD(FSK) and USB >port "Limited Speed". > >Any idea? This issue is driving me crazy... > > >-- >*73 de Tony* >*EA5BY >Skype: ea5by.tony > >* >______________________________________________________________ >Dx4win mailing list >Home: http://mailman.qth.net/mailman/listinfo/dx4win >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Dx4win@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html -- Dick Flanagan K7VC d...@k7vc.com ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
