I believe it is relatively easy to make a homebrew interface to drive PW1 from an Ten Tec Orion ii. Orion ii (as i read in the manual) has band data in back side. I saw also that you can drive a relay for every band. So you can simply a voltage and some resistors to get the voltage you want for every band. PW-1 needs a pecific voltage in every band to remote connector to recognise in which band the rig is. See this page for the specific voltages if you are interested http://www.geekshed.co.uk/icom-ci-v-or-band-data-to-yaesu-bcd-band-data-converter/
73 Kostas sv1dpi ----- Original Message ----- From: "George" <goofy...@rochester.rr.com> To: <dx4win@mailman.qth.net> Sent: Sunday, March 25, 2012 2:49 PM Subject: [Dx4win] control of a PW-1 amp using a ORion-2 >I wonder if Paul has any intention of including control of the PW-1 amp >from > non Icom transceivers? It could be included in the CONTROL of the > PREFERENCES to send a CI-V command out a serial port and then be level > converted to a CI-V cable to the PW-1. > Anyone heard of this request? > Thanks. > > George W2YJ > > > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
